Kristian Høgsberg wrote:
Add the OHCI driver to the stack and build system.
Signed-off-by: Kristian Høgsberg <[email protected]>
---
drivers/fw/fw-ohci.c | 1334 ++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/fw/fw-ohci.h | 152 ++++++
2 files changed, 1486 insertions(+), 0 deletions(-)
diff --git a/drivers/fw/fw-ohci.c b/drivers/fw/fw-ohci.c
new file mode 100644
index 0000000..78e0324
--- /dev/null
+++ b/drivers/fw/fw-ohci.c
@@ -0,0 +1,1334 @@
+/* -*- c-basic-offset: 8 -*-
+ *
+ * fw-ohci.c - Driver for OHCI 1394 boards
+ * Copyright (C) 2003 Kristian Høgsberg <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+
+#include "fw-transaction.h"
+#include "fw-ohci.h"
+
+struct descriptor {
+ u32 req_count:16;
+
+ u32 wait:2;
+ u32 branch:2;
+ u32 irq:2;
+ u32 yy:1;
+ u32 ping:1;
+
+ u32 key:3;
+ u32 status:1;
+ u32 command:4;
+
+ u32 data_address;
+ u32 branch_address;
+
+ u32 res_count:16;
+ u32 transfer_status:16;
+} __attribute__ ((aligned(16)));
you probably want __le32 annotations for sparse, right?
+#define DESCRIPTOR_OUTPUT_MORE 0
+#define DESCRIPTOR_OUTPUT_LAST 1
+#define DESCRIPTOR_INPUT_MORE 2
+#define DESCRIPTOR_INPUT_LAST 3
+#define DESCRIPTOR_NO_IRQ 0
+#define DESCRIPTOR_IRQ_ERROR 1
+#define DESCRIPTOR_IRQ_ALWAYS 3
+#define DESCRIPTOR_KEY_IMMEDIATE 2
+#define DESCRIPTOR_BRANCH_ALWAYS 3
+
+struct ar_context {
+ struct fw_ohci *ohci;
+ struct descriptor descriptor;
+ u32 buffer[512];
+ dma_addr_t descriptor_bus;
+ dma_addr_t buffer_bus;
+
+ u32 command_ptr;
+ u32 control_set;
+ u32 control_clear;
+
+ struct tasklet_struct tasklet;
+};
+
+struct at_context {
+ struct fw_ohci *ohci;
+ dma_addr_t descriptor_bus;
+ dma_addr_t buffer_bus;
+
+ struct list_head list;
+
+ struct {
+ struct descriptor more;
+ u32 header[4];
+ struct descriptor last;
+ } descriptor;
+
+ u32 command_ptr;
+ u32 control_set;
+ u32 control_clear;
+
+ struct tasklet_struct tasklet;
+};
+
+struct it_header {
+ u32 sy:4;
+ u32 tcode:4;
+ u32 channel:6;
+ u32 tag:2;
+ u32 speed:3;
+ u32 reserved0:13;
+ u32 reserved1:16;
+ u32 data_length:16;
+};
ditto.
And for the last two fields, I bet that using the normal 'u16' type
(__le16?) would generate much better code than a bitfield:16 ever would.
+struct iso_context {
+ struct fw_iso_context base;
+ struct tasklet_struct tasklet;
+ u32 control_set;
+ u32 control_clear;
+ u32 command_ptr;
+ u32 context_match;
+
+ struct descriptor *buffer;
+ dma_addr_t buffer_bus;
+ struct descriptor *head_descriptor;
+ struct descriptor *tail_descriptor;
+ struct descriptor *tail_descriptor_last;
+ struct descriptor *prev_descriptor;
+};
+
+#define CONFIG_ROM_SIZE 1024
+
+struct fw_ohci {
+ struct fw_card card;
+
+ struct pci_dev *dev;
struct device* instead? grep for to_pci_dev() to see how to get pci-dev
from device.
+ char *registers;
should be 'void __iomem *'
See Documentation/sparse.txt for more info on checking your code with
sparse.
+ dma_addr_t self_id_bus;
+ u32 *self_id_cpu;
+ struct tasklet_struct bus_reset_tasklet;
+ int generation;
+ int request_generation;
+
+ spinlock_t lock;
+ u32 self_id_buffer[512];
+
+ /* Config rom buffers */
+ u32 *config_rom;
+ dma_addr_t config_rom_bus;
+ u32 *next_config_rom;
+ dma_addr_t next_config_rom_bus;
+
+ struct ar_context ar_request_ctx;
+ struct ar_context ar_response_ctx;
+ struct at_context at_request_ctx;
+ struct at_context at_response_ctx;
+
+ u32 it_context_mask;
+ struct iso_context *it_context_list;
+ u32 ir_context_mask;
+ struct iso_context *ir_context_list;
+};
+
+extern inline struct fw_ohci *fw_ohci(struct fw_card *card)
+{
+ return container_of(card, struct fw_ohci, card);
+}
+
+#define CONTEXT_CYCLE_MATCH_ENABLE 0x80000000
+
+#define CONTEXT_RUN 0x8000
+#define CONTEXT_WAKE 0x1000
+#define CONTEXT_DEAD 0x0800
+#define CONTEXT_ACTIVE 0x0400
+
+#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
+#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
+
+#define FW_OHCI_MAJOR 240
+#define OHCI1394_REGISTER_SIZE 0x800
+#define OHCI_LOOP_COUNT 500
+#define OHCI1394_PCI_HCI_Control 0x40
+#define SELF_ID_BUF_SIZE 0x800
consider using
enum {
constant1 = 1234,
constant2 = 5678,
};
for constants. These actually have some type information attached by
the compiler, and they show up as symbols in the debugger since they are
not stripped out by the C pre-processor.
+#define PCI_CLASS_FIREWIRE_OHCI ((PCI_CLASS_SERIAL_FIREWIRE << 8) | 0x10)
+
+static char ohci_driver_name[] = KBUILD_MODNAME;
+
+extern inline void reg_write(const struct fw_ohci *ohci, int offset, u32 data)
+{
+ writel(data, ohci->registers + offset);
+}
+
+extern inline u32 reg_read(const struct fw_ohci *ohci, int offset)
+{
+ return readl(ohci->registers + offset);
+}
+
+static int read_phy_reg(struct fw_ohci *ohci, u8 addr)
+{
+ u32 val;
+
+ reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
+ msleep(2);
+ val = reg_read(ohci, OHCI1394_PhyControl);
+ if ((val & OHCI1394_PhyControl_ReadDone) == 0)
+ return -EBUSY;
+
+ return OHCI1394_PhyControl_ReadData(val);
+}
+
+static void write_phy_reg(struct fw_ohci *ohci, u8 addr, u8 data)
+{
+ reg_write(ohci, OHCI1394_PhyControl,
+ OHCI1394_PhyControl_Write(addr, data));
+}
+
+static int
+ohci_update_phy_reg(struct fw_card *card, int addr,
+ int clear_bits, int set_bits)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ int old;
+
+ old = read_phy_reg(ohci, addr);
+ if (old < 0) {
+ fw_error("failed to set phy reg bits.\n");
+ return old;
+ }
+ old = (old & ~clear_bits) | set_bits;
+ write_phy_reg(ohci, addr, old);
+
+ return 0;
+}
+
+static void ar_context_run(struct ar_context *ctx)
+{
+ reg_write(ctx->ohci, ctx->command_ptr, ctx->descriptor_bus | 1);
+ reg_write(ctx->ohci, ctx->control_set, CONTEXT_RUN);
PCI posting?
+static void ar_context_tasklet(unsigned long data)
+{
+ struct ar_context *ctx = (struct ar_context *)data;
+ struct fw_ohci *ohci = ctx->ohci;
+ u32 status;
+ int length, speed, ack, timestamp;
+
+ /* FIXME: What to do about evt_* errors? */
+ length = ctx->descriptor.req_count - ctx->descriptor.res_count - 4;
+ status = ctx->buffer[length / 4];
+ ack = ((status >> 16) & 0x1f) - 16;
+ speed = (status >> 21) & 0x7;
+ timestamp = status & 0xffff;
+
+ /* The OHCI bus reset handler synthesizes a phy packet with
+ * the new generation number when a bus reset happens (see
+ * section 8.4.2.3). This helps us determine when a request
+ * was received and make sure we send the response in the same
+ * generation. We only need this for requests; for responses
+ * we use the unique tlabel for finding the matching
+ * request. */
+ if (ack + 16 == 0x09)
+ ohci->request_generation = (ctx->buffer[2] >> 16) & 0xff;
+ else if (ctx == &ohci->ar_request_ctx)
+ fw_core_handle_request(&ohci->card, speed, ack, timestamp,
+ ohci->request_generation,
+ length, ctx->buffer);
+ else
+ fw_core_handle_response(&ohci->card, speed, ack, timestamp,
+ length, ctx->buffer);
+
+ ctx->descriptor.data_address = ctx->buffer_bus;
+ ctx->descriptor.req_count = sizeof ctx->buffer;
+ ctx->descriptor.res_count = ctx->descriptor.req_count;
+
+ dma_sync_single_for_device(&ohci->dev->dev, ctx->descriptor_bus,
+ sizeof ctx->descriptor_bus, DMA_TO_DEVICE);
+
+ /* FIXME: We stop and restart the ar context here, what if we
+ * stop while a receive is in progress? Maybe we could just
+ * loop the context back to itself and use it in buffer fill
+ * mode as intended... */
+
+ reg_write(ctx->ohci, ctx->control_clear, CONTEXT_RUN);
+ ar_context_run(ctx);
+}
+
+static int
+ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 control_set)
+{
+ /* FIXME: cpu_to_le32. */
+
+ ctx->descriptor_bus =
+ dma_map_single(&ohci->dev->dev, &ctx->descriptor,
+ sizeof ctx->descriptor, PCI_DMA_TODEVICE);
+ if (ctx->descriptor_bus == 0)
+ return -ENOMEM;
+
+ if (ctx->descriptor_bus & 0xf)
+ fw_notify("descriptor not 16-byte aligned: 0x%08x\n",
+ ctx->descriptor_bus);
+
+ ctx->buffer_bus =
+ dma_map_single(&ohci->dev->dev, ctx->buffer,
+ sizeof ctx->buffer, PCI_DMA_FROMDEVICE);
+
+ if (ctx->buffer_bus == 0)
+ return -ENOMEM;
leak on error
+ memset(&ctx->descriptor, 0, sizeof ctx->descriptor);
+ ctx->descriptor.command = DESCRIPTOR_INPUT_MORE;
+ ctx->descriptor.status = 1;
+ ctx->descriptor.irq = DESCRIPTOR_NO_IRQ;
+ ctx->descriptor.branch = DESCRIPTOR_BRANCH_ALWAYS;
+ ctx->descriptor.req_count = sizeof ctx->buffer;
+ ctx->descriptor.data_address = ctx->buffer_bus;
+ ctx->descriptor.res_count = ctx->descriptor.req_count;
+
+ ctx->control_set = control_set;
+ ctx->control_clear = control_set + 4;
+ ctx->command_ptr = control_set + 12;
+ ctx->ohci = ohci;
+
+ tasklet_init(&ctx->tasklet, ar_context_tasklet, (unsigned long)ctx);
+
+ ar_context_run(ctx);
+
+ return 0;
+}
+
+ ohci->next_config_rom = NULL;
+ }
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ fw_core_handle_bus_reset(&ohci->card, node_id, generation,
+ self_id_count, ohci->self_id_buffer);
+}
+
+static irqreturn_t irq_handler(int irq, void *data, struct pt_regs *unused)
+{
+ struct fw_ohci *ohci = data;
+ u32 event, iso_event;
+ int i;
+
+ event = reg_read(ohci, OHCI1394_IntEventClear);
+
+ if (!event)
+ return IRQ_NONE;
check for 0xffffffff also
+ reg_write(ohci, OHCI1394_IntEventClear, event);
+
+ if (event & OHCI1394_selfIDComplete)
+ tasklet_schedule(&ohci->bus_reset_tasklet);
+
+ if (event & OHCI1394_RQPkt)
+ tasklet_schedule(&ohci->ar_request_ctx.tasklet);
+
+ if (event & OHCI1394_RSPkt)
+ tasklet_schedule(&ohci->ar_response_ctx.tasklet);
+
+ if (event & OHCI1394_reqTxComplete)
+ tasklet_schedule(&ohci->at_request_ctx.tasklet);
+
+ if (event & OHCI1394_respTxComplete)
+ tasklet_schedule(&ohci->at_response_ctx.tasklet);
+
+ iso_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet);
+ reg_write(ohci, OHCI1394_IsoRecvIntEventClear, iso_event);
+
+ while (iso_event) {
+ i = ffs(iso_event) - 1;
+ tasklet_schedule(&ohci->ir_context_list[i].tasklet);
+ iso_event &= ~(1 << i);
+ }
+
+ iso_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet);
+ reg_write(ohci, OHCI1394_IsoXmitIntEventClear, iso_event);
+
+ while (iso_event) {
+ i = ffs(iso_event) - 1;
+ tasklet_schedule(&ohci->it_context_list[i].tasklet);
+ iso_event &= ~(1 << i);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ohci_enable(struct fw_card *card, u32 * config_rom, size_t length)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ /* When the link is not yet enabled, the atomic config rom
+ * described above is not active. We have to update
+ * ConfigRomHeader and BusOptions manually, and the write to
+ * ConfigROMmap takes effect immediately. We tie this to the
+ * enabling of the link, so we ensure that we have a valid
+ * config rom before enabling - the OHCI requires that
+ * ConfigROMhdr and BusOptions have valid values before
+ * enabling.
+ */
+
+ ohci->config_rom = pci_alloc_consistent(ohci->dev, CONFIG_ROM_SIZE,
+ &ohci->config_rom_bus);
+ if (ohci->config_rom == NULL)
+ return -ENOMEM;
+
+ memset(ohci->config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->config_rom, config_rom, length * 4);
+
+ reg_write(ohci, OHCI1394_ConfigROMmap, ohci->config_rom_bus);
+ reg_write(ohci, OHCI1394_ConfigROMhdr, config_rom[0]);
+ reg_write(ohci, OHCI1394_BusOptions, config_rom[2]);
+
+ reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
+
+ if (request_irq(ohci->dev->irq, irq_handler,
+ SA_SHIRQ, ohci_driver_name, ohci)) {
+ fw_error("Failed to allocate shared interrupt %d.\n",
+ ohci->dev->irq);
+ return -EIO;
leak on error
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_linkEnable |
+ OHCI1394_HCControl_BIBimageValid);
PCI posting
+ /* We are ready to go, initiate bus reset to finish the
+ * initialization. */
+
+ fw_core_initiate_bus_reset(&ohci->card, 1);
+
+ return 0;
+}
+
+static int
+ohci_set_config_rom(struct fw_card *card, u32 * config_rom, size_t length)
+{
+ struct fw_ohci *ohci;
+ unsigned long flags;
+ int retval = 0;
+
+ ohci = fw_ohci(card);
+
+ /* When the OHCI controller is enabled, the config rom update
+ * mechanism is a bit tricky, but easy enough to use. See
+ * section 5.5.6 in the OHCI specification.
+ *
+ * The OHCI controller caches the new config rom address in a
+ * shadow register (ConfigROMmapNext) and needs a bus reset
+ * for the changes to take place. When the bus reset is
+ * detected, the controller loads the new values for the
+ * ConfigRomHeader and BusOptions registers from the specified
+ * config rom and loads ConfigROMmap from the ConfigROMmapNext
+ * shadow register. All automatically and atomically.
+ *
+ * We use ohci->lock to avoid racing with the code that sets
+ * ohci->next_config_rom to NULL (see bus_reset_tasklet).
+ */
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ohci->next_config_rom == NULL) {
+ ohci->next_config_rom =
+ pci_alloc_consistent(ohci->dev, CONFIG_ROM_SIZE,
+ &ohci->next_config_rom_bus);
+
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
next_config_rom could be NULL. you have got to check allocations inside
spinlocks (GFP_ATOMIC), they are more likely to fail than GFP_KERNEL.
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom,
+ length * 4);
+ reg_write(ohci, OHCI1394_ConfigROMmap,
+ ohci->next_config_rom_bus);
+
+ /* Now initiate a bus reset to have the changes take
+ * effect. We clean up the old config rom memory and
+ * DMA mappings in the bus reset tasklet, since the
+ * OHCI controller could need to access it before the
+ * bus reset takes effect.
+ */
+
+ fw_core_initiate_bus_reset(&ohci->card, 1);
+ } else
+ retval = -EBUSY;
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ return retval;
+}
+
+static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ at_context_transmit(&ohci->at_request_ctx, packet);
+}
+
+static void ohci_send_response(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ at_context_transmit(&ohci->at_response_ctx, packet);
+}
+
+static int
+ohci_enable_phys_dma(struct fw_card *card, int node_id, int generation)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ unsigned long flags;
+ int retval = 0;
+
+ /* FIXME: make sure this bitmask is cleared when we clear the
+ * busReset interrupt bit. */
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ohci->generation != generation) {
+ retval = -ESTALE;
+ goto out;
+ }
+
+ if (node_id < 32) {
+ reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 1 << node_id);
+ } else {
+ reg_write(ohci, OHCI1394_PhyReqFilterHiSet,
+ 1 << (node_id - 32));
+ }
PCI posting
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ out:
+ return retval;
+}
+
+static void ir_context_tasklet(unsigned long data)
+{
+ struct iso_context *ctx = (struct iso_context *)data;
+
+ (void)ctx;
+}
+
+#define ISO_BUFFER_SIZE (64 * 1024)
+
+static void flush_iso_context(struct iso_context *ctx)
+{
+ struct fw_ohci *ohci = fw_ohci(ctx->base.card);
+ struct descriptor *d, *last;
+ int z;
+
+ dma_sync_single_for_cpu(ohci->card.device, ctx->buffer_bus,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
+
+ d = ctx->tail_descriptor;
+ last = ctx->tail_descriptor_last;
+
+ while (last->branch_address != 0 && last->transfer_status != 0) {
+ z = last->branch_address & 0xf;
+ d = ctx->buffer + (last->branch_address -
+ ctx->buffer_bus) / sizeof *d;
+
+ if (z == 2)
+ last = d;
+ else
+ last = d + z - 1;
+
+ if (last->irq)
+ ctx->base.callback(&ctx->base,
+ 0, last->res_count,
+ ctx->base.callback_data);
+ }
+
+ ctx->tail_descriptor = d;
+ ctx->tail_descriptor_last = last;
+}
+
+static void it_context_tasklet(unsigned long data)
+{
+ struct iso_context *ctx = (struct iso_context *)data;
+
+ flush_iso_context(ctx);
+}
+
+static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card,
+ int type)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ struct iso_context *ctx, *list;
+ void (*tasklet) (unsigned long data);
+ u32 *mask;
+ unsigned long flags;
+ int index;
+
+ if (type == FW_ISO_CONTEXT_TRANSMIT) {
+ mask = &ohci->it_context_mask;
+ list = ohci->it_context_list;
+ tasklet = it_context_tasklet;
+ } else {
+ mask = &ohci->ir_context_mask;
+ list = ohci->ir_context_list;
+ tasklet = ir_context_tasklet;
+ }
+
+ spin_lock_irqsave(&ohci->lock, flags);
+ index = ffs(*mask) - 1;
+ if (index >= 0)
+ *mask &= ~(1 << index);
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ if (index < 0)
+ return ERR_PTR(-EBUSY);
+
+ ctx = &list[index];
+ memset(ctx, 0, sizeof *ctx);
+ tasklet_init(&ctx->tasklet, tasklet, (unsigned long)ctx);
+
+ ctx->buffer = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
+ if (ctx->buffer == NULL) {
+ spin_lock_irqsave(&ohci->lock, flags);
+ *mask |= 1 << index;
+ spin_unlock_irqrestore(&ohci->lock, flags);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ ctx->buffer_bus =
+ dma_map_single(card->device, ctx->buffer,
+ ISO_BUFFER_SIZE, PCI_DMA_TODEVICE);
+
+ ctx->head_descriptor = ctx->buffer;
+ ctx->prev_descriptor = ctx->buffer;
+ ctx->tail_descriptor = ctx->buffer;
+ ctx->tail_descriptor_last = ctx->buffer;
+
+ /* We put a dummy descriptor in the buffer that has a NULL
+ * branch address and looks like it's been sent. That way we
+ * have a descriptor to append DMA programs to. Also, the
+ * ring buffer invariant is that it always has at least one
+ * element so that head == tail means buffer full. */
+
+ memset(ctx->head_descriptor, 0, sizeof *ctx->head_descriptor);
+ ctx->head_descriptor->command = DESCRIPTOR_OUTPUT_LAST;
+ ctx->head_descriptor->transfer_status = 0x8011;
+ ctx->head_descriptor++;
+
+ return &ctx->base;
+}
+
+static int ohci_send_iso(struct fw_iso_context *base, s32 cycle)
+{
+ struct iso_context *ctx = (struct iso_context *)base;
+ struct fw_ohci *ohci = fw_ohci(ctx->base.card);
+ u32 cycle_match = 0;
+ int index;
+
+ index = ctx - ohci->it_context_list;
+ if (cycle > 0)
+ cycle_match = CONTEXT_CYCLE_MATCH_ENABLE |
+ (cycle & 0x7fff) << 16;
+
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index);
+ reg_write(ohci, OHCI1394_IsoXmitCommandPtr(index),
+ ctx->tail_descriptor_last->branch_address);
+ reg_write(ohci, OHCI1394_IsoXmitContextControlClear(index), ~0);
+ reg_write(ohci, OHCI1394_IsoXmitContextControlSet(index),
+ CONTEXT_RUN | cycle_match);
PCI posting?
+static void ohci_free_iso_context(struct fw_iso_context *base)
+{
+ struct fw_ohci *ohci = fw_ohci(base->card);
+ struct iso_context *ctx = (struct iso_context *)base;
+ unsigned long flags;
+ int index;
+
+ flush_iso_context(ctx);
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+ index = ctx - ohci->it_context_list;
+ reg_write(ohci, OHCI1394_IsoXmitContextControlClear(index), ~0);
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index);
+ ohci->it_context_mask |= 1 << index;
+ } else {
+ index = ctx - ohci->ir_context_list;
+ reg_write(ohci, OHCI1394_IsoRcvContextControlClear(index), ~0);
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index);
+ ohci->ir_context_mask |= 1 << index;
+ }
+
+ dma_unmap_single(ohci->card.device, ctx->buffer_bus,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
PCI posting?
+ spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
+static int
+ohci_queue_iso(struct fw_iso_context *base,
+ struct fw_iso_packet *packet, void *payload)
+{
+ struct iso_context *ctx = (struct iso_context *)base;
+ struct fw_ohci *ohci = fw_ohci(ctx->base.card);
+ struct descriptor *d, *end, *last, *tail, *pd;
+ struct fw_iso_packet *p;
+ struct it_header *header;
+ dma_addr_t d_bus;
+ u32 z, header_z, payload_z;
+ u32 payload_index, payload_end_index, next_page_index;
+ int index, page, end_page, i, length, offset;
+
+ /* FIXME: Cycle lost behavior should be configurable: lose
+ * packet, retransmit or terminate.. */
+
+ p = packet;
+ payload_index = payload - ctx->base.buffer;
+ d = ctx->head_descriptor;
+ tail = ctx->tail_descriptor;
+ end = ctx->buffer + ISO_BUFFER_SIZE / sizeof(struct descriptor);
+
+ if (p->skip)
+ z = 1;
+ else
+ z = 2;
+ if (p->header_length > 0)
+ z++;
+
+ /* Determine the first page the payload isn't contained in. */
+ end_page = PAGE_ALIGN(payload_index + p->payload_length) >> PAGE_SHIFT;
+ if (p->payload_length > 0)
+ payload_z = end_page - (payload_index >> PAGE_SHIFT);
+ else
+ payload_z = 0;
+
+ z += payload_z;
+
+ /* Get header size in number of descriptors. */
+ header_z = DIV_ROUND_UP(p->header_length, sizeof *d);
+
+ if (d + z + header_z <= tail) {
+ goto has_space;
+ } else if (d > tail && d + z + header_z <= end) {
+ goto has_space;
+ } else if (d > tail && ctx->buffer + z + header_z <= tail) {
+ d = ctx->buffer;
+ goto has_space;
+ }
+
+ /* No space in buffer */
+ return -1;
+
+ has_space:
+ memset(d, 0, (z + header_z) * sizeof *d);
+ d_bus = ctx->buffer_bus + (d - ctx->buffer) * sizeof *d;
+
+ if (p->skip) {
+ d[0].key = 0;
+ d[0].req_count = 0;
+ } else {
+ d[0].key = DESCRIPTOR_KEY_IMMEDIATE;
+ d[0].req_count = 8;
+
+ header = (struct it_header *)&d[1];
+ header->sy = p->sy;
+ header->tag = p->tag;
+ header->tcode = TCODE_STREAM_DATA;
+ header->channel = ctx->base.channel;
+ header->speed = ctx->base.speed;
+ header->data_length = p->header_length + p->payload_length;
+ }
+
+ if (p->header_length > 0) {
+ d[2].req_count = p->header_length;
+ d[2].data_address = d_bus + z * sizeof *d;
+ memcpy(&d[z], p->header, p->header_length);
+ }
+
+ pd = d + z - payload_z;
+ payload_end_index = payload_index + p->payload_length;
+ for (i = 0; i < payload_z; i++) {
+ page = payload_index >> PAGE_SHIFT;
+ offset = payload_index & ~PAGE_MASK;
+ next_page_index = (page + 1) << PAGE_SHIFT;
+ length =
+ min(next_page_index, payload_end_index) - payload_index;
+ pd[i].req_count = length;
+ pd[i].data_address = ctx->base.pages[page] + offset;
+
+ payload_index += length;
+ }
+
+ if (z == 2)
+ last = d;
+ else
+ last = d + z - 1;
+
+ last->command = DESCRIPTOR_OUTPUT_LAST;
+ last->status = 1;
+ last->branch = DESCRIPTOR_BRANCH_ALWAYS;
+ if (p->interrupt)
+ last->irq = DESCRIPTOR_IRQ_ALWAYS;
+ else
+ last->irq = DESCRIPTOR_NO_IRQ;
+
+ dma_sync_single_for_device(ohci->card.device, ctx->buffer_bus,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
+
+ ctx->head_descriptor = d + z + header_z;
+ ctx->prev_descriptor->branch_address = d_bus | z;
+ ctx->prev_descriptor = last;
+
+ index = ctx - ohci->it_context_list;
+ reg_write(ohci, OHCI1394_IsoXmitContextControlSet(index), CONTEXT_WAKE);
PCI posting?
+static struct fw_card_driver ohci_driver = {
+ .name = ohci_driver_name,
+ .enable = ohci_enable,
+ .update_phy_reg = ohci_update_phy_reg,
+ .set_config_rom = ohci_set_config_rom,
+ .send_request = ohci_send_request,
+ .send_response = ohci_send_response,
+ .enable_phys_dma = ohci_enable_phys_dma,
+
+ .allocate_iso_context = ohci_allocate_iso_context,
+ .free_iso_context = ohci_free_iso_context,
+ .queue_iso = ohci_queue_iso,
+ .send_iso = ohci_send_iso
+};
+
+static int software_reset(struct fw_ohci *ohci)
+{
+ int i;
+
+ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
+
+ for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+ if ((reg_read(ohci, OHCI1394_HCControlSet) &
+ OHCI1394_HCControl_softReset) == 0)
+ return 0;
+ msleep(1);
+ }
+
+ return -EBUSY;
+}
+
+/* ---------- pci subsystem interface ---------- */
+
+enum {
+ CLEANUP_IRQ,
+ CLEANUP_SELF_ID,
+ CLEANUP_REGISTERS,
+ CLEANUP_IOMEM,
+ CLEANUP_OHCI
+};
+
+static int cleanup(struct fw_ohci *ohci, int stage, int code)
+{
+ switch (stage) {
+ case CLEANUP_SELF_ID:
+ pci_free_consistent(ohci->dev, SELF_ID_BUF_SIZE,
+ ohci->self_id_cpu, ohci->self_id_bus);
+ case CLEANUP_REGISTERS:
+ kfree(ohci->it_context_list);
+ kfree(ohci->ir_context_list);
+ iounmap(ohci->registers);
+ case CLEANUP_IOMEM:
+ release_mem_region(pci_resource_start(ohci->dev, 0),
+ OHCI1394_REGISTER_SIZE);
+ case CLEANUP_OHCI:
+ fw_card_put(&ohci->card);
+ }
+
+ return code;
+}
+
+static int __devinit
+pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct fw_ohci *ohci;
+ u32 base, bus_options, max_receive, link_speed;
+ u64 guid;
+ int error_code;
+ size_t size;
+
+ if (pci_enable_device(dev)) {
+ fw_error("Failed to enable OHCI hardware.\n");
+ return -ENXIO;
+ }
+
+ ohci = kzalloc(sizeof *ohci, SLAB_KERNEL);
GFP_KERNEL
+ if (ohci == NULL) {
+ fw_error("Could not malloc fw_ohci data.\n");
+ return -ENOMEM;
+ }
+
+ pci_set_master(dev);
+ pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
+ pci_set_drvdata(dev, ohci);
+
+ ohci->dev = dev;
+ spin_lock_init(&ohci->lock);
+
+ tasklet_init(&ohci->bus_reset_tasklet,
+ bus_reset_tasklet, (unsigned long)ohci);
+
+ /* We hardcode the register set size, since some cards get
+ * this wrong and others have some extra registers after the
+ * OHCI range. We only use the OHCI registers, so there's no
+ * need to be clever. */
+ base = pci_resource_start(dev, 0);
+ if (!request_mem_region(base, OHCI1394_REGISTER_SIZE, ohci_driver_name)) {
ugh! use pci_request_regions(), not request_mem_region()
+ fw_error("MMIO resource (0x%x - 0x%x) unavailable\n",
+ base, base + OHCI1394_REGISTER_SIZE);
+ return cleanup(ohci, CLEANUP_OHCI, -EBUSY);
+ }
+
+ ohci->registers = ioremap(base, OHCI1394_REGISTER_SIZE);
+ if (ohci->registers == NULL) {
+ fw_error("Failed to remap registers\n");
+ return cleanup(ohci, CLEANUP_IOMEM, -ENXIO);
+ }
pci_iomap() does a lot of this
+ if (software_reset(ohci)) {
+ fw_error("Failed to reset ohci card.\n");
+ return cleanup(ohci, CLEANUP_REGISTERS, -EBUSY);
+ }
+
+ /* Now enable LPS, which we need in order to start accessing
+ * most of the registers. In fact, on some cards (ALI M5251),
+ * accessing registers in the SClk domain without LPS enabled
+ * will lock up the machine. Wait 50msec to make sure we have
+ * full link enabled. */
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_LPS |
+ OHCI1394_HCControl_postedWriteEnable);
+ msleep(50);
PCI posting
+ /* self-id dma buffer allocation */
+ ohci->self_id_cpu = pci_alloc_consistent(ohci->dev, SELF_ID_BUF_SIZE,
+ &ohci->self_id_bus);
+ if (ohci->self_id_cpu == NULL) {
+ fw_error("Out of memory for self ID buffer.\n");
+ return cleanup(ohci, CLEANUP_REGISTERS, -ENOMEM);
+ }
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_LinkControlSet,
+ OHCI1394_LinkControl_rcvSelfID |
+ OHCI1394_LinkControl_cycleTimerEnable |
+ OHCI1394_LinkControl_cycleMaster);
+
+ ar_context_init(&ohci->ar_request_ctx, ohci,
+ OHCI1394_AsReqRcvContextControlSet);
+
+ ar_context_init(&ohci->ar_response_ctx, ohci,
+ OHCI1394_AsRspRcvContextControlSet);
+
+ at_context_init(&ohci->at_request_ctx, ohci,
+ OHCI1394_AsReqTrContextControlSet);
+
+ at_context_init(&ohci->at_response_ctx, ohci,
+ OHCI1394_AsRspTrContextControlSet);
+
+ reg_write(ohci, OHCI1394_ATRetries,
+ OHCI1394_MAX_AT_REQ_RETRIES |
+ (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
+ (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
+
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
+ ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
+ size = sizeof(struct iso_context) * hweight32(ohci->it_context_mask);
+ ohci->it_context_list = kzalloc(size, GFP_KERNEL);
+
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0);
+ ohci->ir_context_mask = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0);
+ size = sizeof(struct iso_context) * hweight32(ohci->ir_context_mask);
+ ohci->ir_context_list = kzalloc(size, GFP_KERNEL);
+
+ if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) {
+ fw_error("Out of memory for it/ir contexts.\n");
+ return cleanup(ohci, CLEANUP_REGISTERS, -ENOMEM);
+ }
+
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
+ reg_write(ohci, OHCI1394_IntEventClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskSet,
+ OHCI1394_selfIDComplete |
+ OHCI1394_RQPkt | OHCI1394_RSPkt |
+ OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
+ OHCI1394_isochRx | OHCI1394_isochTx |
+ OHCI1394_masterIntEnable);
+
+ bus_options = reg_read(ohci, OHCI1394_BusOptions);
+ max_receive = (bus_options >> 12) & 0xf;
+ link_speed = bus_options & 0x7;
+ guid = (__u64) reg_read(ohci, OHCI1394_GUIDHi) << 32 |
+ reg_read(ohci, OHCI1394_GUIDLo);
+
+ error_code = fw_core_add_card(&ohci->card, &ohci_driver, &dev->dev,
+ max_receive, link_speed, guid);
+ if (error_code < 0)
+ return cleanup(ohci, CLEANUP_SELF_ID, error_code);
+
+ fw_notify("Added fw-ohci device %s.\n", dev->dev.bus_id);
+
+ return 0;
+}
+
+static void pci_remove(struct pci_dev *dev)
+{
+ struct fw_ohci *ohci;
+
+ ohci = pci_get_drvdata(dev);
+ if (ohci == NULL)
+ return;
test for event that will never occur
+ free_irq(ohci->dev->irq, ohci);
+ fw_core_remove_card(&ohci->card);
+
+ /* FIXME: Fail all pending packets here, now that the upper
+ * layers can't queue any more. */
+
+ software_reset(ohci);
+ cleanup(ohci, CLEANUP_SELF_ID, 0);
+
+ fw_notify("Removed fw-ohci device.\n");
need to call pci_disable_device(), pci_release_regions()
+static struct pci_device_id pci_table[] = {
+ {
+ .class = PCI_CLASS_FIREWIRE_OHCI,
+ .class_mask = PCI_ANY_ID,
I'm not sure this is a proper class_mask?
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_table);
+
+static struct pci_driver fw_ohci_pci_driver = {
+ .name = ohci_driver_name,
+ .id_table = pci_table,
+ .probe = pci_probe,
+ .remove = pci_remove,
+};
+
+MODULE_AUTHOR("Kristian Høgsberg <[email protected]>");
+MODULE_DESCRIPTION("Driver for PCI OHCI IEEE1394 controllers");
+MODULE_LICENSE("GPL");
+
+static int __init fw_ohci_init(void)
+{
+ if (pci_register_driver(&fw_ohci_pci_driver)) {
+ fw_error("Failed to register PCI driver.\n");
+ return -EBUSY;
+ }
+
+ fw_notify("Loaded fw-ohci driver.\n");
+
+ return 0;
just return pci_register_driver() return value directly, don't invent
your own error when pci_register_driver() already returned a
more-correct error code
+static void __exit fw_ohci_cleanup(void)
+{
+ pci_unregister_driver(&fw_ohci_pci_driver);
+ fw_notify("Unloaded fw-ohci driver.\n");
+}
+
+module_init(fw_ohci_init);
+module_exit(fw_ohci_cleanup);
diff --git a/drivers/fw/fw-ohci.h b/drivers/fw/fw-ohci.h
new file mode 100644
index 0000000..e200b1b
--- /dev/null
+++ b/drivers/fw/fw-ohci.h
@@ -0,0 +1,152 @@
+#ifndef __fw_ohci_h
+#define __fw_ohci_h
+
+/* OHCI register map */
+
+#define OHCI1394_Version 0x000
+#define OHCI1394_GUID_ROM 0x004
+#define OHCI1394_ATRetries 0x008
+#define OHCI1394_CSRData 0x00C
+#define OHCI1394_CSRCompareData 0x010
+#define OHCI1394_CSRControl 0x014
+#define OHCI1394_ConfigROMhdr 0x018
+#define OHCI1394_BusID 0x01C
+#define OHCI1394_BusOptions 0x020
+#define OHCI1394_GUIDHi 0x024
+#define OHCI1394_GUIDLo 0x028
+#define OHCI1394_ConfigROMmap 0x034
+#define OHCI1394_PostedWriteAddressLo 0x038
+#define OHCI1394_PostedWriteAddressHi 0x03C
+#define OHCI1394_VendorID 0x040
+#define OHCI1394_HCControlSet 0x050
+#define OHCI1394_HCControlClear 0x054
+#define OHCI1394_HCControl_BIBimageValid 0x80000000
+#define OHCI1394_HCControl_noByteSwap 0x40000000
+#define OHCI1394_HCControl_programPhyEnable 0x00800000
+#define OHCI1394_HCControl_aPhyEnhanceEnable 0x00400000
+#define OHCI1394_HCControl_LPS 0x00080000
+#define OHCI1394_HCControl_postedWriteEnable 0x00040000
+#define OHCI1394_HCControl_linkEnable 0x00020000
+#define OHCI1394_HCControl_softReset 0x00010000
+#define OHCI1394_SelfIDBuffer 0x064
+#define OHCI1394_SelfIDCount 0x068
+#define OHCI1394_IRMultiChanMaskHiSet 0x070
+#define OHCI1394_IRMultiChanMaskHiClear 0x074
+#define OHCI1394_IRMultiChanMaskLoSet 0x078
+#define OHCI1394_IRMultiChanMaskLoClear 0x07C
+#define OHCI1394_IntEventSet 0x080
+#define OHCI1394_IntEventClear 0x084
+#define OHCI1394_IntMaskSet 0x088
+#define OHCI1394_IntMaskClear 0x08C
+#define OHCI1394_IsoXmitIntEventSet 0x090
+#define OHCI1394_IsoXmitIntEventClear 0x094
+#define OHCI1394_IsoXmitIntMaskSet 0x098
+#define OHCI1394_IsoXmitIntMaskClear 0x09C
+#define OHCI1394_IsoRecvIntEventSet 0x0A0
+#define OHCI1394_IsoRecvIntEventClear 0x0A4
+#define OHCI1394_IsoRecvIntMaskSet 0x0A8
+#define OHCI1394_IsoRecvIntMaskClear 0x0AC
+#define OHCI1394_InitialBandwidthAvailable 0x0B0
+#define OHCI1394_InitialChannelsAvailableHi 0x0B4
+#define OHCI1394_InitialChannelsAvailableLo 0x0B8
+#define OHCI1394_FairnessControl 0x0DC
+#define OHCI1394_LinkControlSet 0x0E0
+#define OHCI1394_LinkControlClear 0x0E4
+#define OHCI1394_LinkControl_rcvSelfID (1 << 9)
+#define OHCI1394_LinkControl_rcvPhyPkt (1 << 10)
+#define OHCI1394_LinkControl_cycleTimerEnable (1 << 20)
+#define OHCI1394_LinkControl_cycleMaster (1 << 21)
+#define OHCI1394_LinkControl_cycleSource (1 << 22)
+#define OHCI1394_NodeID 0x0E8
+#define OHCI1394_NodeID_idValid 0x80000000
+#define OHCI1394_PhyControl 0x0EC
+#define OHCI1394_PhyControl_Read(addr) (((addr) << 8) | 0x00008000)
+#define OHCI1394_PhyControl_ReadDone 0x80000000
+#define OHCI1394_PhyControl_ReadData(r) (((r) & 0x00ff0000) >> 16)
+#define OHCI1394_PhyControl_Write(addr, data) (((addr) << 8) | (data) | 0x00004000)
+#define OHCI1394_PhyControl_WriteDone 0x00004000
+#define OHCI1394_IsochronousCycleTimer 0x0F0
+#define OHCI1394_AsReqFilterHiSet 0x100
+#define OHCI1394_AsReqFilterHiClear 0x104
+#define OHCI1394_AsReqFilterLoSet 0x108
+#define OHCI1394_AsReqFilterLoClear 0x10C
+#define OHCI1394_PhyReqFilterHiSet 0x110
+#define OHCI1394_PhyReqFilterHiClear 0x114
+#define OHCI1394_PhyReqFilterLoSet 0x118
+#define OHCI1394_PhyReqFilterLoClear 0x11C
+#define OHCI1394_PhyUpperBound 0x120
+
+#define OHCI1394_AsReqTrContextBase 0x180
+#define OHCI1394_AsReqTrContextControlSet 0x180
+#define OHCI1394_AsReqTrContextControlClear 0x184
+#define OHCI1394_AsReqTrCommandPtr 0x18C
+
+#define OHCI1394_AsRspTrContextBase 0x1A0
+#define OHCI1394_AsRspTrContextControlSet 0x1A0
+#define OHCI1394_AsRspTrContextControlClear 0x1A4
+#define OHCI1394_AsRspTrCommandPtr 0x1AC
+
+#define OHCI1394_AsReqRcvContextBase 0x1C0
+#define OHCI1394_AsReqRcvContextControlSet 0x1C0
+#define OHCI1394_AsReqRcvContextControlClear 0x1C4
+#define OHCI1394_AsReqRcvCommandPtr 0x1CC
+
+#define OHCI1394_AsRspRcvContextBase 0x1E0
+#define OHCI1394_AsRspRcvContextControlSet 0x1E0
+#define OHCI1394_AsRspRcvContextControlClear 0x1E4
+#define OHCI1394_AsRspRcvCommandPtr 0x1EC
+
+/* Isochronous transmit registers */
+#define OHCI1394_IsoXmitContextBase(n) (0x200 + 16 * (n))
+#define OHCI1394_IsoXmitContextControlSet(n) (0x200 + 16 * (n))
+#define OHCI1394_IsoXmitContextControlClear(n) (0x204 + 16 * (n))
+#define OHCI1394_IsoXmitCommandPtr(n) (0x20C + 16 * (n))
+
+/* Isochronous receive registers */
+#define OHCI1394_IsoRcvContextControlSet(n) (0x400 + 32 * (n))
+#define OHCI1394_IsoRcvContextControlClear(n) (0x404 + 32 * (n))
+#define OHCI1394_IsoRcvCommandPtr(n) (0x40C + 32 * (n))
+#define OHCI1394_IsoRcvContextMatch(n) (0x410 + 32 * (n))
+
+/* Interrupts Mask/Events */
+#define OHCI1394_reqTxComplete 0x00000001
+#define OHCI1394_respTxComplete 0x00000002
+#define OHCI1394_ARRQ 0x00000004
+#define OHCI1394_ARRS 0x00000008
+#define OHCI1394_RQPkt 0x00000010
+#define OHCI1394_RSPkt 0x00000020
+#define OHCI1394_isochTx 0x00000040
+#define OHCI1394_isochRx 0x00000080
+#define OHCI1394_postedWriteErr 0x00000100
+#define OHCI1394_lockRespErr 0x00000200
+#define OHCI1394_selfIDComplete 0x00010000
+#define OHCI1394_busReset 0x00020000
+#define OHCI1394_phy 0x00080000
+#define OHCI1394_cycleSynch 0x00100000
+#define OHCI1394_cycle64Seconds 0x00200000
+#define OHCI1394_cycleLost 0x00400000
+#define OHCI1394_cycleInconsistent 0x00800000
+#define OHCI1394_unrecoverableError 0x01000000
+#define OHCI1394_cycleTooLong 0x02000000
+#define OHCI1394_phyRegRcvd 0x04000000
+#define OHCI1394_masterIntEnable 0x80000000
+
+#define OHCI1394_evt_no_status 0x0
+#define OHCI1394_evt_long_packet 0x2
+#define OHCI1394_evt_missing_ack 0x3
+#define OHCI1394_evt_underrun 0x4
+#define OHCI1394_evt_overrun 0x5
+#define OHCI1394_evt_descriptor_read 0x6
+#define OHCI1394_evt_data_read 0x7
+#define OHCI1394_evt_data_write 0x8
+#define OHCI1394_evt_bus_reset 0x9
+#define OHCI1394_evt_timeout 0xa
+#define OHCI1394_evt_tcode_err 0xb
+#define OHCI1394_evt_reserved_b 0xc
+#define OHCI1394_evt_reserved_c 0xd
+#define OHCI1394_evt_unknown 0xe
+#define OHCI1394_evt_flushed 0xf
+
+#define OHCI1394_phy_tcode 0xe
consider enum{} for reasons mentioned above
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
