On Mon, 16 Oct 2006, Andries Brouwer wrote:
> On Mon, Oct 16, 2006 at 09:50:15AM +1000, Neil Brown wrote:
> > On Sunday October 15, [email protected] wrote:
>
> > > I wonder if there's ever a change the kernel partition detection code could
> > > _write_ on the disk, even when there's really no partition table?
> >
> > No, kernel partition detection never writes.
>
> There is something else that writes, however, that I have gotten complaints about.
> (But I have not investigated.)
> People doing forensics take a copy of a disk and want to preserve
> that copy as-is, never changing a single bit, only looking at it.
> But it is reported that also when a partition is mounted read-only,
> the journaling code of ext3 will write to the journal.
xfs has a similar problem -- on umount it writes even if the filesystem
was mounted read-only. for example here's a test with a small loopback
device, note the two WRITEs to loop0 near the bottom of the block_dump.
# echo 1 >/proc/sys/vm/block_dump; mount -o ro /dev/loop/0 /mnt; sleep 1; umount /mnt; sleep 1; echo 0 >/proc/sys/vm/block_dump
<7>mount(14602): READ block 0 on loop0
<7>mount(14602): READ block 8 on loop0
<7>mount(14602): READ block 16 on loop0
<7>mount(14602): READ block 24 on loop0
<7>mount(14602): READ block 32 on loop0
<7>mount(14602): READ block 40 on loop0
<7>mount(14602): READ block 48 on loop0
<7>mount(14602): READ block 56 on loop0
<7>mount(14602): READ block 64 on loop0
<7>mount(14602): READ block 72 on loop0
<7>mount(14602): READ block 80 on loop0
<7>mount(14602): READ block 88 on loop0
<7>mount(14602): READ block 96 on loop0
<7>mount(14602): READ block 104 on loop0
<7>mount(14602): READ block 112 on loop0
<7>mount(14602): READ block 120 on loop0
<7>mount(14602): READ block 128 on loop0
<7>mount(14602): READ block 136 on loop0
<7>mount(14602): READ block 144 on loop0
<7>mount(14602): READ block 152 on loop0
<7>mount(14602): READ block 160 on loop0
<7>mount(14602): READ block 168 on loop0
<7>mount(14602): READ block 176 on loop0
<7>mount(14602): READ block 184 on loop0
<7>mount(14602): READ block 192 on loop0
<7>mount(14602): READ block 200 on loop0
<7>mount(14602): READ block 208 on loop0
<7>mount(14602): READ block 216 on loop0
<7>mount(14602): READ block 224 on loop0
<7>mount(14602): READ block 232 on loop0
<7>mount(14602): READ block 240 on loop0
<7>mount(14602): READ block 248 on loop0
<7>mount(14602): READ block 0 on loop0
<7>mount(14602): READ block 524280 on loop0
<5>XFS mounting filesystem loop0
<7>mount(14602): READ block 262176 on loop0
<7>mount(14602): READ block 271775 on loop0
<7>mount(14602): READ block 266975 on loop0
<7>mount(14602): READ block 264575 on loop0
<7>mount(14602): READ block 263375 on loop0
<7>mount(14602): READ block 262775 on loop0
<7>mount(14602): READ block 262475 on loop0
<7>mount(14602): READ block 262325 on loop0
<7>mount(14602): READ block 262250 on loop0
<7>mount(14602): READ block 262213 on loop0
<7>mount(14602): READ block 262194 on loop0
<7>mount(14602): READ block 262185 on loop0
<7>mount(14602): READ block 262180 on loop0
<7>mount(14602): READ block 262178 on loop0
<7>mount(14602): READ block 262179 on loop0
<7>mount(14602): READ block 262176 on loop0
<7>mount(14602): READ block 262176 on loop0
<7>mount(14602): READ block 262179 on loop0
<7>mount(14602): READ block 262178 on loop0
<7>mount(14602): READ block 262179 on loop0
<7>mount(14602): READ block 64 on loop0
<7>Ending clean XFS mount for filesystem: loop0
<7>mount(14602): dirtied inode 8880357 (blkid.tab-rOdAVQ) on md3
<7>mount(14602): dirtied inode 8880459 (?) on md3
<7>md3_raid1(821): WRITE block 147539744 on sdb4
<7>md3_raid1(821): WRITE block 147539744 on sda4
<7>md3_raid1(821): WRITE block 147539760 on sdb4
<7>md3_raid1(821): WRITE block 147539760 on sda4
<7>md3_raid1(821): WRITE block 147539768 on sdb4
<7>md3_raid1(821): WRITE block 147539768 on sda4
<7>md3_raid1(821): WRITE block 147539720 on sdb4
<7>md3_raid1(821): WRITE block 147539720 on sda4
<7>md3_raid1(821): WRITE block 147539784 on sdb4
<7>md3_raid1(821): WRITE block 147539784 on sda4
<7>umount(14607): WRITE block 0 on loop0
<7>loop0(14289): dirtied inode 19 (test) on md3
<7>umount(14607): WRITE block 0 on loop0
<7>umount(14607): dirtied inode 8880877 (mtab.tmp) on md3
<7>zsh(4125): dirtied inode 4026531942 (block_dump) on proc
-dean
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]