Make swsusp support i386 systems with PAE or without PSE.
This is done by creating temporary page tables located in resume-safe
page frames before the suspend image is restored in the same way
as x86_64 does it.
Signed-off-by: Rafael J. Wysocki <[email protected]>
---
arch/i386/power/Makefile | 2
arch/i386/power/suspend.c | 158 +++++++++++++++++++++++++++++++++++++++++++++
arch/i386/power/swsusp.S | 9 +-
include/asm-i386/suspend.h | 13 ---
kernel/power/Kconfig | 2
5 files changed, 168 insertions(+), 16 deletions(-)
Index: linux-2.6.19-rc2-mm2/arch/i386/power/swsusp.S
===================================================================
--- linux-2.6.19-rc2-mm2.orig/arch/i386/power/swsusp.S
+++ linux-2.6.19-rc2-mm2/arch/i386/power/swsusp.S
@@ -28,8 +28,9 @@ ENTRY(swsusp_arch_suspend)
call swsusp_save
ret
-ENTRY(swsusp_arch_resume)
- movl $swsusp_pg_dir-__PAGE_OFFSET, %ecx
+ENTRY(restore_image)
+ movl resume_pg_dir, %ecx
+ subl $__PAGE_OFFSET, %ecx
movl %ecx, %cr3
movl restore_pblist, %edx
@@ -51,6 +52,10 @@ copy_loop:
.p2align 4,,7
done:
+ /* go back to the original page tables */
+ movl $swapper_pg_dir, %ecx
+ subl $__PAGE_OFFSET, %ecx
+ movl %ecx, %cr3
/* Flush TLB, including "global" things (vmalloc) */
movl mmu_cr4_features, %eax
movl %eax, %edx
Index: linux-2.6.19-rc2-mm2/arch/i386/power/suspend.c
===================================================================
--- /dev/null
+++ linux-2.6.19-rc2-mm2/arch/i386/power/suspend.c
@@ -0,0 +1,158 @@
+/*
+ * Suspend support specific for i386 - temporary page tables
+ *
+ * Distribute under GPLv2
+ *
+ * Copyright (c) 2006 Rafael J. Wysocki <[email protected]>
+ */
+
+#include <linux/suspend.h>
+#include <linux/bootmem.h>
+
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* Defined in arch/i386/power/swsusp.S */
+extern int restore_image(void);
+
+/* Pointer to the temporary resume page tables */
+pgd_t *resume_pg_dir;
+
+/* The following three functions are based on the analogous code in
+ * arch/i386/mm/init.c
+ */
+
+/*
+ * Create a middle page table on a resume-safe page and put a pointer to it in
+ * the given global directory entry. This only returns the gd entry
+ * in non-PAE compilation mode, since the middle layer is folded.
+ */
+static pmd_t *resume_one_md_table_init(pgd_t *pgd)
+{
+ pud_t *pud;
+ pmd_t *pmd_table;
+
+#ifdef CONFIG_X86_PAE
+ pmd_table = (pmd_t *)get_safe_page(GFP_ATOMIC);
+ if (!pmd_table)
+ return NULL;
+
+ set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
+ pud = pud_offset(pgd, 0);
+
+ BUG_ON(pmd_table != pmd_offset(pud, 0));
+#else
+ pud = pud_offset(pgd, 0);
+ pmd_table = pmd_offset(pud, 0);
+#endif
+
+ return pmd_table;
+}
+
+/*
+ * Create a page table on a resume-safe page and place a pointer to it in
+ * a middle page directory entry.
+ */
+static pte_t *resume_one_page_table_init(pmd_t *pmd)
+{
+ if (pmd_none(*pmd)) {
+ pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC);
+ if (!page_table)
+ return NULL;
+
+ set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE));
+
+ BUG_ON(page_table != pte_offset_kernel(pmd, 0));
+
+ return page_table;
+ }
+
+ return pte_offset_kernel(pmd, 0);
+}
+
+/*
+ * This maps the physical memory to kernel virtual address space, a total
+ * of max_low_pfn pages, by creating page tables starting from address
+ * PAGE_OFFSET. The page tables are allocated out of resume-safe pages.
+ */
+static int resume_physical_mapping_init(pgd_t *pgd_base)
+{
+ unsigned long pfn;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int pgd_idx, pmd_idx;
+
+ pgd_idx = pgd_index(PAGE_OFFSET);
+ pgd = pgd_base + pgd_idx;
+ pfn = 0;
+
+ for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
+ pmd = resume_one_md_table_init(pgd);
+ if (!pmd)
+ return -ENOMEM;
+
+ if (pfn >= max_low_pfn)
+ continue;
+
+ for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) {
+ if (pfn >= max_low_pfn)
+ break;
+
+ /* Map with big pages if possible, otherwise create
+ * normal page tables.
+ * NOTE: We can mark everything as executable here
+ */
+ if (cpu_has_pse) {
+ set_pmd(pmd, pfn_pmd(pfn, PAGE_KERNEL_LARGE_EXEC));
+ pfn += PTRS_PER_PTE;
+ } else {
+ pte_t *max_pte;
+
+ pte = resume_one_page_table_init(pmd);
+ if (!pte)
+ return -ENOMEM;
+
+ max_pte = pte + PTRS_PER_PTE;
+ for (; pte < max_pte; pte++, pfn++) {
+ if (pfn >= max_low_pfn)
+ break;
+
+ set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
+{
+#ifdef CONFIG_X86_PAE
+ int i;
+
+ /* Init entries of the first-level page table to the zero page */
+ for (i = 0; i < PTRS_PER_PGD; i++)
+ set_pgd(pg_dir + i,
+ __pgd(__pa(empty_zero_page) | _PAGE_PRESENT));
+#endif
+}
+
+int swsusp_arch_resume(void)
+{
+ int error;
+
+ resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
+ if (!resume_pg_dir)
+ return -ENOMEM;
+
+ resume_init_first_level_page_table(resume_pg_dir);
+ error = resume_physical_mapping_init(resume_pg_dir);
+ if (error)
+ return error;
+
+ /* We have got enough memory and from now on we cannot recover */
+ restore_image();
+ return 0;
+}
Index: linux-2.6.19-rc2-mm2/arch/i386/power/Makefile
===================================================================
--- linux-2.6.19-rc2-mm2.orig/arch/i386/power/Makefile
+++ linux-2.6.19-rc2-mm2/arch/i386/power/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_PM) += cpu.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
+obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o suspend.o
Index: linux-2.6.19-rc2-mm2/kernel/power/Kconfig
===================================================================
--- linux-2.6.19-rc2-mm2.orig/kernel/power/Kconfig
+++ linux-2.6.19-rc2-mm2/kernel/power/Kconfig
@@ -78,7 +78,7 @@ config PM_SYSFS_DEPRECATED
config SOFTWARE_SUSPEND
bool "Software Suspend"
- depends on PM && SWAP && ((X86 && (!SMP || SUSPEND_SMP) && !X86_PAE) || ((FRV || PPC32) && !SMP))
+ depends on PM && SWAP && ((X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP))
---help---
Enable the possibility of suspending the machine.
It doesn't need ACPI or APM.
Index: linux-2.6.19-rc2-mm2/include/asm-i386/suspend.h
===================================================================
--- linux-2.6.19-rc2-mm2.orig/include/asm-i386/suspend.h
+++ linux-2.6.19-rc2-mm2/include/asm-i386/suspend.h
@@ -6,18 +6,7 @@
#include <asm/desc.h>
#include <asm/i387.h>
-static inline int
-arch_prepare_suspend(void)
-{
- /* If you want to make non-PSE machine work, turn off paging
- in swsusp_arch_suspend. swsusp_pg_dir should have identity mapping, so
- it could work... */
- if (!cpu_has_pse) {
- printk(KERN_ERR "PSE is required for swsusp.\n");
- return -EPERM;
- }
- return 0;
-}
+static inline int arch_prepare_suspend(void) { return 0; }
/* image of the saved processor state */
struct saved_context {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]