> Jeff Garzik wrote:
>
> Promise has given me permission to post hardware programming info
> for one of their chips (Linux driver: sata_promise), PDC20319.
> This also marks the first open chipset for Promise (AFAIK), so
> let's give them a round of applause.
>
>
> I missed an email from Promise which supplied even more chipset docs
> to open. Whoops. The entire line supported by sata_promise.c should
> now be open:
I use the following Promise Card : (lspci output):
02:06.0 Mass storage controller: Promise Technology, Inc. PDC20718 (SATA
300 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20718 (SATA 300 TX4)
Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 185
I/O ports at bc00 [size=128]
I/O ports at b800 [size=256]
Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at fdd80000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
lspci -vvn:
02:06.0 Class 0180: 105a:3d17 (rev 02)
Subsystem: 105a:3d17
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size 01
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at bc00 [size=128]
Region 2: I/O ports at b800 [size=256]
Region 3: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at fdd80000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Dmesg:
<7>sata_promise 0000:02:06.0: version 1.04
<4>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
<6>GSI 17 sharing vector 0xB9 and IRQ 17
<6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 185
<6>ata5: SATA max UDMA/133 cmd 0xFFFFC20000022200 ctl 0xFFFFC20000022238
bmdma 0x0 irq 185
<6>ata6: SATA max UDMA/133 cmd 0xFFFFC20000022280 ctl 0xFFFFC200000222B8
bmdma 0x0 irq 185
<6>ata7: SATA max UDMA/133 cmd 0xFFFFC20000022300 ctl 0xFFFFC20000022338
bmdma 0x0 irq 185
<6>ata8: SATA max UDMA/133 cmd 0xFFFFC20000022380 ctl 0xFFFFC200000223B8
bmdma 0x0 irq 185
<6>scsi4 : sata_promise
<6>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata5.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
<6>ata5.00: configured for UDMA/133
In which controller classes does it belong?
Promise claims it should have NCQ how to enable ?
Best regards
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
