PCI card not detected on Intel 845G chipset

Hi there,

please remind me if this is the wrong list.

I recently installed 2.6.16 on a compaq evo PC running Intel 845G chipset. Kernel finds all major system devices (USB, VGA, etc) but fails to find the installed Netgear WG311T card in the PCI slot.
lspci doesn't even show this card.

I tried all combinations of acpi=off, noapic, pci=routeirq without success.
No error messages concerning the PCI bus appear in dmesg.
The only weird thing is, that lspci shows this device:
Unknown non-vga adapter
with the ID 0200:7008

I have not found any information about this device nor do I have any idea what this could be.
The Netgear card should start with 168c:0013

Please CC me on any replies.

Thank you,
Ronny

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

---

• Follow-Ups:
  • Re: PCI card not detected on Intel 845G chipset
    • From: "John Stoffel" <[email protected]>

• Prev by Date: Re: [take22 0/4] kevent: Generic event handling mechanism.
• Next by Date: Re: CONFIG_NO_HZ: missed ticks, stall (keyb IRQ required) [2.6.18-rc4-mm1]
• Previous by thread: 2.6.19-rc4-mm2
• Next by thread: Re: PCI card not detected on Intel 845G chipset
• Index(es):
  • Date
  • Thread

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]