[PATCH 4/5] Correct initial and close hardware step.

[Jesse Huang <jesse@icplus.com.tw>]

From: Jesse Huang <jesse@icplus.com.tw>

Change Logs:
Correct initial and close hardware step. In some embedded system down and up
IP100A will cause DMA crash. We add some for safe down and up IP100A.

Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
---

 drivers/net/sundance.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

1bbb3f6231fa1f52a9f61e299f22610d357f6041
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 679eda4..14b4933 100755
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -789,6 +789,7 @@ static int netdev_open(struct net_device
 {
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem *ioaddr = np->base;
+	unsigned long flags;
 	int i;
 
 	/* Do we need to reset the chip??? */
@@ -833,6 +834,10 @@ #endif
 		iowrite8(0x01, ioaddr + DebugCtrl1);
 	netif_start_queue(dev);
 
+	spin_lock_irqsave(&np->lock, flags);
+	reset_tx(dev);
+	spin_unlock_irqrestore(&np->lock, flags);
+
 	iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1);
 
 	if (netif_msg_ifup(np))
@@ -1652,6 +1657,9 @@ static int netdev_close(struct net_devic
 	/* Disable interrupts by clearing the interrupt mask. */
 	iowrite16(0x0000, ioaddr + IntrEnable);
 
+	/* Disable Rx and Tx DMA for safely release resource */
+	iowrite32(0x500, ioaddr + DMACtrl);
+
 	/* Stop the chip's Tx and Rx processes. */
 	iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
 
-- 
1.3.GIT



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/