[PATCH 3/5] i386: move startup_32() in text.head section

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




o Entry startup_32 was in .text section but it was accessing some init
  data too and it prompts MODPOST to generate compilation warnings.

WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100029) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100037) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to
.init.data:init_pg_tables_end from .text between '_text' (at offset
0xc0100099) and 'startup_32_smp'

o Can't move startup_32 to .init.text as this entry point has to be at the
  start of bzImage. Hence moved startup_32 to a new section .text.head and
  instructed MODPOST to not to generate warnings if init data is being 
  accessed from .text.head section. This code has been audited.

o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug
  is not supported. Otherwise it generates more warnings

WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100126) and 'is486'
WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100130) and 'is486'

Signed-off-by: Vivek Goyal <[email protected]>
---

 arch/i386/kernel/head.S        |   17 ++++++++++++++---
 arch/i386/kernel/vmlinux.lds.S |    7 ++++++-
 scripts/mod/modpost.c          |   10 +++++++++-
 3 files changed, 29 insertions(+), 5 deletions(-)

diff -puN arch/i386/kernel/head.S~i386-reloc-kernel-move-startup_32-in-text-head arch/i386/kernel/head.S
--- linux-2.6.19-rc1-reloc/arch/i386/kernel/head.S~i386-reloc-kernel-move-startup_32-in-text-head	2006-12-15 14:09:01.000000000 +0530
+++ linux-2.6.19-rc1-reloc-root/arch/i386/kernel/head.S	2006-12-15 14:09:01.000000000 +0530
@@ -53,6 +53,7 @@
  * any particular GDT layout, because we load our own as soon as we
  * can.
  */
+.section .text.head
 ENTRY(startup_32)
 
 #ifdef CONFIG_PARAVIRT
@@ -141,16 +142,25 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	jb 10b
 	movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
 
-#ifdef CONFIG_SMP
 	xorl %ebx,%ebx				/* This is the boot CPU (BSP) */
 	jmp 3f
-
 /*
  * Non-boot CPU entry point; entered from trampoline.S
  * We can't lgdt here, because lgdt itself uses a data segment, but
  * we know the trampoline has already loaded the boot_gdt_table GDT
  * for us.
+ *
+ * If cpu hotplug is not supported then this code can go in init section
+ * which will be freed later
  */
+
+#ifdef CONFIG_HOTPLUG_CPU
+.section .text
+#else
+.section .init.text
+#endif
+
+#ifdef CONFIG_SMP
 ENTRY(startup_32_smp)
 	cld
 	movl $(__BOOT_DS),%eax
@@ -208,8 +218,8 @@ ENTRY(startup_32_smp)
 	xorl %ebx,%ebx
 	incl %ebx
 
-3:
 #endif /* CONFIG_SMP */
+3:
 
 /*
  * Enable paging
@@ -492,6 +502,7 @@ ignore_int:
 #endif
 	iret
 
+.section .text
 #ifdef CONFIG_PARAVIRT
 startup_paravirt:
 	cld
diff -puN arch/i386/kernel/vmlinux.lds.S~i386-reloc-kernel-move-startup_32-in-text-head arch/i386/kernel/vmlinux.lds.S
--- linux-2.6.19-rc1-reloc/arch/i386/kernel/vmlinux.lds.S~i386-reloc-kernel-move-startup_32-in-text-head	2006-12-15 14:09:01.000000000 +0530
+++ linux-2.6.19-rc1-reloc-root/arch/i386/kernel/vmlinux.lds.S	2006-12-15 14:09:01.000000000 +0530
@@ -37,9 +37,14 @@ SECTIONS
 {
   . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
   phys_startup_32 = startup_32 - LOAD_OFFSET;
+
+  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+  	_text = .;			/* Text and read-only data */
+	*(.text.head)
+  } :text = 0x9090
+
   /* read-only */
   .text : AT(ADDR(.text) - LOAD_OFFSET) {
-  	_text = .;			/* Text and read-only data */
 	*(.text)
 	SCHED_TEXT
 	LOCK_TEXT
diff -puN scripts/mod/modpost.c~i386-reloc-kernel-move-startup_32-in-text-head scripts/mod/modpost.c
--- linux-2.6.19-rc1-reloc/scripts/mod/modpost.c~i386-reloc-kernel-move-startup_32-in-text-head	2006-12-15 14:09:01.000000000 +0530
+++ linux-2.6.19-rc1-reloc-root/scripts/mod/modpost.c	2006-12-15 14:09:01.000000000 +0530
@@ -623,11 +623,19 @@ static int secref_whitelist(const char *
 	if (f1 && f2)
 		return 1;
 
-	/* Whitelist all references from .pci_fixup section if vmlinux */
+	/* Whitelist all references from .pci_fixup section if vmlinux
+	 * Whitelist all refereces from .text.head to .init.data if vmlinux
+	 * Whitelist all refereces from .text.head to .init.text if vmlinux
+	 */
 	if (is_vmlinux(modname)) {
 		if ((strcmp(fromsec, ".pci_fixup") == 0) &&
 		    (strcmp(tosec, ".init.text") == 0))
 		return 1;
+
+		if ((strcmp(fromsec, ".text.head") == 0) &&
+			((strcmp(tosec, ".init.data") == 0) ||
+			(strcmp(tosec, ".init.text") == 0)))
+		return 1;
 	}
 	return 0;
 }
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux