Re: SATA300 TX4 + WD2500KS = status=0x50 { DriveReady SeekComplete }

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello, Gregory!

Gregory Brauer wrote:

I have a new Promise SATA300 TX4 4-port SATA controller
to which I have attached two older WD2500JD hard drives
and two brand new WD2500KS hard drives.  The older drives
seem to work fine, but both of the brand new hard drives
trigger the following errors every few seconds during
i/o:

Oct 25 13:57:18 gleep kernel: ata3: no sense translation for status: 0x50
Oct 25 13:57:18 gleep kernel: ata3: translated ATA stat/err 0x50/00 to SCSI SK/ASC/ASCQ 0xb/00/00
[...]
00:0b.0 Mass storage controller: Promise Technology, Inc. PDC20718 (SATA 300 TX4) (rev 02)

Hummm... Well, first, can you try another kernel?
Second, the same chip on a board from a different manufacturer.
I am a hardware engineer working with the Promise PDC20775.
SATA Chips are pretty sensitive to bad board layout, coming up
with strange errors. :-/

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux