From: Vladimir Ananiev <[email protected]>
Convert 1501->15xx in generic omap code, so that sx1 can work.
Signed-off-by: Pavel Machek <[email protected]>
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index b84ba95..7e3b24f 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -691,7 +691,7 @@ #endif
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
- if (!cpu_is_omap1510())
+ if (!cpu_is_omap15xx())
crystal_type = info->system_clock_type;
}
diff --git a/arch/arm/plat-omap/dsp/dsp_common.c b/arch/arm/plat-omap/dsp/dsp_common.c
index 44fa86a..0a6059e 100644
--- a/arch/arm/plat-omap/dsp/dsp_common.c
+++ b/arch/arm/plat-omap/dsp/dsp_common.c
@@ -273,7 +273,7 @@ static int __init omap_dsp_init(void)
dspmem_size = 0;
#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
dspmem_base = OMAP1510_DSP_BASE;
dspmem_size = OMAP1510_DSP_SIZE;
daram_base = OMAP1510_DARAM_BASE;
index 7e91779..4e5f9b7 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -127,7 +127,7 @@ #endif
}
/* Check for pull up or pull down selection on 1610 */
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
if (cfg->pu_pd_reg && cfg->pull_val) {
spin_lock_irqsave(&mux_spin_lock, flags);
pu_pd_orig = omap_readl(cfg->pu_pd_reg);
@@ -183,7 +183,7 @@ #ifdef CONFIG_OMAP_MUX_DEBUG
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
if (cfg->pu_pd_reg && cfg->pull_val) {
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->pu_pd_name, cfg->pu_pd_reg,
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index a350f5f..14cba97 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -70,7 +70,7 @@ #define OMAP1510_LB_OFFSET UL(0x30000000
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev) (cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
(dma_addr_t)virt_to_lbus(page_address(page)) : \
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
