istallion, convert to pci probing
Use probing for pci devices. Change some __inits to __devinits to use these
functions in probe function. Create stli_cleanup_ports and move there
cleanup code from module_exit() code to not have duplicite cleanup code.
Signed-off-by: Jiri Slaby <[email protected]>
---
commit b90798585707a33d1835b752a18f1ca3b6a7da7b
tree 7c99e2bcca81b25dc3ffdcf288b5a9c35433c098
parent 7e8fb7980d776e6a7c0bd84cc48b1cb9de139b8f
author Jiri Slaby <[email protected]> Sun, 29 Oct 2006 23:37:48 +0100
committer Jiri Slaby <[email protected]> Sat, 04 Nov 2006 18:26:39 +0059
drivers/char/istallion.c | 116 +++++++++++++++++++++++++++-------------------
1 files changed, 67 insertions(+), 49 deletions(-)
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index f07716b..9e73d0d 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -402,7 +402,6 @@ static int stli_eisamempsize = ARRAY_SIZ
/*
* Define the Stallion PCI vendor and device IDs.
*/
-#ifdef CONFIG_PCI
#ifndef PCI_VENDOR_ID_STALLION
#define PCI_VENDOR_ID_STALLION 0x124d
#endif
@@ -416,7 +415,7 @@ static struct pci_device_id istallion_pc
};
MODULE_DEVICE_TABLE(pci, istallion_pci_tbl);
-#endif /* CONFIG_PCI */
+static struct pci_driver stli_pcidriver;
/*****************************************************************************/
@@ -728,10 +727,6 @@ static int stli_initonb(stlibrd_t *brdp)
static int stli_eisamemprobe(stlibrd_t *brdp);
static int stli_initports(stlibrd_t *brdp);
-#ifdef CONFIG_PCI
-static int stli_initpcibrd(int brdtype, struct pci_dev *devp);
-#endif
-
/*****************************************************************************/
/*
@@ -768,6 +763,21 @@ #define STLI_TIMEOUT (jiffies + 1)
static struct class *istallion_class;
+static void stli_cleanup_ports(stlibrd_t *brdp)
+{
+ stliport_t *portp;
+ unsigned int j;
+
+ for (j = 0; j < STL_MAXPORTS; j++) {
+ portp = brdp->ports[j];
+ if (portp != NULL) {
+ if (portp->tty != NULL)
+ tty_hangup(portp->tty);
+ kfree(portp);
+ }
+ }
+}
+
/*
* Loadable module initialization stuff.
*/
@@ -783,12 +793,12 @@ static int __init istallion_module_init(
static void __exit istallion_module_exit(void)
{
stlibrd_t *brdp;
- stliport_t *portp;
- int i, j;
+ int i;
printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
stli_drvversion);
+ pci_unregister_driver(&stli_pcidriver);
/*
* Free up all allocated resources used by the ports. This includes
* memory and interrupts.
@@ -817,14 +827,8 @@ static void __exit istallion_module_exit
for (i = 0; (i < stli_nrbrds); i++) {
if ((brdp = stli_brds[i]) == NULL)
continue;
- for (j = 0; (j < STL_MAXPORTS); j++) {
- portp = brdp->ports[j];
- if (portp != NULL) {
- if (portp->tty != NULL)
- tty_hangup(portp->tty);
- kfree(portp);
- }
- }
+
+ stli_cleanup_ports(brdp);
iounmap(brdp->membase);
if (brdp->iosize > 0)
@@ -3777,7 +3781,7 @@ stli_donestartup:
* Probe and initialize the specified board.
*/
-static int __init stli_brdinit(stlibrd_t *brdp)
+static int __devinit stli_brdinit(stlibrd_t *brdp)
{
stli_brds[brdp->brdnr] = brdp;
@@ -4019,58 +4023,72 @@ static int stli_findeisabrds(void)
/*****************************************************************************/
-#ifdef CONFIG_PCI
-
/*
* We have a Stallion board. Allocate a board structure and
* initialize it. Read its IO and MEMORY resources from PCI
* configuration space.
*/
-static int stli_initpcibrd(int brdtype, struct pci_dev *devp)
+static int __devinit stli_pciprobe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
stlibrd_t *brdp;
-
- if (pci_enable_device(devp))
- return -EIO;
- if ((brdp = stli_allocbrd()) == NULL)
- return -ENOMEM;
- if ((brdp->brdnr = stli_getbrdnr()) < 0) {
+ int retval = -EIO;
+
+ retval = pci_enable_device(pdev);
+ if (retval)
+ goto err;
+ brdp = stli_allocbrd();
+ if (brdp == NULL) {
+ retval = -ENOMEM;
+ goto err;
+ }
+ if ((brdp->brdnr = stli_getbrdnr()) < 0) { /* TODO: locking */
printk(KERN_INFO "STALLION: too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
- return 0;
+ retval = -EIO;
+ goto err_fr;
}
- brdp->brdtype = brdtype;
+ brdp->brdtype = BRD_ECPPCI;
/*
* We have all resources from the board, so lets setup the actual
* board structure now.
*/
- brdp->iobase = pci_resource_start(devp, 3);
- brdp->memaddr = pci_resource_start(devp, 2);
- stli_brdinit(brdp);
+ brdp->iobase = pci_resource_start(pdev, 3);
+ brdp->memaddr = pci_resource_start(pdev, 2);
+ retval = stli_brdinit(brdp);
+ if (retval)
+ goto err_fr;
+
+ pci_set_drvdata(pdev, brdp);
return 0;
+err_fr:
+ kfree(brdp);
+err:
+ return retval;
}
-/*****************************************************************************/
+static void stli_pciremove(struct pci_dev *pdev)
+{
+ stlibrd_t *brdp = pci_get_drvdata(pdev);
-/*
- * Find all Stallion PCI boards that might be installed. Initialize each
- * one as it is found.
- */
+ stli_cleanup_ports(brdp);
-static int stli_findpcibrds(void)
-{
- struct pci_dev *dev = NULL;
+ iounmap(brdp->membase);
+ if (brdp->iosize > 0)
+ release_region(brdp->iobase, brdp->iosize);
- while ((dev = pci_get_device(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA, dev))) {
- stli_initpcibrd(BRD_ECPPCI, dev);
- }
- return 0;
+ stli_brds[brdp->brdnr] = NULL;
+ kfree(brdp);
}
-#endif
-
+static struct pci_driver stli_pcidriver = {
+ .name = "istallion",
+ .id_table = istallion_pci_tbl,
+ .probe = stli_pciprobe,
+ .remove = __devexit_p(stli_pciremove)
+};
/*****************************************************************************/
/*
@@ -4102,7 +4120,7 @@ static int stli_initbrds(void)
{
stlibrd_t *brdp, *nxtbrdp;
stlconf_t *confp;
- int i, j;
+ int i, j, retval;
if (stli_nrbrds > STL_MAXBRDS) {
printk(KERN_INFO "STALLION: too many boards in configuration "
@@ -4134,9 +4152,9 @@ static int stli_initbrds(void)
stli_argbrds();
if (STLI_EISAPROBE)
stli_findeisabrds();
-#ifdef CONFIG_PCI
- stli_findpcibrds();
-#endif
+
+ retval = pci_register_driver(&stli_pcidriver);
+ /* TODO: check retval and do something */
/*
* All found boards are initialized. Now for a little optimization, if
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
