Hi!
> [Please CC me on responses].
>
> A spot of weirdness I ran into on my e1000 card.
> It's the 82566DC model [8086:104b] (rev 02) x1 PCIe.
>
> After modprobe e1000, ethtool reports that there is no link, despite the
> correct link lights on the port. This breaks booting during a boot process that
> checks for actual link status before using a device.
...
> This behavior differs from every other network card, and is also present in the
> 7.3* version of the driver from sourceforge.
>
> I think the e1000 should try to raise the link during the probe, so that it
> works properly, without having to set ifconfig ethX up first.
I think you should cc e1000 maintainers, and perhaps provide a patch....
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]