Re: fc6 kernel 2.6.18-1.2798 breaks acpi on HP laptop n5430

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dave Jones wrote:

On Wed, Nov 01, 2006 at 04:17:50PM -0500, Stephen Clark wrote:

> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>  BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
>  BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data)
>  BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
>  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
> Using x86 segment limits to approximate NX protection
> DMI 2.2 present.
> Using APIC driver default
> ACPI: PM-Timer IO Port: 0x8008
> Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
> Detected 850.075 MHz processor.
> Built 1 zonelists.  Total pages: 131056
> Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic nousb > console=ttyS0,38400
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!

Does it make a difference if you boot with nolapic ?

	Dave

Hi Dave,

booting without lapic allowed it to boot but now I get
...
Local APIC disabled by BIOS -- you can enable it with "lapic"
...
Local APIC not detected. Using dummy APIC emulation.
 which means more processor overhead - right?

also cpuspeed doesn't work anymore - I don't have a cpufreq dir

I don't get the following messages with kernel 2798
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Nov  1 19:33:34 joker4 kernel: powernow: SGTC: 10000
Nov 1 19:33:34 joker4 kernel: powernow: Minimum speed 300 MHz. Maximum speed 850 M
Hz.
Nov 1 19:33:34 joker4 kernel: powernow-k8: Processor cpuid 670 not supported

Steve



--

"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin)

"The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux