Re: 2.6.19-rt1: max latencies with jackd

[Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>]

On Fri, 2006-12-01 at 09:08 +0100, Ingo Molnar wrote:
> * Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> wrote:
> could you try the patch below? It changes trace entries to be measured 
> via get_cycles() again [which should be must faster than pmtimer on your 
> CPU], but keeps the latency tracing timestamps (the timestamp of the 
> start/end of critical sections) on pmtimer again. This should give us 
> accurate latency measurements, but fast trace entries.
> 
> you can still revert to the conservative timestamping behavior via:
> 
> 	echo 0 > /proc/sys/kernel/trace_use_raw_cycles
> 
> note: you can probably get a higher quality of 'overview trace' via:
> 
> 	echo 0 > /proc/sys/kernel/mcount_enabled
> 	echo 1 > /proc/sys/kernel/stackframe_tracing

If I do this I get a lockup or an instant reboot. 

But it looks like something is wrong. I'm not getting traces at all and
the preempt_max_latency remains stubbornly at 0. 

I'll try with the previous kernel but I'll just turn on tracing for all
activity, not just within the jackd client activation cycle. It looks
like the xruns are happening elsewhere. 

-- Fernando

PS: this is what I'm using to "arm" the trace (from the trace-it.c
example):

-----
#!/bin/bash
#

echo 1 > /proc/sys/kernel/trace_user_triggered
[ -e /proc/sys/kernel/wakeup_timing ] && echo 1
> /proc/sys/kernel/wakeup_timing
echo 1 > /proc/sys/kernel/trace_enabled

# get better quality traces
echo 1 > /proc/sys/kernel/mcount_enabled
# echo 0 > /proc/sys/kernel/mcount_enabled
# echo 1 > /proc/sys/kernel/stackframe_tracing

echo 0 > /proc/sys/kernel/trace_freerunning
echo 0 > /proc/sys/kernel/trace_print_at_crash
echo 0 > /proc/sys/kernel/trace_verbose
echo 0 > /proc/sys/kernel/preempt_thresh 2>/dev/null
echo 0 > /proc/sys/kernel/preempt_max_latency 2>/dev/null
-----


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/