RE: 2.6.18.4: flush_workqueue calls mutex_lock in interrupt environment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2006-12-14 at 22:35 -0800, Chen, Kenneth W wrote:
> Chen, Kenneth wrote on Thursday, December 14, 2006 5:59 PM
> > > It seems utterly insane to have aio_complete() flush a workqueue. That
> > > function has to be called from a number of different environments,
> > > including non-sleep tolerant environments.
> > > 
> > > For instance it means that directIO on NFS will now cause the rpciod
> > > workqueues to call flush_workqueue(aio_wq), thus slowing down all RPC
> > > activity.
> > 
> > The bug appears to be somewhere else, somehow the ref count on ioctx is
> > all messed up.
> > 
> > In aio_complete, __put_ioctx() should not be invoked because ref count
> > on ioctx is supposedly more than 2, aio_complete decrement it once and
> > should return without invoking the free function.

This makes absolutely no sense whatsoever. If the refcount is 'always
supposedo to be more than 2' then why would you need a refcount at all
in aio_complete?

> > The real freeing ioctx should be coming from exit_aio() or io_destroy(),
> > in which case both wait until no further pending AIO request via
> > wait_for_all_aios().
> 
> Ah, I think I see the bug: it must be a race between io_destroy() and
> aio_complete().  A possible scenario:
> 
> cpu0                               cpu1
> io_destroy                         aio_complete
>   wait_for_all_aios {                __aio_put_req
>      ...                                 ctx->reqs_active--;
>      if (!ctx->reqs_active)
>         return;
>   }
>   ...
>   put_ioctx(ioctx)
> 
>                                      put_ioctx(ctx);
>                                         bam! Bug trigger!
> 
> AIO finished on cpu1 and while in the middle of aio_complete, cpu0 starts
> io_destroy sequence, sees no pending AIO, went ahead decrement the ref
> count on ioctx.  At a later point in aio_complete, the put_ioctx decrement
> last ref count and calls the ioctx freeing function and there it triggered
> the bug warning.
> 
> A simple fix would be to access ctx->reqs_active inside ctx spin lock in wait_for_all_aios().  At the mean time, I would like to
> remove ref counting
> for each iocb because we already performing ref count using reqs_active. This
> would also prevent similar buggy code in the future.
> 
> 
> Signed-off-by: Ken Chen <[email protected]>
> 
> --- ./fs/aio.c.orig	2006-11-29 13:57:37.000000000 -0800
> +++ ./fs/aio.c	2006-12-14 20:45:14.000000000 -0800
> @@ -298,17 +298,23 @@ static void wait_for_all_aios(struct kio
>  	struct task_struct *tsk = current;
>  	DECLARE_WAITQUEUE(wait, tsk);
>  
> +	spin_lock_irq(&ctx->ctx_lock);
>  	if (!ctx->reqs_active)
> -		return;
> +		goto out;
>  
>  	add_wait_queue(&ctx->wait, &wait);
>  	set_task_state(tsk, TASK_UNINTERRUPTIBLE);
>  	while (ctx->reqs_active) {
> +		spin_unlock_irq(&ctx->ctx_lock);
>  		schedule();
>  		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
> +		spin_lock_irq(&ctx->ctx_lock);
>  	}
>  	__set_task_state(tsk, TASK_RUNNING);
>  	remove_wait_queue(&ctx->wait, &wait);
> +
> +out:
> +	spin_unlock_irq(&ctx->ctx_lock);
>  }
>  
>  /* wait_on_sync_kiocb:
> @@ -425,7 +431,6 @@ static struct kiocb fastcall *__aio_get_
>  	ring = kmap_atomic(ctx->ring_info.ring_pages[0], KM_USER0);
>  	if (ctx->reqs_active < aio_ring_avail(&ctx->ring_info, ring)) {
>  		list_add(&req->ki_list, &ctx->active_reqs);
> -		get_ioctx(ctx);
>  		ctx->reqs_active++;
>  		okay = 1;
>  	}
> @@ -538,8 +543,6 @@ int fastcall aio_put_req(struct kiocb *r
>  	spin_lock_irq(&ctx->ctx_lock);
>  	ret = __aio_put_req(ctx, req);
>  	spin_unlock_irq(&ctx->ctx_lock);
> -	if (ret)
> -		put_ioctx(ctx);
>  	return ret;
>  }
>  
> @@ -795,8 +798,7 @@ static int __aio_run_iocbs(struct kioctx
>  		 */
>  		iocb->ki_users++;       /* grab extra reference */
>  		aio_run_iocb(iocb);
> -		if (__aio_put_req(ctx, iocb))  /* drop extra ref */
> -			put_ioctx(ctx);
> +		__aio_put_req(ctx, iocb);
>   	}
>  	if (!list_empty(&ctx->run_list))
>  		return 1;
> @@ -942,7 +944,6 @@ int fastcall aio_complete(struct kiocb *
>  	struct io_event	*event;
>  	unsigned long	flags;
>  	unsigned long	tail;
> -	int		ret;
>  
>  	/*
>  	 * Special case handling for sync iocbs:
> @@ -1011,18 +1012,12 @@ int fastcall aio_complete(struct kiocb *
>  	pr_debug("%ld retries: %zd of %zd\n", iocb->ki_retried,
>  		iocb->ki_nbytes - iocb->ki_left, iocb->ki_nbytes);
>  put_rq:
> -	/* everything turned out well, dispose of the aiocb. */
> -	ret = __aio_put_req(ctx, iocb);
> -
>  	spin_unlock_irqrestore(&ctx->ctx_lock, flags);
>  
>  	if (waitqueue_active(&ctx->wait))
>  		wake_up(&ctx->wait);
>  
> -	if (ret)
> -		put_ioctx(ctx);
> -
> -	return ret;
> +	return aio_put_req(iocb);
>  }

New race: You are now calling wake_up(&ctx->wait) before you've called
aio_put_req(). You also still have the exact same race as before since
aio_put_req() also calls put_ioctx() if ret != 0...

Trond

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux