On Wed, 2006-10-18 at 09:34 -0400, Lennart Sorensen wrote:
> I suspect all you have to do might be to change how many ports it looks
> for. The default max ports is 4 I believe on many kernel versions.
>
> Look for CONFIG_SERIAL_8250_NR_UARTS and
> CONFIG_SERIAL_8250_RUNTIME_UARTS in the kernel config.
>
> If that doesn't work and you do need a special driver, at least label it
> with more detail like 'for exar st16c554 quad uart' or 'for envoy board'
> or whatever makes it clear which hardware it is for. I use exar pci
> uarts (exar XR17d15[248] chips) which work fine already with the 8250
> driver, or optionally with the jsm driver with a small change to the
> list if pci identifiers. THey of course would not work with your driver
> since they are completely different exar chips (even though one is also
> a quad uart, although 64byte fifo).
Okay.. Here it is again with a little more detail:
----------------------------------------------------
diff -urN linux-2.6.19-rc2.orig/drivers/serial/8250_exar_st16c554.c linux-2.6.19-rc2/drivers/serial/8250_exar_st16c554.c
--- linux-2.6.19-rc2.orig/drivers/serial/8250_exar_st16c554.c 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.19-rc2/drivers/serial/8250_exar_st16c554.c 2006-10-22 14:58:55.000000000 -0500
@@ -0,0 +1,52 @@
+/*
+ * linux/drivers/serial/8250_exar.c
+ *
+ * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com >
+ * Based on 8250_boca.
+ *
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port exar_data[] = {
+ PORT(0x100, 5),
+ PORT(0x108, 5),
+ PORT(0x110, 5),
+ PORT(0x118, 5),
+ { },
+};
+
+static struct platform_device exar_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_EXAR,
+ .dev = {
+ .platform_data = exar_data,
+ },
+};
+
+static int __init exar_init(void)
+{
+ return platform_device_register(&exar_device);
+}
+
+module_init(exar_init);
+
+MODULE_AUTHOR("Paul B Schroeder");
+MODULE_DESCRIPTION("8250 serial probe module for Exar cards");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.19-rc2.orig/drivers/serial/Kconfig linux-2.6.19-rc2/drivers/serial/Kconfig
--- linux-2.6.19-rc2.orig/drivers/serial/Kconfig 2006-10-13 11:25:04.000000000 -0500
+++ linux-2.6.19-rc2/drivers/serial/Kconfig 2006-10-22 15:13:03.000000000 -0500
@@ -210,6 +210,17 @@
To compile this driver as a module, choose M here: the module
will be called 8250_boca.
+config SERIAL_8250_EXAR_ST16C554
+ tristate "Support Exar ST16C554/554D Quad UART"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
+ tinkering with your Envoy TU301, or have a machine with this UART,
+ say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_exar_st16c554.
+
config SERIAL_8250_HUB6
tristate "Support Hub6 cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
diff -urN linux-2.6.19-rc2.orig/drivers/serial/Makefile linux-2.6.19-rc2/drivers/serial/Makefile
--- linux-2.6.19-rc2.orig/drivers/serial/Makefile 2006-10-13 11:25:04.000000000 -0500
+++ linux-2.6.19-rc2/drivers/serial/Makefile 2006-10-22 15:14:11.000000000 -0500
@@ -17,6 +17,7 @@
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
+obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
diff -urN linux-2.6.19-rc2.orig/include/linux/serial_8250.h linux-2.6.19-rc2/include/linux/serial_8250.h
--- linux-2.6.19-rc2.orig/include/linux/serial_8250.h 2006-10-13 11:25:04.000000000 -0500
+++ linux-2.6.19-rc2/include/linux/serial_8250.h 2006-10-22 15:15:15.000000000 -0500
@@ -41,6 +41,7 @@
PLAT8250_DEV_FOURPORT,
PLAT8250_DEV_ACCENT,
PLAT8250_DEV_BOCA,
+ PLAT8250_DEV_EXAR_ST16C554,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_MCA,
PLAT8250_DEV_AU1X00,
----------------------------------------------------
Cheers...Paul...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
