Andrew, here it is a small update for the
drivers-add-lcd-support patch at -mm2. Please apply.
Franck Bui-Huu, thanks for pointing out the lack of mmaping support.
---
- Adds mmaping support for the cfag12864bfb.
- Exchange the wiring drawing URL to a local ASCII drawing
at Documentation/auxdisplay/cfag12864b.
Documentation/auxdisplay/cfag12864b | 37 +++++++++++++++++++++-----
drivers/auxdisplay/Kconfig | 7 ----
drivers/auxdisplay/cfag12864b.c | 22 +++++++++------
drivers/auxdisplay/cfag12864bfb.c | 37 +++++++++++++++++++++++---
4 files changed, 80 insertions(+), 23 deletions(-)
miguelojeda-2.6.19-rc1-drivers-add-LCD-support-4-mmaping-and-ascii-drawing.patch
Signed-off-by: Miguel Ojeda Sandonis <[email protected]>
---
diff -uprN -X dontdiff linux-2.6.19-rc1-modified/Documentation/auxdisplay/cfag12864b linux/Documentation/auxdisplay/cfag12864b
--- linux-2.6.19-rc1-modified/Documentation/auxdisplay/cfag12864b 2006-10-26 16:57:38.000000000 +0000
+++ linux/Documentation/auxdisplay/cfag12864b 2006-10-26 16:38:54.000000000 +0000
@@ -4,7 +4,7 @@
License: GPLv2
Author & Maintainer: Miguel Ojeda Sandonis <[email protected]>
-Date: 2006-10-11
+Date: 2006-10-26
@@ -51,12 +51,37 @@ Addresses: 64 each page
The cfag12864b LCD Series don't have official wiring.
-The common wiring is done to the parallel port:
-
-http://www.skippari.net/lcd/sekalaista/crystalfontz_cfag12864B-TMI-V.png
-
-You can get help at Crystalfontz and LCDInfo forums.
+The common wiring is done to the parallel port as shown:
+Parallel Port cfag12864b
+
+ Name Pin# Pin# Name
+
+Strobe ( 1)------------------------------(17) Enable
+Data 0 ( 2)------------------------------( 4) Data 0
+Data 1 ( 3)------------------------------( 5) Data 1
+Data 2 ( 4)------------------------------( 6) Data 2
+Data 3 ( 5)------------------------------( 7) Data 3
+Data 4 ( 6)------------------------------( 8) Data 4
+Data 5 ( 7)------------------------------( 9) Data 5
+Data 6 ( 8)------------------------------(10) Data 6
+Data 7 ( 9)------------------------------(11) Data 7
+ (10) [+5v]---( 1) Vdd
+ (11) [GND]---( 2) Ground
+ (12) [+5v]---(14) Reset
+ (13) [GND]---(15) Read / Write
+ Line (14)------------------------------(13) Controller Select 1
+ (15)
+ Init (16)------------------------------(12) Controller Select 2
+Select (17)------------------------------(16) Data / Instruction
+Ground (18)---[GND] [+5v]---(19) LED +
+Ground (19)---[GND]
+Ground (20)---[GND] E A Values:
+Ground (21)---[GND] [GND]---[P1]---(18) Vee · R = Resistor = 22 ohm
+Ground (22)---[GND] | · P1 = Preset = 10 Kohm
+Ground (23)---[GND] ---- S ------( 3) V0 · P2 = Preset = 1 Kohm
+Ground (24)---[GND] | |
+Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -
------------------------
diff -uprN -X dontdiff linux-2.6.19-rc1-modified/drivers/auxdisplay/cfag12864b.c linux/drivers/auxdisplay/cfag12864b.c
--- linux-2.6.19-rc1-modified/drivers/auxdisplay/cfag12864b.c 2006-10-26 16:57:38.000000000 +0000
+++ linux/drivers/auxdisplay/cfag12864b.c 2006-10-26 16:48:36.000000000 +0000
@@ -6,7 +6,7 @@
* Depends: ks0108
*
* Author: Copyright (C) Miguel Ojeda Sandonis <[email protected]>
- * Date: 2006-10-13
+ * Date: 2006-10-26
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -182,7 +182,7 @@ static void cfag12864b_nop(void)
* cfag12864b Internal Commands
*/
-unsigned char *cfag12864b_cache;
+static unsigned char *cfag12864b_cache;
unsigned char *cfag12864b_buffer;
EXPORT_SYMBOL_GPL(cfag12864b_buffer);
@@ -264,12 +264,18 @@ static int __init cfag12864b_init(void)
{
int ret = -EINVAL;
- cfag12864b_buffer = vmalloc(sizeof(unsigned char) *
- CFAG12864B_SIZE);
+ if(PAGE_SIZE < CFAG12864B_SIZE) {
+ printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
+ "page size (%i) < cfag12864b size (%i)\n",
+ (unsigned int)PAGE_SIZE, CFAG12864B_SIZE);
+ ret = -ENOMEM;
+ goto none;
+ }
+
+ cfag12864b_buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
if (cfag12864b_buffer == NULL) {
printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
- "can't v-alloc buffer (%i bytes)\n",
- CFAG12864B_SIZE);
+ "can't get a free page\n");
ret = -ENOMEM;
goto none;
}
@@ -302,7 +308,7 @@ cachealloced:
kfree(cfag12864b_cache);
bufferalloced:
- vfree(cfag12864b_buffer);
+ free_page((unsigned long) cfag12864b_buffer);
none:
return ret;
@@ -317,7 +323,7 @@ static void __exit cfag12864b_exit(void)
cfag12864b_off();
kfree(cfag12864b_cache);
- vfree(cfag12864b_buffer);
+ free_page((unsigned long) cfag12864b_buffer);
}
module_init(cfag12864b_init);
diff -uprN -X dontdiff linux-2.6.19-rc1-modified/drivers/auxdisplay/cfag12864bfb.c linux/drivers/auxdisplay/cfag12864bfb.c
--- linux-2.6.19-rc1-modified/drivers/auxdisplay/cfag12864bfb.c 2006-10-26 16:57:38.000000000 +0000
+++ linux/drivers/auxdisplay/cfag12864bfb.c 2006-10-26 16:22:42.000000000 +0000
@@ -6,7 +6,7 @@
* Depends: cfag12864b
*
* Author: Copyright (C) Miguel Ojeda Sandonis <[email protected]>
- * Date: 2006-10-13
+ * Date: 2006-10-26
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -35,12 +35,13 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/cfag12864b.h>
+#include <asm/semaphore.h>
#include <asm/uaccess.h>
#define CFAG12864BFB_NAME "cfag12864bfb"
static struct fb_fix_screeninfo cfag12864bfb_fix __initdata = {
- .id = "cfag12864b",
+ .id = "cfag12864b",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_MONO10,
.xpanstep = 0,
@@ -66,11 +67,41 @@ static struct fb_var_screeninfo cfag1286
.vmode = FB_VMODE_NONINTERLACED,
};
+DECLARE_MUTEX(cfag12864bfb_sem);
+
+struct page *cfag12864bfb_vma_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ struct page *page;
+ down(&cfag12864bfb_sem);
+
+ page = virt_to_page(cfag12864b_buffer);
+ get_page(page);
+
+ if(type)
+ *type = VM_FAULT_MINOR;
+
+ up(&cfag12864bfb_sem);
+ return page;
+}
+
+static struct vm_operations_struct cfag12864bfb_vm_ops = {
+ .nopage = cfag12864bfb_vma_nopage,
+};
+
+static int cfag12864bfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ vma->vm_ops = &cfag12864bfb_vm_ops;
+ vma->vm_flags |= VM_RESERVED;
+ return 0;
+}
+
static struct fb_ops cfag12864bfb_ops = {
.owner = THIS_MODULE,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
+ .fb_mmap = cfag12864bfb_mmap,
};
static int __init cfag12864bfb_probe(struct platform_device *device)
@@ -81,7 +112,7 @@ static int __init cfag12864bfb_probe(str
if (!info)
goto none;
- info->screen_base = (char __iomem *)cfag12864b_buffer;
+ info->screen_base = (char __iomem *) cfag12864b_buffer;
info->screen_size = CFAG12864B_SIZE;
info->fbops = &cfag12864bfb_ops;
info->fix = cfag12864bfb_fix;
diff -uprN -X dontdiff linux-2.6.19-rc1-modified/drivers/auxdisplay/Kconfig linux/drivers/auxdisplay/Kconfig
--- linux-2.6.19-rc1-modified/drivers/auxdisplay/Kconfig 2006-10-26 17:01:26.000000000 +0000
+++ linux/drivers/auxdisplay/Kconfig 2006-10-26 17:39:57.000000000 +0000
@@ -71,12 +71,7 @@ config CFAG12864B
say Y. You also need the ks0108 LCD Controller driver.
For help about how to wire your LCD to the parallel port,
- check this image:
-
- http://www.skippari.net/lcd/sekalaista/crystalfontz_cfag12864B-TMI-V.png
-
- Also, you can find help in Crystalfontz and LCDStudio forums.
- Check Documentation/lcddisplay/cfag12864b for more information.
+ check Documentation/auxdisplay/cfag12864b
The LCD framebuffer driver can be attached to a console.
It will work fine. However, you can't attach it to the fbdev driver
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
