Re: Abysmal PATA IDE performance

["Luca Tettamanti" <kronos.it@gmail.com>]

On 11/9/06, Stephen Clark <Stephen.Clark@seclark.us> wrote:
> Luca Tettamanti wrote:
>
> >Stephen Clark <Stephen.Clark@seclark.us> ha scritto:
> >
> >
> >>Looking at the dmesg output I am a little confused, see comments below:
> >>partial dmesg output follows:
> >>
> >>SCSI subsystem initialized
> >>libata version 2.00 loaded.
> >>ata_piix 0000:00:1f.2: version 2.00
> >>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> >>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
> >>PCI: Setting latency timer of device 0000:00:1f.2 to 64
> >>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
> >>scsi0 : ata_piix
> >>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
> >>input: SynPS/2 Synaptics TouchPad as /class/input/input1
> >>ATA: abnormal status 0x7F on port 0x1F7
> >>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
> >>scsi1 : ata_piix
> >>ata2.00: ATA-6, max UDMA/100, 117210240 sectors: LBA48
> >>ata2.00: ata2: dev 0 multi count 16
> >>usb 2-2: new low speed USB device using uhci_hcd and address 3
> >>ata2.01: ATAPI, max UDMA/33
> >>ata2.00: configured for UDMA/33 <==== why isn't this 66 or 100 ?
> >>===============****
> >>
> >>
> >
> >This is your optical (CD/DVD) unit; I doubt that you can saturate that
> >link, even if your drive can do a sustained 16x transfer with a DVD it
> >will use only 21MBps. Your HD is using UDMA/100.
>
> aren't the ata2.00: messages referring to my hard drive and the
> ata2.01 messages referring to my optical drive?
>
> ata2.00: ATA-6, max UDMA/100, 117210240 sectors: LBA48
> ata2.00: ata2: dev 0 multi count 16
>
> ata2.01: ATAPI, max UDMA/33
>
> ata2.00: configured for UDMA/33 <==== why isn't this 66 or 100 ?

You're right, I misparsed your log. Probably Arjan is right about the wiring.

Luca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/