Teles PCI not initializing with HiSax

[Stian Jordet <liste@jordet.net>]

Hi,

since at least 2.6.18, my ISDN card has given me this error in dmesg:

ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2
PPP BSD Compression module registered
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (kernel)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Teles/PCI driver Rev. 2.23.2.3
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 19
Found: Zoran, base-address: 0xdb800000, irq: 0x13
HiSax: Teles PCI config irq:19 mem:e084e000
TelesPCI: ISAC version (0): 2086/2186 V1.1
TelesPCI: HSCX version A: V2.1  B: V2.1
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ(19) getting no interrupts during init 1
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ(19) getting no interrupts during init 2
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ(19) getting no interrupts during init 3
HiSax: Card Teles PCI not installed !

I also get this error when I boot with "acpi=off noapic", so I'm pretty
sure it's a hisax bug, not an acpi/irq error.

Anyone have an idea what's the problem here?

Please cc me, as I'm not subscribed.

Thanks.

Best regards,
Stian

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/