Re: [airo.c bug] Couldn't allocate RX FID / Max tries exceeded when issueing command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/2/06, Dan Williams <[email protected]> wrote:
It appears that the driver cannot talk to your card; see the "max tries
exceeded when issueing command".  Did this card work previously with a
kernel?  Can narrow down which kernels have problems and which don't?

It spontaneously stopped working about a week after I bought the
laptop and installed Linux. I tried kernel 2.6.12 and it had the same
problem. (Let me know if you'd like me to try a specific version.)

I'm hoping that the card has simply got itself into some kind of
invalid state, and not failed altogether.

It's a bit hard to figure out what firmware you have because the driver
can't talk to the card; can you boot under Windows and determine that
using the Cisco wireless utility?  You also need to flash the card under
Windows, not Linux, ideally to a version of firmware greater than
5.60.08.

I haven't run Windows in many years, so that's problematic. What's the
most straightforward way to boot into a Windows environment sufficient
to run the Cisco wireless utility?

reloading the driver (rmmod airo; modprobe airo) should reset the card.

Yeah, it unfortunately doesn't help. (Nor does rebooting or resetting
the bios.) I noticed a suspiciously relevant commit in the airo.c git
log:

   [wireless airo] reset card in init

   without this patch after an rmmod, modprobe the card won't work anymore
   until the next reboot.

   This patch seem safe to apply for all cards as the bsd driver already do
   that.

   I had to add a timeout because strange things happen (issuecommand will
   fail) if the card is already reseted (after a reboot).

   PS : it seems there are missing reset when leaving monitor mode...

   Signed-off-by: Matthieu CASTET <[email protected]>

and that makes me wonder if there might be some kind of subtle bug in
the card initialization sequence that manifests itself with my
particular card/firmware.

I think I'll burn a freebsd livecd today and see if their kernel works.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux