Re: [PATCH v2] libata: Simulate REPORT LUNS for ATAPI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jeff Garzik wrote:
> Darrick J. Wong wrote:
>> The Quantum GoVault SATAPI removable disk device returns ATA_ERR in
>> response to a REPORT LUNS packet.  If this happens to an ATAPI device
>> that is attached to a SAS controller (this is the case with sas_ata),
>> the device does not load because SCSI won't touch a "SCSI device"
>> that won't report its LUNs.  Since most ATAPI devices don't support
>> multiple LUNs anyway, we might as well fake a response like we do for
>> ATA devices.
>>
>> Signed-off-by: Darrick J. Wong <[email protected]>
> 
> Seems sane to me, but I would like additional comment/testing/etc.
> before applying...

A SCSI target contains zero or more logical units. As
in this case, those logical units may use a different
transport. In such cases a SCSI target needs to emulate responses
to some SCSI commands (and modify the responses to others).
Here is a list that is probably not comprehensive:
  - INQUIRY  (peripheral qualifier in standard response)
  - INQUIRY, device identification VPD page (0x83)
       - obviously for the device name+identifier and port
         name+identifier
       - may need to concatenate those with the lu's
         name+identifier
  - INQUIRY, SCSI ports VPD page
  - INQUIRY, ATA Information VPD page (for SAT)
  - REPORT LUNS [mandatory in SPC-3 hence mandatory in SAT]
  - protocol specific port mode page (0x19)
  - protocol specific lu mode page (0x18) [could simulate]
  - PATA control mode page (0xa,0xf1) (for SAT)
  - protocol specific port _log_ page (0x18)

And for SAT you could add the ATA PASS-THROUGH
commands to that list. Those that are really ambitious
could implement well know logical units (wluns) which are
essentially a clean way to talk directly to the target
rather than a logical unit.


About the multi-lun ATAPI devices comment: how would libata
represent multiple S-ATAPI devices connected to a SATA
port multiplier?

Doug Gilbert


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux