> Pierre Ossman wrote:
>> + cmd.arg = 0x03B90100;
>>
>
> I'd prefer some defines and shifts here. Also, this should be done at
> init, not at select. The reason SD does it is that the spec says it
> drops out of wide mode when it gets unselected.
I have done this, but your suggestion somewhat contradicts your original
suggestion to remove the defines. Essentially, my updated change restores
the relevant definitions from my very first diff. I hope this is what you
wanted. I prefer to have the #defines, so I'm not complaining.
I also moved the explaination of the MMC_SWITCH argument to protocol.h I
think it's worth documenting somewhere.
I have moved this work into the read_ext_csd function and renamed it
process_ext_csd.
> A "max_dtr" int the mmc_ext_csd structure would be nicer here. And you
> cannot do a kernel BUG because the card is broken. You should mark it as
> dead.
I have replaced storing the CARD_TYPE value with storing a dtr based on
the CARD_TYPE which should achieve what you wanted. I've replaced the
BUG with marking the card as bad.
Finally, as pointed out by Jarkko, I added the missing MMC_CMD flags to
the calls to MMC_SWITCH and MMC_SEND_EXT_CSD;
Thanks,
--phil
Signed-off-by: Philip Langdale <[email protected]>
---
drivers/mmc/mmc.c | 114 ++++++++++++++++++++++++++++++++++++++++++-
include/linux/mmc/card.h | 8 +++
include/linux/mmc/protocol.h | 47 ++++++++++++++++-
3 files changed, 164 insertions(+), 5 deletions(-)
diff -urN /usr/src/linux-2.6.18/drivers/mmc/mmc.c linux-2.6.18-mmc4/drivers/mmc/mmc.c
--- /usr/src/linux-2.6.18/drivers/mmc/mmc.c 2006-09-19 20:42:06.000000000 -0700
+++ linux-2.6.18-mmc4/drivers/mmc/mmc.c 2006-10-10 22:31:15.000000000 -0700
@@ -4,6 +4,7 @@
* Copyright (C) 2003-2004 Russell King, All Rights Reserved.
* SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
* SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved.
+ * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -953,6 +954,107 @@
}
}
+static void mmc_process_ext_csds(struct mmc_host *host)
+{
+ int err;
+ struct mmc_card *card;
+
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+
+ struct scatterlist sg;
+
+ /*
+ * As the ext_csd is so large and mostly unused, we don't store the
+ * raw block in mmc_card.
+ */
+ u8 ext_csd[512];
+
+ list_for_each_entry(card, &host->cards, node) {
+ if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT))
+ continue;
+ if (mmc_card_sd(card))
+ continue;
+ if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+ continue;
+
+ err = mmc_select_card(host, card);
+ if (err != MMC_ERR_NONE) {
+ mmc_card_set_dead(card);
+ continue;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_EXT_CSD;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mmc_set_data_timeout(&data, card, 0);
+
+ data.blksz_bits = 9;
+ data.blksz = 1 << 9;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ sg_init_one(&sg, &ext_csd, 512);
+
+ mmc_wait_for_req(host, &mrq);
+
+ if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
+ mmc_card_set_dead(card);
+ continue;
+ }
+
+ switch (ext_csd[EXT_CSD_CARD_TYPE]) {
+ case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
+ card->ext_csd.hs_max_dtr = 52000000;
+ break;
+ case EXT_CSD_CARD_TYPE_26:
+ card->ext_csd.hs_max_dtr = 26000000;
+ break;
+ default:
+ /* MMC v4 spec says this cannot happen */
+ printk("%s: card is mmc v4 but doesn't support "
+ "any high-speed modes.\n",
+ mmc_hostname(card->host));
+ mmc_card_set_bad(card);
+ /* printk a warning */
+ continue;
+ }
+
+ /* Activate highspeed support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_HS_TIMING << 16) |
+ (1 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to mmc v4 "
+ "high-speed mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
+
+ mmc_card_set_highspeed(card);
+ }
+
+ mmc_deselect_cards(host);
+}
+
static void mmc_read_scrs(struct mmc_host *host)
{
int err;
@@ -1032,8 +1134,14 @@
unsigned int max_dtr = host->f_max;
list_for_each_entry(card, &host->cards, node)
- if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr)
- max_dtr = card->csd.max_dtr;
+ if (!mmc_card_dead(card)) {
+ if (mmc_card_highspeed(card)) {
+ if (max_dtr > card->ext_csd.hs_max_dtr)
+ max_dtr = card->ext_csd.hs_max_dtr;
+ } else if (max_dtr > card->csd.max_dtr) {
+ max_dtr = card->csd.max_dtr;
+ }
+ }
pr_debug("%s: selected %d.%03dMHz transfer rate\n",
mmc_hostname(host),
@@ -1153,6 +1261,8 @@
if (host->mode == MMC_MODE_SD)
mmc_read_scrs(host);
+ else
+ mmc_process_ext_csds(host);
}
diff -urN /usr/src/linux-2.6.18/include/linux/mmc/card.h linux-2.6.18-mmc4/include/linux/mmc/card.h
--- /usr/src/linux-2.6.18/include/linux/mmc/card.h 2006-09-19 20:42:06.000000000 -0700
+++ linux-2.6.18-mmc4/include/linux/mmc/card.h 2006-10-10 21:47:52.000000000 -0700
@@ -39,6 +39,10 @@
write_misalign:1;
};
+struct mmc_ext_csd {
+ unsigned int hs_max_dtr;
+};
+
struct sd_scr {
unsigned char sda_vsn;
unsigned char bus_widths;
@@ -62,11 +66,13 @@
#define MMC_STATE_BAD (1<<2) /* unrecognised device */
#define MMC_STATE_SDCARD (1<<3) /* is an SD card */
#define MMC_STATE_READONLY (1<<4) /* card is read-only */
+#define MMC_STATE_HIGHSPEED (1<<5) /* card is in mmc4 highspeed mode */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
u32 raw_scr[2]; /* raw card SCR */
struct mmc_cid cid; /* card identification */
struct mmc_csd csd; /* card specific */
+ struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
struct sd_scr scr; /* extra SD information */
};
@@ -75,12 +81,14 @@
#define mmc_card_bad(c) ((c)->state & MMC_STATE_BAD)
#define mmc_card_sd(c) ((c)->state & MMC_STATE_SDCARD)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
+#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_dead(c) ((c)->state |= MMC_STATE_DEAD)
#define mmc_card_set_bad(c) ((c)->state |= MMC_STATE_BAD)
#define mmc_card_set_sd(c) ((c)->state |= MMC_STATE_SDCARD)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
+#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) ((c)->dev.bus_id)
diff -urN /usr/src/linux-2.6.18/include/linux/mmc/protocol.h linux-2.6.18-mmc4/include/linux/mmc/protocol.h
--- /usr/src/linux-2.6.18/include/linux/mmc/protocol.h 2006-09-19 20:42:06.000000000 -0700
+++ linux-2.6.18-mmc4/include/linux/mmc/protocol.h 2006-10-10 21:48:52.000000000 -0700
@@ -25,14 +25,16 @@
#ifndef MMC_MMC_PROTOCOL_H
#define MMC_MMC_PROTOCOL_H
-/* Standard MMC commands (3.1) type argument response */
+/* Standard MMC commands (4.1) type argument response */
/* class 1 */
#define MMC_GO_IDLE_STATE 0 /* bc */
#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
+#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
+#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
@@ -87,6 +89,17 @@
#define SD_APP_SEND_SCR 51 /* adtc R1 */
/*
+ * MMC_SWITCH argument format:
+ *
+ * [31:26] Always 0
+ * [25:24] Access Mode
+ * [23:16] Location of target Byte in EXT_CSD
+ * [15:08] Value Byte
+ * [07:03] Always 0
+ * [02:00] Command Set
+ */
+
+/*
MMC status in R1
Type
e : error bit
@@ -229,13 +242,41 @@
#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
-#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */
+#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
+#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */
#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
-#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */
+#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */
+#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */
+
+/*
+ * EXT_CSD fields
+ */
+
+#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_CARD_TYPE 196 /* RO */
+
+/*
+ * EXT_CSD field definitions
+ */
+
+#define EXT_CSD_CMD_SET_NORMAL (1<<0)
+#define EXT_CSD_CMD_SET_SECURE (1<<1)
+#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
+
+#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
+
+/*
+ * MMC_SWITCH access modes
+ */
+#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
+#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */
+#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
+#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
/*
* SD bus widths
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
