From: [email protected] <[email protected]>
The remote as well as the GPIO interface is the same as what comes with 777.
For an example of mplayer lirc configuration, see
http://pasky.or.cz/~pasky/dev/v4l/lircrc
Signed-off-by: Petr Baudis <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/media/video/saa7134/saa7134-cards.c | 2 +-
drivers/media/video/saa7134/saa7134-input.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 94324b3..1a402e4 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3735,6 +3735,7 @@ int saa7134_board_init1(struct saa7134_d
case SAA7134_BOARD_FLYDVBT_LR301:
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_PROTEUS_2309:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
@@ -3773,7 +3774,6 @@ int saa7134_board_init1(struct saa7134_d
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
break;
- case SAA7134_BOARD_AVERMEDIA_A16AR:
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e8dcb6f..7f62403 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -185,7 +185,6 @@ int saa7134_input_init1(struct saa7134_d
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
- case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
@@ -195,6 +194,7 @@ int saa7134_input_init1(struct saa7134_d
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
case SAA7134_BOARD_AVERMEDIA_777:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x02F200;
mask_keydown = 0x000400;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
