Re: [PATCH v2] libata: Simulate REPORT LUNS for ATAPI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2006-12-11 at 11:24 -0500, Jeff Garzik wrote:
> Darrick J. Wong wrote:
> > The Quantum GoVault SATAPI removable disk device returns ATA_ERR in
> > response to a REPORT LUNS packet.  If this happens to an ATAPI device
> > that is attached to a SAS controller (this is the case with sas_ata),
> > the device does not load because SCSI won't touch a "SCSI device"
> > that won't report its LUNs.  Since most ATAPI devices don't support
> > multiple LUNs anyway, we might as well fake a response like we do for
> > ATA devices.
> > 
> > Signed-off-by: Darrick J. Wong <[email protected]>
> 
> I'm leaning towards applying this, perhaps with a module option that 
> allows experimenters to revert back to the older behavior.
> 
> Any chance you could be talked into tackling some of the SAT 
> translation-related items Doug G mentioned?  I'm almost certain there 
> are some info pages we should be returning, but are not, at the very least.

I thought we were closing in on agreeing that the SPC/MMC
inconsistencies made this the correct candidate fix.

James

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index ce63044..9d5e75b 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -7,6 +7,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
+#include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_devinfo.h>
 
@@ -439,6 +440,11 @@ int scsi_get_device_flags(struct scsi_de
 				return devinfo->flags;
 		}
 	}
+	/* MMC devices can return SCSI-3 compliance and yet still not
+	 * support REPORT LUNS, so make them act as BLIST_NOREPORTLUN
+	 * unless BLIST_REPORTLUN2 is specifically set */
+	if (sdev->type == TYPE_ROM && (bflags & BLIST_REPORTLUN2) == 0)
+		bflags |= BLIST_NOREPORTLUN;
 	return bflags;
 }
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux