I went on with investigating that problem and found the problem,
though I'm not sure if that solution is acceptable..
seems like the memory range gets preallocated in setup-bus.c, and
CARDBUS_MEM_SIZE defines that size.
I changed
#define CARDBUS_MEM_SIZE (32*1024*1024)
to
#define CARDBUS_MEM_SIZE (48*1024*1024)
and now the system is able to allocate the resources for the 3rd
pci/pcmcia function.
Can anyone please have a closer look at it too? I think the whole
implementation isn't really good there..
so this is the new output of iomem:
$ cat /proc/iomem
...
30000000-35ffffff : PCI Bus #02
30000000-32ffffff : PCI CardBus #03
36000000-360003ff : 0000:00:1f.1
39000000-3bffffff : PCI CardBus #03
39000000-39ffffff : 0000:03:00.0
3a000000-3affffff : 0000:03:00.1
3b000000-3bffffff : 0000:03:00.2 <- this one failed to allocate previously
3c000000-3effffff : PCI CardBus #07
41000000-43ffffff : PCI CardBus #07
...
and lspci:
$ lspci -vvv
03:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 39000000 (32-bit, non-prefetchable)
[disabled] [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 3a000000 (32-bit, non-prefetchable)
[disabled] [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
NEW --> Region 0: Memory at 3b000000 (32-bit, non-prefetchable)
[disabled] [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
thanks,
Markus
On 12/12/06, Markus Rechberger <[email protected]> wrote:
Hi,
I've got a PCMCIA Hybrid TV tuner, but when I plug it in it fails to
allocate resources for the 3rd PCI function.
I already searched with google and someone implemented an otion
parm: override_bios:yenta ignore bios resource allocation (uint
in yenta_socket, though this doesn't seem to work out with that device.
Any idea how that problem can be solved?
So here are some logs
lspci:
0000:03:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI
Video and Audio Decoder (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 1788
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (5000ns min, 13750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 36000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder [Audio Port] (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 1788
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 37000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:03:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccdff : Video ROM
000cd000-000ce7ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1dedffff : System RAM
00100000-002ada17 : Kernel code
002ada18-0037ebc7 : Kernel data
1dee0000-1deebfff : ACPI Tables
1deec000-1defffff : ACPI Non-volatile Storage
1df00000-1fffffff : reserved
30000000-33ffffff : PCI Bus #02
30000000-31ffffff : PCI CardBus #03
32000000-33ffffff : PCI CardBus #07
34000000-340003ff : 0000:00:1f.1
36000000-37ffffff : PCI CardBus #03
36000000-36ffffff : 0000:03:00.0
36000000-36ffffff : cx88[0]
37000000-37ffffff : 0000:03:00.1
37000000-37ffffff : cx88[0]
38000000-39ffffff : PCI CardBus #07
e0000000-e007ffff : 0000:00:02.0
e0080000-e00fffff : 0000:00:02.1
e0100000-e01003ff : 0000:00:1d.7
e0100000-e01003ff : ehci_hcd
e0100800-e01008ff : 0000:00:1f.5
e0100800-e01008ff : Intel 82801DB-ICH4
e0100c00-e0100dff : 0000:00:1f.5
e0100c00-e0100dff : Intel 82801DB-ICH4
e0200000-e07fffff : PCI Bus #02
e0200000-e0203fff : 0000:02:07.0
e0204000-e0205fff : 0000:02:02.0
e0204000-e0205fff : b44
e0206000-e0206fff : 0000:02:04.0
e0206000-e0206fff : ipw2100
e0207000-e0207fff : 0000:02:06.0
e0207000-e0207fff : yenta_socket
e0208000-e0208fff : 0000:02:06.1
e0208000-e0208fff : yenta_socket
e0209000-e02097ff : 0000:02:07.0
e0209000-e02097ff : ohci1394
e0260000-e0260fff : pcmcia_socket1
e8000000-efffffff : 0000:00:02.0
f0000000-f7ffffff : 0000:00:02.1
fec10000-fec1ffff : reserved
ff800000-ffbfffff : reserved
fffffc00-ffffffff : reserved
dmesg:
Yenta: CardBus bridge found at 0000:02:06.0 [1025:0035]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x00b8, PCI irq 10
Socket status: 30000820
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
Yenta: CardBus bridge found at 0000:02:06.1 [1025:0035]
Yenta: ISA IRQ mask 0x00b8, PCI irq 10
Socket status: 30000410
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
pccard: CardBus card inserted into slot 0
PCI: Failed to allocate mem resource #0:1000000@38000000 for 0000:03:00.2
thanks,
Markus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]