Re: JMicron SATA, "softreset failed (1st FIS failed)" on every boot

Tobias Diedrich wrote:
> Hi,
> 
> I'm seeing the following strange behaviour with libata in the
> mm-series (currently 2.6.18-mm2):
> 
> [   31.324566] ata2: softreset failed (1st FIS failed)
> [   31.324674] ata2: softreset failed, retrying in 5 secs
> [   36.642196] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   36.645232] ata2.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 31/32)
> 
> This is with a JMicron controller in AHCI mode on an ASUS M2N-SLI
> Deluxe board.  It's a bit annoying, since this means an additional
> 5-second delay on every boot.

Do you see the same on 2.6.20-rc1?

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

---

• Prev by Date: Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4, SATA 300 TX4
• Next by Date: Re: GPL only modules [was Re: [GIT PATCH] more Driver core patches for 2.6.19]
• Previous by thread: Recent mm changes leading to filesystem corruption?
• Next by thread: pata_marvell and Marvell 88SE6121
• Index(es):
  • Date
  • Thread

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]