Re: [PATCH] Add support for Korenix 16C950-based PCI cards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Wed, Dec 20, 2006 at 04:33:10PM +0300, Andrey Panin wrote:
> On 347, 12 13, 2006 at 02:45:46PM +0000, Russell King wrote:
> > Linus, Andrew,
> > 
> > This patch adds initial support to 8250-pci for the Korenix Jetcard PCI
> > serial cards.  The JC12xx cards are standard RS232-based serial cards
> > utilising the Oxford 16C950 device.
> > 
> > The JC14xx are RS422/RS485-based cards, but in order for these to be
> > supported natively, we will need additional tweaks to the 8250 layers
> > so we can specify some values for the 950's registers.  Hence, these
> > two entries are commented out.
> IIRC 16c950 just need two bits in ACR set properly. Will attached patch 
> do the trick ?

I, too, also have a patch which does something similar.  I'm going to
hold off on that until post 2.6.20 though, especially as I have no
way to test it.

Russell King
 Linux kernel    2.6 ARM Linux   -
 maintainer of:
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at
Please read the FAQ at

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux