In gmane.linux.kernel, you wrote:
> Hi!
Hallo.
> We are building embedded devices based on Linux and we use a ramdisk as
> our root device in order to avoid problems with people switching off the
> unit without a proper shutdown and to save write-cycles on our flash disc.
>
> Using a 2.6.12 kernel it was no problem to boot the system by using this
> kernel parameters:
> load_ramdisk=1 console=tty0 initrd=initrd.gz rw vga=769
> ramdisk_size=32768 root=/dev/ram0
>
> Today I tried to test run a 2.6.17.12 kernel using the same parameters
> but I get this error message:
> VFS: Cannot open root device "ram0" or unknown-block(1,0)
> Please append a correct "root=" boot option
In subject you've wrote "2.6.17.13", but anyway in such cases one must
include full dmesg (boot output) and (sometimes) ".config".
Also, if you are using some kind of embedded hardware, f.e. ARM,
please, use arm-user mailing list for such questions.
____
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
