cyclades, cleanup
- remove cvs rcsid and alter code that uses it.
- allow a semicolon after use of macro to not confuse parsers (e.g. indent)
by do {} while (0)
- JIFFIES_DIFF is simple subtraction, subtract directly
- returns cleanup -- do not put values in parenthesis and do not return nothing
at the end of void functions
- comments are /* */ in C (not //)
Signed-off-by: Jiri Slaby <[email protected]>
---
commit 76495d5f78bf804b07f646abfbcb7a0a12938e11
tree 64678a10d342b5be363cce1200139f8be190318d
parent 55af131be8da830a1580ce56331e7388a1eebb95
author Jiri Slaby <[email protected]> Thu, 09 Nov 2006 21:58:58 +0100
committer Jiri Slaby <[email protected]> Thu, 09 Nov 2006 21:58:58 +0100
drivers/char/cyclades.c | 133 ++++++++++++++++++-----------------------------
1 files changed, 50 insertions(+), 83 deletions(-)
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index dd06880..f3efe85 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -1,7 +1,6 @@
#undef BLOCKMOVE
#define Z_WAKE
#undef Z_EXT_CHARS_IN_BUFFER
-static char rcsid[] = "$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
/*
* linux/drivers/char/cyclades.c
@@ -592,6 +591,8 @@ static char rcsid[] = "$Revision: 2.3.2.
*
*/
+#define CY_VERSION "2.4"
+
/* If you need to install more boards than NR_CARDS, change the constant
in the definition below. No other change is necessary to support up to
eight boards. Beyond that you'll have to extend cy_isa_addresses. */
@@ -624,9 +625,9 @@ #undef CY_ENABLE_MONITORING
#undef CY_PCI_DEBUG
#if 0
-#define PAUSE __asm__("nop");
+#define PAUSE __asm__("nop")
#else
-#define PAUSE ;
+#define PAUSE do {} while (0)
#endif
/*
@@ -697,8 +698,6 @@ #define WAKEUP_CHARS 256
#define STD_COM_FLAGS (0)
-#define JIFFIES_DIFF(n, j) ((j) - (n))
-
static struct tty_driver *cy_serial_driver;
#ifdef CONFIG_ISA
@@ -870,26 +869,22 @@ static inline int serial_paranoia_check(
char *name, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
- static const char *badmagic =
- "cyc Warning: bad magic number for serial struct (%s) in %s\n";
- static const char *badinfo =
- "cyc Warning: null cyclades_port for (%s) in %s\n";
- static const char *badrange =
- "cyc Warning: cyclades_port out of range for (%s) in %s\n";
-
if (!info) {
- printk(badinfo, name, routine);
+ printk("cyc Warning: null cyclades_port for (%s) in %s\n",
+ name, routine);
return 1;
}
if ((long)info < (long)(&cy_port[0]) ||
(long)(&cy_port[NR_PORTS]) < (long)info) {
- printk(badrange, name, routine);
+ printk("cyc Warning: cyclades_port out of range for (%s) in "
+ "%s\n", name, routine);
return 1;
}
if (info->magic != CYCLADES_MAGIC) {
- printk(badmagic, name, routine);
+ printk("cyc Warning: bad magic number for serial struct (%s) "
+ "in %s\n", name, routine);
return 1;
}
#endif
@@ -994,12 +989,12 @@ static int cyy_issue_cmd(void __iomem *
/* if the CCR never cleared, the previous command
didn't finish within the "reasonable time" */
if (i == 100)
- return (-1);
+ return -1;
/* Issue the new command */
cy_writeb(base_addr + (CyCCR << index), cmd);
- return (0);
+ return 0;
} /* cyy_issue_cmd */
#ifdef CONFIG_ISA
@@ -1514,7 +1509,7 @@ cyz_fetch_msg(struct cyclades_card *cinf
firm_id = cinfo->base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
- return (-1);
+ return -1;
}
zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
0xfffff);
@@ -1545,7 +1540,7 @@ cyz_issue_cmd(struct cyclades_card *cinf
firm_id = cinfo->base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
- return (-1);
+ return -1;
}
zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
0xfffff);
@@ -1556,7 +1551,7 @@ cyz_issue_cmd(struct cyclades_card *cinf
&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
while ((cy_readl(pci_doorbell) & 0xff) != 0) {
if (index++ == 1000) {
- return ((int)(cy_readl(pci_doorbell) & 0xff));
+ return (int)(cy_readl(pci_doorbell) & 0xff);
}
udelay(50L);
}
@@ -1564,7 +1559,7 @@ cyz_issue_cmd(struct cyclades_card *cinf
cy_writel(&board_ctrl->hcmd_param, param);
cy_writel(pci_doorbell, (long)cmd);
- return (0);
+ return 0;
} /* cyz_issue_cmd */
static void
@@ -1962,8 +1957,6 @@ static void cyz_poll(unsigned long arg)
cyz_timerlist.expires = jiffies + cyz_polling_cycle;
}
add_timer(&cyz_timerlist);
-
- return;
} /* cyz_poll */
#endif /* CONFIG_CYZ_INTR */
@@ -2321,7 +2314,6 @@ #endif
#ifdef CY_DEBUG_OPEN
printk(" cyc shutdown done\n");
#endif
- return;
} /* shutdown */
/*
@@ -2352,8 +2344,7 @@ block_til_ready(struct tty_struct *tty,
if (info->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&info->close_wait);
}
- return ((info->
- flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
+ return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
/*
@@ -2632,8 +2623,7 @@ #endif
if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
- return ((info->
- flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
+ return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
/*
@@ -2730,7 +2720,7 @@ #endif
break;
}
} else {
- // Nothing to do!
+ /* Nothing to do! */
}
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
@@ -2872,7 +2862,6 @@ #ifdef CY_DEBUG_OTHER
#endif
CY_UNLOCK(info, flags);
- return;
} /* cy_close */
/* This routine gets called when tty_write has put something into
@@ -3056,7 +3045,7 @@ #ifdef Z_EXT_CHARS_IN_BUFFER
#ifdef CY_DEBUG_IO
printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); /* */
#endif
- return (info->xmit_cnt + char_count);
+ return info->xmit_cnt + char_count;
}
#endif /* Z_EXT_CHARS_IN_BUFFER */
} /* cy_chars_in_buffer */
@@ -3921,7 +3910,7 @@ static int set_threshold(struct cyclades
cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
CY_UNLOCK(info, flags);
} else {
- // Nothing to do!
+ /* Nothing to do! */
}
return 0;
} /* set_threshold */
@@ -3945,7 +3934,7 @@ get_threshold(struct cyclades_port *info
tmp = cy_readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
return put_user(tmp, value);
} else {
- // Nothing to do!
+ /* Nothing to do! */
return 0;
}
} /* get_threshold */
@@ -3982,7 +3971,7 @@ static int set_timeout(struct cyclades_p
cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
CY_UNLOCK(info, flags);
} else {
- // Nothing to do!
+ /* Nothing to do! */
}
return 0;
} /* set_timeout */
@@ -4005,7 +3994,7 @@ static int get_timeout(struct cyclades_p
tmp = cy_readb(base_addr + (CyRTPR << index));
return put_user(tmp, value);
} else {
- // Nothing to do!
+ /* Nothing to do! */
return 0;
}
} /* get_timeout */
@@ -4252,8 +4241,6 @@ #if 0
(tty->termios->c_cflag & CLOCAL))
wake_up_interruptible(&info->open_wait);
#endif
-
- return;
} /* cy_set_termios */
/* This function is used to send a high-priority XON/XOFF character to
@@ -4340,8 +4327,6 @@ #endif
info->throttle = 1;
}
}
-
- return;
} /* cy_throttle */
/*
@@ -4399,8 +4384,6 @@ #endif
info->throttle = 0;
}
}
-
- return;
} /* cy_unthrottle */
/* cy_start and cy_stop provide software output flow control as a
@@ -4437,10 +4420,8 @@ #endif
cy_readb(base_addr + (CySRER << index)) & ~CyTxRdy);
CY_UNLOCK(info, flags);
} else {
- // Nothing to do!
+ /* Nothing to do! */
}
-
- return;
} /* cy_stop */
static void cy_start(struct tty_struct *tty)
@@ -4473,10 +4454,8 @@ #endif
cy_readb(base_addr + (CySRER << index)) | CyTxRdy);
CY_UNLOCK(info, flags);
} else {
- // Nothing to do!
+ /* Nothing to do! */
}
-
- return;
} /* cy_start */
static void cy_flush_buffer(struct tty_struct *tty)
@@ -4664,7 +4643,7 @@ #endif
for (i = 0; i < NR_ISA_ADDRS; i++) {
unsigned int isa_address = cy_isa_addresses[i];
if (isa_address == 0x0000) {
- return (nboard);
+ return nboard;
}
/* probe for CD1400... */
@@ -4694,7 +4673,7 @@ #endif
printk("but no more channels are available.\n");
printk("Change NR_PORTS in cyclades.c and recompile "
"kernel.\n");
- return (nboard);
+ return nboard;
}
/* fill the next cy_card structure available */
for (j = 0; j < NR_CARDS; j++) {
@@ -4707,7 +4686,7 @@ #endif
printk("but no more cards can be used .\n");
printk("Change NR_CARDS in cyclades.c and recompile "
"kernel.\n");
- return (nboard);
+ return nboard;
}
/* allocate IRQ */
@@ -4716,7 +4695,7 @@ #endif
printk("Cyclom-Y/ISA found at 0x%lx ",
(unsigned long)cy_isa_address);
printk("but could not allocate IRQ#%d.\n", cy_isa_irq);
- return (nboard);
+ return nboard;
}
/* set cy_card */
@@ -4737,9 +4716,9 @@ #endif
cy_isa_nchan, cy_next_channel);
cy_next_channel += cy_isa_nchan;
}
- return (nboard);
+ return nboard;
#else
- return (0);
+ return 0;
#endif /* CONFIG_ISA */
} /* cy_detect_isa */
@@ -4870,7 +4849,7 @@ #endif
printk("but no channels are available.\n");
printk("Change NR_PORTS in cyclades.c and "
"recompile kernel.\n");
- return (i);
+ return i;
}
/* fill the next cy_card structure available */
for (j = 0; j < NR_CARDS; j++) {
@@ -4883,7 +4862,7 @@ #endif
printk("but no more cards can be used.\n");
printk("Change NR_CARDS in cyclades.c and "
"recompile kernel.\n");
- return (i);
+ return i;
}
/* allocate IRQ */
@@ -4893,7 +4872,7 @@ #endif
(ulong) cy_pci_phys2);
printk("but could not allocate IRQ%d.\n",
cy_pci_irq);
- return (i);
+ return i;
}
/* set cy_card */
@@ -5032,7 +5011,7 @@ #ifdef CY_PCI_DEBUG
cy_writel(&((struct RUNTIME_9060 *)
(cy_pci_addr0))->loc_addr_base,
WIN_CREG);
- PAUSE
+ PAUSE;
printk("Cyclades-8Zo/PCI: FPGA id %lx, ver "
"%lx\n", (ulong) (0xff &
cy_readl(&((struct CUSTOM_REG *)
@@ -5053,7 +5032,7 @@ #endif
ensures that the driver will not attempt to talk to
the board until it has been properly initialized.
*/
- PAUSE
+ PAUSE;
if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L);
@@ -5067,7 +5046,7 @@ #endif
"no channels are available.\nChange "
"NR_PORTS in cyclades.c and recompile "
"kernel.\n", (ulong)cy_pci_phys2);
- return (i);
+ return i;
}
/* fill the next cy_card structure available */
@@ -5080,7 +5059,7 @@ #endif
"no more cards can be used.\nChange "
"NR_CARDS in cyclades.c and recompile "
"kernel.\n", (ulong)cy_pci_phys2);
- return (i);
+ return i;
}
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
@@ -5092,7 +5071,7 @@ #ifdef CONFIG_CYZ_INTR
"but could not allocate "
"IRQ%d.\n", (ulong)cy_pci_phys2,
cy_pci_irq);
- return (i);
+ return i;
}
}
#endif /* CONFIG_CYZ_INTR */
@@ -5152,7 +5131,7 @@ #ifdef CY_PCI_DEBUG
printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not "
"loaded\n");
#endif
- PAUSE
+ PAUSE;
/* This must be the new Cyclades-Ze/PCI. */
cy_pci_nchan = ZE_V1_NPORTS;
@@ -5161,7 +5140,7 @@ #endif
"are available.\nChange NR_PORTS in cyclades.c "
"and recompile kernel.\n",
(ulong) cy_pci_phys2);
- return (i);
+ return i;
}
/* fill the next cy_card structure available */
@@ -5174,7 +5153,7 @@ #endif
"cards can be used.\nChange NR_CARDS in "
"cyclades.c and recompile kernel.\n",
(ulong) cy_pci_phys2);
- return (i);
+ return i;
}
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
@@ -5186,7 +5165,7 @@ #ifdef CONFIG_CYZ_INTR
(ulong) cy_pci_phys2);
printk("but could not allocate IRQ%d.\n",
cy_pci_irq);
- return (i);
+ return i;
}
}
#endif /* CONFIG_CYZ_INTR */
@@ -5225,9 +5204,9 @@ #endif /* CONFIG_CYZ_INTR */
"used.\nChange NR_CARDS in cyclades.c and recompile "
"kernel.\n", (unsigned int)Ze_phys2[0]);
}
- return (i);
+ return i;
#else
- return (0);
+ return 0;
#endif /* ifdef CONFIG_PCI */
} /* cy_detect_pci */
@@ -5237,16 +5216,7 @@ #endif /* ifdef CONFIG_PCI */
*/
static inline void show_version(void)
{
- char *rcsvers, *rcsdate, *tmp;
- rcsvers = strchr(rcsid, ' ');
- rcsvers++;
- tmp = strchr(rcsvers, ' ');
- *tmp++ = '\0';
- rcsdate = strchr(tmp, ' ');
- rcsdate++;
- tmp = strrchr(rcsdate, ' ');
- *tmp = '\0';
- printk("Cyclades driver %s %s\n", rcsvers, rcsdate);
+ printk("Cyclades driver " CY_VERSION "\n");
printk(" built %s %s\n", __DATE__, __TIME__);
} /* show_version */
@@ -5275,14 +5245,11 @@ cyclades_get_proc_info(char *buf, char *
if (info->count)
size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu "
"%8lu %9lu %6ld\n", info->line,
- JIFFIES_DIFF(info->idle_stats.in_use,
- cur_jifs) / HZ,
+ (cur_jifs - info->idle_stats.in_use) / HZ,
info->idle_stats.xmit_bytes,
- JIFFIES_DIFF(info->idle_stats.xmit_idle,
- cur_jifs) / HZ,
+ (cur_jifs - info->idle_stats.xmit_idle) / HZ,
info->idle_stats.recv_bytes,
- JIFFIES_DIFF(info->idle_stats.recv_idle,
- cur_jifs) / HZ,
+ (cur_jifs - info->idle_stats.recv_idle) / HZ,
info->idle_stats.overruns,
(long)info->tty->ldisc.num);
else
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
