The existing implementation of pci_block_user_cfg_access() was recently
criticised for providing out of date information and for returning errors
on write, which applications won't be expecting.
This reimplementation uses a global wait queue and a bit per device.
I've open-coded prepare_to_wait() / finish_wait() as I could optimise
it significantly by knowing that the pci_lock protected us at all points.
It looked a bit funny to be doing a spin_unlock_irqsave(); schedule(),
so I used spin_lock_irq() for the _user versions of pci_read_config and
pci_write_config. Not carrying a flags pointer around made the code
much less nasty.
Attempts to block an already blocked device hit a BUG() and attempts to
unblock an already unblocked device hit a WARN(). If we need to block
access to a device from userspace, it's because it's unsafe for even
another bit of the kernel to access the device. An attempt to block
a device for a second time means we're about to access the device to
perform some other operation, which could provoke undefined behaviour
from the device.
Signed-off-by: Matthew Wilcox <[email protected]>
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ea16805..73a58c7 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -1,6 +1,7 @@
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/wait.h>
#include "pci.h"
@@ -63,30 +64,42 @@ EXPORT_SYMBOL(pci_bus_write_config_byte)
EXPORT_SYMBOL(pci_bus_write_config_word);
EXPORT_SYMBOL(pci_bus_write_config_dword);
-static u32 pci_user_cached_config(struct pci_dev *dev, int pos)
-{
- u32 data;
+/*
+ * The following routines are to prevent the user from accessing PCI config
+ * space when it's unsafe to do so. Some devices require this during BIST and
+ * we're required to prevent it during D-state transitions.
+ *
+ * We have a bit per device to indicate it's blocked and a global wait queue
+ * for callers to sleep on until devices are unblocked.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
- data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])];
- data >>= (pos % sizeof(dev->saved_config_space[0])) * 8;
- return data;
+static noinline void pci_wait_ucfg(struct pci_dev *dev)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ __add_wait_queue(&pci_ucfg_wait, &wait);
+ do {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ spin_unlock_irq(&pci_lock);
+ schedule();
+ spin_lock_irq(&pci_lock);
+ } while (dev->block_ucfg_access);
+ __remove_wait_queue(&pci_ucfg_wait, &wait);
}
#define PCI_USER_READ_CONFIG(size,type) \
int pci_user_read_config_##size \
(struct pci_dev *dev, int pos, type *val) \
{ \
- unsigned long flags; \
int ret = 0; \
u32 data = -1; \
if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
- spin_lock_irqsave(&pci_lock, flags); \
- if (likely(!dev->block_ucfg_access)) \
- ret = dev->bus->ops->read(dev->bus, dev->devfn, \
+ spin_lock_irq(&pci_lock); \
+ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
+ ret = dev->bus->ops->read(dev->bus, dev->devfn, \
pos, sizeof(type), &data); \
- else if (pos < sizeof(dev->saved_config_space)) \
- data = pci_user_cached_config(dev, pos); \
- spin_unlock_irqrestore(&pci_lock, flags); \
+ spin_unlock_irq(&pci_lock); \
*val = (type)data; \
return ret; \
}
@@ -95,14 +108,13 @@ #define PCI_USER_WRITE_CONFIG(size,type)
int pci_user_write_config_##size \
(struct pci_dev *dev, int pos, type val) \
{ \
- unsigned long flags; \
int ret = -EIO; \
if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
- spin_lock_irqsave(&pci_lock, flags); \
- if (likely(!dev->block_ucfg_access)) \
- ret = dev->bus->ops->write(dev->bus, dev->devfn, \
+ spin_lock_irq(&pci_lock); \
+ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
+ ret = dev->bus->ops->write(dev->bus, dev->devfn, \
pos, sizeof(type), val); \
- spin_unlock_irqrestore(&pci_lock, flags); \
+ spin_unlock_irq(&pci_lock); \
return ret; \
}
@@ -117,21 +129,23 @@ PCI_USER_WRITE_CONFIG(dword, u32)
* pci_block_user_cfg_access - Block userspace PCI config reads/writes
* @dev: pci device struct
*
- * This function blocks any userspace PCI config accesses from occurring.
- * When blocked, any writes will be bit bucketed and reads will return the
- * data saved using pci_save_state for the first 64 bytes of config
- * space and return 0xff for all other config reads.
- **/
+ * When user access is blocked, any reads or writes to config space will
+ * sleep until access is unblocked again. We don't allow nesting of
+ * block/unblock calls.
+ */
void pci_block_user_cfg_access(struct pci_dev *dev)
{
unsigned long flags;
+ int was_blocked;
- pci_save_state(dev);
-
- /* spinlock to synchronize with anyone reading config space now */
spin_lock_irqsave(&pci_lock, flags);
+ was_blocked = dev->block_ucfg_access;
dev->block_ucfg_access = 1;
spin_unlock_irqrestore(&pci_lock, flags);
+
+ /* If we BUG() inside the pci_lock, we're guaranteed to hose
+ * the machine */
+ BUG_ON(was_blocked);
}
EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
@@ -140,14 +154,19 @@ EXPORT_SYMBOL_GPL(pci_block_user_cfg_acc
* @dev: pci device struct
*
* This function allows userspace PCI config accesses to resume.
- **/
+ */
void pci_unblock_user_cfg_access(struct pci_dev *dev)
{
unsigned long flags;
- /* spinlock to synchronize with anyone reading saved config space */
spin_lock_irqsave(&pci_lock, flags);
+
+ /* This indicates a problem in the caller, but we don't need
+ * to kill them, unlike a double-block above. */
+ WARN_ON(!dev->block_ucfg_access);
+
dev->block_ucfg_access = 0;
+ wake_up_all(&pci_ucfg_wait);
spin_unlock_irqrestore(&pci_lock, flags);
}
EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 2dde821..5d06837 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6174,6 +6174,7 @@ static int ipr_reset_start_bist(struct i
int rc;
ENTER;
+ pci_save_state(ioa_cfg->pdev);
pci_block_user_cfg_access(ioa_cfg->pdev);
rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]