Yes, It is still working.
Syed Azam
System Software Engineer
Hewlett-Packard Company
-----Original Message-----
From: Darren Salt [mailto:[email protected]]
Sent: Wednesday, November 01, 2006 1:01 PM
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected];
[email protected]; [email protected]; [email protected];
[email protected]; Azam, Syed S; [email protected]
Subject: Re: r8169 mac address change (was Re: [0/3] 2.6.19-rc2: known
regressions)
This message is in MIME format which your mailer apparently does not
support.
You either require a newer version of your software which supports MIME,
or
a separate MIME decoding utility. Alternatively, ask the sender of this
message to resend it in a different format.
--163681386--1739281754--1718250983
Content-Type: text/plain; charset=us-ascii
I demand that Francois Romieu may or may not have written...
[snip]
> o Darren and Syed, are your 0x8136 still happy with the patch
>
0001-r8169-perform-a-PHY-reset-before-any-other-operation-at-boot-time.t
xt
> at http://www.fr.zoreil.com/linux/kernel/2.6.x/2.6.19-rc4/r8169
> on top of 2.6.19-rc4 ?
It is.
I then tried 0002-r8169-more-magic.txt, mainly to see that it doesn't
cause
any problems. Unfortunately, it did... however, a little reading showed
that
you've stopped enabling transmit and receive for all but four of the
chip
types supported by the driver.
An incremental fix is attached.
> o Darren, still ok to keep your S-o-b in it ?
Yes.
[snip]
--
| Darren Salt | linux or ds at | nr. Ashington, | Toon
| RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army
| + Buy less and make it last longer. INDUSTRY CAUSES GLOBAL
WARMING.
Never have a drink when you are feeling sorry for yourself.
--163681386--1739281754--1718250983
Content-Type: text/plain; charset=iso-8859-1;
name="0003-r8169-fix-more-magic.patch"
Content-Disposition: attachment;
filename="0003-r8169-fix-more-magic.patch"
r8169: fix more magic so that 8101e etc. work again
r8169-more-magic killed transmit & receive on my laptop's RTL8101e.
Turns out
to be that the enabling of these functions had been unitnentionally
removed.
(This is one of two possible fixes, the other being the removal of the
if()
guarding the other tx/rx-enable call. Both work here.)
Signed-off-by: Darren Salt <[email protected]>
--- drivers/net/r8169.c~ 2006-11-01 19:53:02.000000000 +0000
+++ drivers/net/r8169.c 2006-11-01 19:54:16.000000000 +0000
@@ -1921,7 +1921,10 @@
(tp->mac_version != RTL_GIGA_MAC_VER_02) &&
(tp->mac_version != RTL_GIGA_MAC_VER_03) &&
(tp->mac_version != RTL_GIGA_MAC_VER_04))
+ {
rtl8169_set_rx_tx_config_registers(tp);
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ }
RTL_W8(Cfg9346, Cfg9346_Lock);
--163681386--1739281754--1718250983--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
