Re: SATA ICH5 not detected at boot, mm-kernels

[Fabio Coatti <cova@ferrara.linux.it>]

Alle 13:43, lunedì 6 novembre 2006, Tejun Heo ha scritto:

> >> (320073 MB)
> >> Nov  5 13:26:37 kefk sdc: Write Protect is off
> >
> > And why doesn't -mm report the same conflict?  I assume the .config is
> > the same?
>
> Also, please post full dmesg of both kernels.

Sure; now I'm far from the afflicted machine, but I'll post dmesg and .config 
for all kernels (I've to use serial console debug for the non working one: 
the non working drive,unfortunately, is needed to have machine up and 
running  :) .). 
I'm pretty sure that the configs between 2.6.18-mm3 and 2.6.19-rcXmmY are the 
same; I've compiled newer kernel using make oldconfig based on 
working .config. But in the last days I've tweaked the configs trying to make 
it work, so I'll start a fresh build to avoid any doubt. I'll do this as soon 
as I'm again near the machine (I've no remote maintenance facility on this 
machine)

-- 
Fabio "Cova" Coatti    http://members.ferrara.linux.it/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/