Re: [PATCH 3/3] x86: when acpi_noirq is set, use mptable instead of MADT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/26/06, Len Brown <[email protected]> wrote:

So the bigger question is why you need these workarounds in the first place.

in the LinuxBIOS, acpi support is there including acpi tables and dsdt
for amd chipset.
but for other chipset, I can not put dsdt there. becase we need one
clean room implementation for dsdt with those chipset.

So I have all acpi tables (SRAT, SLIT, ...) but no dsdt.
We need to use mptable instead of MADT + dsdt for io apic irq routing.

I forget to remove MADT in one test, the kernel will skip the mptable.

After look at the kernel acpi code, it turns out that
acpi_process_madt will set acpi_lapic, and acpi_ioapic.  So
get_smp_config will skip the mptable.

With normal BIOS, if there is problem with DSDT, and you are trying
acpi=noirq, it means you are going to PIC mode instead of APIC mode if
you are skipping mptable.

YH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux