Ar Llu, 2006-11-06 am 12:47 +0000, ysgrifennodd Sergio Monteiro Basto:
> this is the latest patch
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18/2.6.18-mm1/broken-out/via-irq-quirk-behaviour-change.patch
> about this issue please try it and report the experience :)
There are several minor problems with this patch:
- V-Link which is what we are dealing with is only found in the VIA 8233
and later devices and early stuff should not be touched
- It whacks external devices
I think something like this (untested) would be better
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.19-rc4-mm1/drivers/pci/quirks.c linux-2.6.19-rc4-mm1/drivers/pci/quirks.c
--- linux.vanilla-2.6.19-rc4-mm1/drivers/pci/quirks.c 2006-10-31 21:11:49.000000000 +0000
+++ linux-2.6.19-rc4-mm1/drivers/pci/quirks.c 2006-11-06 20:39:03.026705152 +0000
@@ -641,48 +641,42 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
-/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * Some of the on-chip devices are actually '586 devices' so they are
- * listed here.
- */
-
-static int via_irq_fixup_needed = -1;
/*
- * As some VIA hardware is available in PCI-card form, we need to restrict
- * this quirk to VIA PCI hardware built onto VIA-based motherboards only.
- * We try to locate a VIA southbridge before deciding whether the quirk
- * should be applied.
- */
-static const struct pci_device_id via_irq_fixup_tbl[] = {
- {
- .vendor = PCI_VENDOR_ID_VIA,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = PCI_CLASS_BRIDGE_ISA << 8,
- .class_mask = 0xffff00,
- },
+ * VIA bridges which have VLink
+ */
+
+static const struct pci_device_id via_vlink_fixup_tbl[] = {
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_0), 17},
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233A), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233C_0), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8235), 16 },
+ /* May not be needed for the 8237 */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237), 15 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237A), 15 },
{ 0, },
};
-static void quirk_via_irq(struct pci_dev *dev)
+/**
+ * quirk_via_vlink - VIA VLink IRQ number update
+ * @dev: PCI device
+ *
+ * If the device we are dealing with is on a PIC IRQ we need to
+ * ensure that the IRQ line register which usually is not relevant
+ * for PCI cards, is actually written so that interrupts get sent
+ * to the right place
+ */
+
+static void quirk_via_vlink(struct pci_dev *dev)
{
+ static struct pci_device_id *via_vlink_fixup = NULL;
u8 irq, new_irq;
- if (via_irq_fixup_needed == -1)
- via_irq_fixup_needed = pci_dev_present(via_irq_fixup_tbl);
-
- if (!via_irq_fixup_needed)
+ /* Check if we have VLink and cache the result */
+
+ if (via_vlink_fixup == NULL)
+ via_vlink_fixup = pci_find_present(via_irq_fixup_tbl);
+ if (via_vlink_fixup == NULL)
return;
new_irq = dev->irq;
@@ -691,9 +685,17 @@
if (!new_irq || new_irq > 15)
return;
+ /* Internal device ? */
+ if (pdev->bus->number != 0 || PCI_FUNC(dev->devfn) > 18 ||
+ PCI_FUNC(dev->devfn) < via_vlink_fixup->driver_data)
+ return;
+
+ /* This is an internal VLink device on a PIC interrupt. The BIOS
+ ought to have set this but may not have, so we redo it */
+
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA VLink IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.19-rc4-mm1/drivers/pci/search.c linux-2.6.19-rc4-mm1/drivers/pci/search.c
--- linux.vanilla-2.6.19-rc4-mm1/drivers/pci/search.c 2006-10-31 21:11:31.000000000 +0000
+++ linux-2.6.19-rc4-mm1/drivers/pci/search.c 2006-11-06 20:30:55.548813056 +0000
@@ -413,30 +413,17 @@
return dev;
}
-/**
- * pci_dev_present - Returns 1 if device matching the device list is present, 0 if not.
- * @ids: A pointer to a null terminated list of struct pci_device_id structures
- * that describe the type of PCI device the caller is trying to find.
- *
- * Obvious fact: You do not have a reference to any device that might be found
- * by this function, so if that device is removed from the system right after
- * this function is finished, the value will be stale. Use this function to
- * find devices that are usually built into a system, or for a general hint as
- * to if another device happens to be present at this specific moment in time.
- */
-int pci_dev_present(const struct pci_device_id *ids)
+struct pci_device_id *pci_find_present(const struct pci_device_id *ids)
{
struct pci_dev *dev;
- int found = 0;
+ struct pci_device_id * found = NULL;
WARN_ON(in_interrupt());
down_read(&pci_bus_sem);
while (ids->vendor || ids->subvendor || ids->class_mask) {
list_for_each_entry(dev, &pci_devices, global_list) {
- if (pci_match_one_device(ids, dev)) {
- found = 1;
- goto exit;
- }
+ if ((found = pci_match_one_device(ids, dev)) != NULL)
+ break;
}
ids++;
}
@@ -444,7 +431,26 @@
up_read(&pci_bus_sem);
return found;
}
+
+/**
+ * pci_dev_present - Returns 1 if device matching the device list is present, 0 if not.
+ * @ids: A pointer to a null terminated list of struct pci_device_id structures
+ * that describe the type of PCI device the caller is trying to find.
+ *
+ * Obvious fact: You do not have a reference to any device that might be found
+ * by this function, so if that device is removed from the system right after
+ * this function is finished, the value will be stale. Use this function to
+ * find devices that are usually built into a system, or for a general hint as
+ * to if another device happens to be present at this specific moment in time.
+ */
+
+int pci_dev_present(const struct pci_device_id *ids)
+{
+ return pci_find_present(ids) == NULL ? 0 : 1;
+}
+
EXPORT_SYMBOL(pci_dev_present);
+EXPORT_SYMBOL(pci_find_present);
EXPORT_SYMBOL(pci_find_device);
EXPORT_SYMBOL(pci_find_device_reverse);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.19-rc4-mm1/include/linux/pci.h linux-2.6.19-rc4-mm1/include/linux/pci.h
--- linux.vanilla-2.6.19-rc4-mm1/include/linux/pci.h 2006-10-31 21:11:50.000000000 +0000
+++ linux-2.6.19-rc4-mm1/include/linux/pci.h 2006-11-06 20:31:30.524495944 +0000
@@ -461,6 +461,7 @@
struct pci_dev *pci_get_bus_and_slot (unsigned int bus, unsigned int devfn);
struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from);
int pci_dev_present(const struct pci_device_id *ids);
+struct pci_device_id *pci_find_present(const struct pci_device_id *ids);
int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val);
int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val);
@@ -684,6 +685,7 @@
{ return NULL; }
#define pci_dev_present(ids) (0)
+#define pci_find_present(ids) (NULL)
#define pci_dev_put(dev) do { } while (0)
static inline void pci_set_master(struct pci_dev *dev) { }
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
