From: Kars de Jong <[email protected]>
- 7990: request_irq() should have SA_SHIRQ flag set
- hplance_init() printed dev->name before register_netdev() had filled it in
Signed-off-by: Kars de Jong <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
drivers/net/7990.c | 2 +-
drivers/net/hplance.c | 14 ++++++++++----
2 files changed, 11 insertions(+), 5 deletions(-)
--- linux-m68k-2.6.19.orig/drivers/net/7990.c
+++ linux-m68k-2.6.19/drivers/net/7990.c
@@ -500,7 +500,7 @@ int lance_open (struct net_device *dev)
int res;
/* Install the Interrupt handler. Or we could shunt this out to specific drivers? */
- if (request_irq(lp->irq, lance_interrupt, 0, lp->name, dev))
+ if (request_irq(lp->irq, lance_interrupt, SA_SHIRQ, lp->name, dev))
return -EAGAIN;
res = lance_reset(dev);
--- linux-m68k-2.6.19.orig/drivers/net/hplance.c
+++ linux-m68k-2.6.19/drivers/net/hplance.c
@@ -77,6 +77,7 @@ static int __devinit hplance_init_one(st
{
struct net_device *dev;
int err = -ENOMEM;
+ int i;
dev = alloc_etherdev(sizeof(struct hplance_private));
if (!dev)
@@ -93,6 +94,15 @@ static int __devinit hplance_init_one(st
goto out_release_mem_region;
dio_set_drvdata(d, dev);
+
+ printk(KERN_INFO "%s: %s; select code %d, addr %2.2x", dev->name, d->name, d->scode, dev->dev_addr[0]);
+
+ for (i=1; i<6; i++) {
+ printk(":%2.2x", dev->dev_addr[i]);
+ }
+
+ printk(", irq %d\n", d->ipl);
+
return 0;
out_release_mem_region:
@@ -119,8 +129,6 @@ static void __init hplance_init(struct n
struct hplance_private *lp;
int i;
- printk(KERN_INFO "%s: %s; select code %d, addr", dev->name, d->name, d->scode);
-
/* reset the board */
out_8(va+DIO_IDOFF, 0xff);
udelay(100); /* ariba! ariba! udelay! udelay! */
@@ -143,7 +151,6 @@ static void __init hplance_init(struct n
*/
dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
| (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
- printk("%c%2.2x", i == 0 ? ' ' : ':', dev->dev_addr[i]);
}
lp = netdev_priv(dev);
@@ -160,7 +167,6 @@ static void __init hplance_init(struct n
lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
- printk(", irq %d\n", lp->lance.irq);
}
/* This is disgusting. We have to check the DIO status register for ack every
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]