[PATCH 1/2] !CONFIG_NET_ETHERNET unsets CONFIG_PHYLIB, but CONFIG_USB_USBNET also needs CONFIG_PHYLIB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 25 Oct 2006 15:27:09 -0700 David Brownell wrote:

> The other parts are right, this isn't.
> 
> Instead, "usbnet.c" should #ifdef the relevant ethtool hooks
> according to CONFIG_MII ... since it's completely legit to
> use usbnet with peripherals that don't need MII.

Ugh.  OK.  How's this?  (2 patches)

(oh, OP mentioned CONFIG_PHYLIB but it's actually CONFIG_MII AFAIK)

---
From: Randy Dunlap <[email protected]>

pegasus and mcs7830 drivers use MII interfaces and should
select MII in the same way that drivers/net/ drivers do.

However, the MII config symbol should not be in the 10/100 Ethernet
menu, so that other drivers can use (enable) it or so that users
can enable it without needing to enable 10/100 Ethernet.

Signed-off-by: Randy Dunlap <[email protected]>
---
 drivers/net/Kconfig     |   15 +++++++--------
 drivers/usb/net/Kconfig |    2 ++
 2 files changed, 9 insertions(+), 8 deletions(-)

--- linux-2619-rc3-pv.orig/drivers/usb/net/Kconfig
+++ linux-2619-rc3-pv/drivers/usb/net/Kconfig
@@ -84,6 +84,7 @@ config USB_PEGASUS
 config USB_RTL8150
 	tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select MII
 	help
 	  Say Y here if you have RTL8150 based usb-ethernet adapter.
 	  Send me <[email protected]> any comments you may have.
@@ -210,6 +211,7 @@ config USB_NET_PLUSB
 config USB_NET_MCS7830
 	tristate "MosChip MCS7830 based Ethernet adapters"
 	depends on USB_USBNET
+	select MII
 	help
 	  Choose this option if you're using a 10/100 Ethernet USB2
 	  adapter based on the MosChip 7830 controller. This includes
--- linux-2619-rc3-pv.orig/drivers/net/Kconfig
+++ linux-2619-rc3-pv/drivers/net/Kconfig
@@ -145,6 +145,13 @@ config NET_SB1000
 
 source "drivers/net/arcnet/Kconfig"
 
+config MII
+	tristate "Generic Media Independent Interface device support"
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lacks MII.
+
 source "drivers/net/phy/Kconfig"
 
 #
@@ -180,14 +187,6 @@ config NET_ETHERNET
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about Ethernet network cards. If unsure, say N.
 
-config MII
-	tristate "Generic Media Independent Interface device support"
-	depends on NET_ETHERNET
-	help
-	  Most ethernet controllers have MII transceiver either as an external
-	  or internal device.  It is safe to say Y or M here even if your
-	  ethernet card lack MII.
-
 source "drivers/net/arm/Kconfig"
 
 config MACE
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux