[60027.250000] BUG: unable to handle kernel paging request at virtual
address 756e6567
[60027.250000] printing eip:
[60027.250000] c016f2ee
[60027.250000] *pde = 00000000
[60027.250000] Oops: 0000 [#1]
[60027.250000] SMP
[60027.250000] Modules linked in: ppp_deflate zlib_deflate zlib_inflate
bsd_comp ppp_async ppp_generic slhc ip_gre nls_cp437 vfat fat usb_storage
usbhid i915 snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd soundcore snd_page_alloc binfmt_misc cpufreq_ondemand
container video thermal i2c_ec fan dock button battery ac tun
speedstep_centrino freq_table processor ibm_acpi sbp2 nvram eth1394 hci_usb
bluetooth pcmcia firmware_class irtty_sir sir_dev generic ohci1394 nsc_ircc
ide_core irda psmouse ieee1394 crc_ccitt yenta_socket rsrc_nonstatic
pcmcia_core ehci_hcd uhci_hcd serio_raw usbcore sdhci mmc_core evdev pcspkr
[60027.250000] CPU: 1
[60027.250000] EIP: 0060:[<c016f2ee>] Not tainted VLI
[60027.250000] EFLAGS: 00010286
(2.6.19-rc1+tpsmapi-ieee80211-nohdaps-gf1d08f71-dirty #1)
[60027.250000] EIP is at iput+0xd/0x66
[60027.250000] eax: 756e6547 ebx: c041ed90 ecx: c016e2ab edx: e999c114
[60027.250000] esi: e9996d18 edi: e9996df8 ebp: f78b3600 esp: e6839de4
[60027.250000] ds: 007b es: 007b ss: 0068
[60027.250000] Process mount (pid: 2292, ti=e6838000 task=d6b7c030
task.ti=e6838000)
[60027.250000] Stack: e9996df8 c016e41c e9996e20 e9996d18 c016e71e fffffff3
00000000 f78b3600
[60027.250000] c36d7000 c0161053 00000000 f78b363c 00000000 f78b3600
00000000 c017227d
[60027.250000] 00000000 c36d7000 00000000 d5e17000 c36e5000 000003bb
00000020 0cf68720
[60027.250000] Call Trace:
[60027.251000] [<c016e41c>] prune_one_dentry+0x53/0x74
[60027.252000] [<c016e71e>] shrink_dcache_sb+0x8f/0xb3
[60027.253000] [<c0161053>] do_remount_sb+0x40/0x120
[60027.253000] [<c017227d>] do_mount+0x1b0/0x66c
[60027.254000] [<c01727b0>] sys_mount+0x77/0xb3
[60027.255000] [<c0102dc3>] syscall_call+0x7/0xb
[60027.255000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[60027.255000]
[60027.255000] Leftover inexact backtrace:
[60027.255000]
[60027.255000] =======================
[60027.255000] Code: ba 03 00 00 00 e9 97 07 fc ff 83 a0 2c 01 00 00 b7 e9
e0 ff ff ff e8 8a 36 17 00 31 c0 c3 53 89 c3 85 c0 74 5d 8b 80 98 00 00 00
<8b> 40 20 83 bb 2c 01 00 00 20 75 08 0f 0b 5d 04 a0 59 30 c0 85
[60027.255000] EIP: [<c016f2ee>] iput+0xd/0x66 SS:ESP 0068:e6839de4
[60027.255000]
dmesg attached
belive it or not: after that acpi events work again
I did not reboot but only suspended to ram and resumed again
so that makes: whenever I suspend/resume something strange happens which
makes my ACPI events diappear/reappear
I will reboot now to avoid instabilities
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
ound at 14
[22692.825000] usb-storage: waiting for device to settle before scanning
[22697.826000] scsi 9:0:0:0: Direct-Access USB 2.0 memory 0.00 PQ: 0 ANSI: 2
[22697.828000] SCSI device sdb: 1024000 512-byte hdwr sectors (524 MB)
[22697.828000] sdb: Write Protect is off
[22697.828000] sdb: Mode Sense: 00 00 00 00
[22697.828000] sdb: assuming drive cache: write through
[22697.830000] SCSI device sdb: 1024000 512-byte hdwr sectors (524 MB)
[22697.831000] sdb: Write Protect is off
[22697.831000] sdb: Mode Sense: 00 00 00 00
[22697.831000] sdb: assuming drive cache: write through
[22697.831000] sdb: sdb1
[22698.019000] sd 9:0:0:0: Attached scsi removable disk sdb
[22698.019000] usb-storage: device scan complete
[22980.504000] usb 5-5: USB disconnect, address 14
[56763.356000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[56763.357000] ieee80211_crypt: unregistered algorithm 'NULL'
[56767.070000] Disabling non-boot CPUs ...
[56767.178000] CPU 1 is now offline
[56767.178000] SMP alternatives: switching to UP code
[56767.182000] CPU1 is down
[56767.182000] Stopping tasks: =======================================================================================================================================================================================================================================================================|
[56767.441000] Suspending console(s)
[56767.453000] usbdev4.8_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2
[56767.453000] usbdev4.8_ep02: PM: suspend 0->2, parent 4-2:1.0 already 2
[56767.453000] usbdev4.8_ep81: PM: suspend 0->2, parent 4-2:1.0 already 2
[56767.453000] usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2
[56767.453000] usbdev4.8_ep00: PM: suspend 0->2, parent 4-2 already 2
[56769.134000] pnp: Device 00:0a disabled.
[56769.134000] ACPI: PCI interrupt for device 0000:15:00.2 disabled
[56769.156000] ACPI: PCI interrupt for device 0000:15:00.0 disabled
[56769.200000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[56769.213000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[56769.224000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[56769.335000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[56769.335000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[56769.335000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[56769.335000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[56769.337000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[56769.337000] Intel machine check architecture supported.
[56769.337000] Intel machine check reporting enabled on CPU#0.
[56769.337000] Back to C!
[57422.955000] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003)
[57422.955000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
[57422.955000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
[57422.955000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
[57422.955000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[57422.974000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
[57422.974000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[57422.974000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
[57422.974000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[57422.974000] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
[57422.974000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[57422.974000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
[57422.974000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
[57422.974000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
[57422.974000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070)
[57422.974000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
[57422.974000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
[57422.974000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[57422.974000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
[57422.974000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[57422.974000] usb usb1: root hub lost power or was reset
[57422.974000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
[57422.974000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[57422.974000] usb usb2: root hub lost power or was reset
[57422.974000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[57422.974000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[57422.974000] usb usb3: root hub lost power or was reset
[57422.974000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23
[57422.974000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[57422.974000] usb usb4: root hub lost power or was reset
[57423.285000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
[57423.285000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[57423.285000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
[57423.285000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[57423.296000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
[57423.296000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[57424.308000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[57424.308000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[57424.351000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100100)
[57424.351000] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
[57424.351000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[57424.393000] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing e4301000)
[57424.393000] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
[57424.393000] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
[57424.404000] PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing e4301800)
[57424.404000] PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
[57424.404000] PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
[57424.404000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 21
[57424.415000] pnp: Device 00:08 does not support activation.
[57424.415000] pnp: Device 00:09 does not support activation.
[57424.416000] pnp: Device 00:0a activated.
[57424.600000] ata2: SATA link down (SStatus 0 SControl 0)
[57424.600000] ata3: SATA link down (SStatus 0 SControl 0)
[57424.600000] ata4: SATA link down (SStatus 0 SControl 0)
[57424.830000] nsc_ircc_init_dongle_interface(), No dongle connected
[57424.830000] nsc_ircc_change_dongle_speed(), No dongle connected is not for IrDA mode
[57424.842000] usbdev4.8_ep00: PM: resume from 0, parent 4-2 still 2
[57424.842000] usbdev4.8_ep81: PM: resume from 0, parent 4-2:1.0 still 2
[57424.842000] usbdev4.8_ep02: PM: resume from 0, parent 4-2:1.0 still 2
[57424.842000] usbdev4.8_ep83: PM: resume from 0, parent 4-2:1.0 still 2
[57424.842000] usbdev4.9_ep00: PM: resume from 0, parent 4-1 still 2
[57424.842000] hci_usb 4-1:1.0: PM: resume from 2, parent 4-1 still 2
[57424.842000] hci0: PM: resume from 0, parent 4-1:1.0 still 2
[57424.842000] usbdev4.9_ep81: PM: resume from 0, parent 4-1:1.0 still 2
[57424.842000] usbdev4.9_ep82: PM: resume from 0, parent 4-1:1.0 still 2
[57424.842000] usbdev4.9_ep02: PM: resume from 0, parent 4-1:1.0 still 2
[57424.842000] hci_usb 4-1:1.1: PM: resume from 2, parent 4-1 still 2
[57424.842000] usbdev4.9_ep83: PM: resume from 0, parent 4-1:1.1 still 2
[57424.842000] usbdev4.9_ep03: PM: resume from 0, parent 4-1:1.1 still 2
[57424.842000] usb 4-1:1.2: PM: resume from 2, parent 4-1 still 2
[57424.842000] usbdev4.9_ep84: PM: resume from 0, parent 4-1:1.2 still 2
[57424.842000] usbdev4.9_ep04: PM: resume from 0, parent 4-1:1.2 still 2
[57424.842000] usb 4-1:1.3: PM: resume from 2, parent 4-1 still 2
[57424.843000] Restarting tasks...<6>usb 4-1: USB disconnect, address 9
[57424.868000] done
[57424.868000] Enabling non-boot CPUs ...
[57424.900000] SMP alternatives: switching to SMP code
[57424.901000] Booting processor 1/1 eip 3000
[57424.911000] Initializing CPU#1
[57424.972000] Calibrating delay using timer specific routine.. 3325.04 BogoMIPS (lpj=1662520)
[57424.972000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[57424.972000] monitor/mwait feature present.
[57424.972000] CPU: L1 I cache: 32K, L1 D cache: 32K
[57424.972000] CPU: L2 cache: 2048K
[57424.972000] CPU: Physical Processor ID: 0
[57424.972000] CPU: Processor Core ID: 1
[57424.972000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000
[57424.972000] Intel machine check architecture supported.
[57424.972000] Intel machine check reporting enabled on CPU#1.
[57424.972000] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08
[57424.999000] usb 4-2: USB disconnect, address 8
[57425.205000] usb 4-2: new full speed USB device using uhci_hcd and address 10
[57425.369000] usb 4-2: configuration #1 chosen from 1 choice
[57425.624000] CPU1 is up
[57425.787000] usb 4-1: new full speed USB device using uhci_hcd and address 11
[57425.823000] ata1: waiting for device to spin up (7 secs)
[57425.998000] usb 4-1: configuration #1 chosen from 1 choice
[57433.805000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57433.809000] ata1.00: configured for UDMA/100
[57433.810000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[57433.810000] sda: Write Protect is off
[57433.810000] sda: Mode Sense: 00 3a 00 00
[57433.810000] SCSI device sda: drive cache: write back
[58268.899000] Disabling non-boot CPUs ...
[58269.008000] CPU 1 is now offline
[58269.008000] SMP alternatives: switching to UP code
[58269.013000] CPU1 is down
[58269.013000] Stopping tasks: ===============================================================================================================|
[58270.649000] Suspending console(s)
[58270.661000] usbdev4.10_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2
[58270.661000] usbdev4.10_ep02: PM: suspend 0->2, parent 4-2:1.0 already 2
[58270.661000] usbdev4.10_ep81: PM: suspend 0->2, parent 4-2:1.0 already 2
[58270.661000] usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2
[58270.661000] usbdev4.10_ep00: PM: suspend 0->2, parent 4-2 already 2
[58272.370000] pnp: Device 00:0a disabled.
[58272.371000] ACPI: PCI interrupt for device 0000:15:00.2 disabled
[58272.393000] ACPI: PCI interrupt for device 0000:15:00.0 disabled
[58272.437000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[58272.450000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[58272.461000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[58272.872000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[58272.872000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[58272.872000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[58272.872000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[58272.873000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[58272.873000] Intel machine check architecture supported.
[58272.873000] Intel machine check reporting enabled on CPU#0.
[58272.873000] Back to C!
[58806.491000] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003)
[58806.491000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
[58806.491000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
[58806.492000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
[58806.492000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[58806.510000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
[58806.510000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[58806.510000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
[58806.510000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[58806.510000] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
[58806.510000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[58806.510000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
[58806.510000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
[58806.510000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
[58806.510000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20008070)
[58806.510000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
[58806.510000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
[58806.510000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[58806.510000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
[58806.510000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[58806.510000] usb usb1: root hub lost power or was reset
[58806.510000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
[58806.510000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[58806.510000] usb usb2: root hub lost power or was reset
[58806.510000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[58806.510000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[58806.510000] usb usb3: root hub lost power or was reset
[58806.510000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23
[58806.510000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[58806.510000] usb usb4: root hub lost power or was reset
[58806.821000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
[58806.821000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[58806.821000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
[58806.821000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[58806.832000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
[58806.832000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[58807.844000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[58807.844000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[58807.887000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100100)
[58807.887000] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
[58807.887000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[58807.929000] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing e4301000)
[58807.929000] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
[58807.929000] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
[58807.940000] PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing e4301800)
[58807.940000] PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
[58807.940000] PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
[58807.940000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 21
[58807.951000] pnp: Device 00:08 does not support activation.
[58807.951000] pnp: Device 00:09 does not support activation.
[58807.952000] pnp: Device 00:0a activated.
[58808.136000] ata2: SATA link down (SStatus 0 SControl 0)
[58808.136000] ata3: SATA link down (SStatus 0 SControl 0)
[58808.136000] ata4: SATA link down (SStatus 0 SControl 0)
[58808.359000] nsc_ircc_init_dongle_interface(), No dongle connected
[58808.359000] nsc_ircc_change_dongle_speed(), No dongle connected is not for IrDA mode
[58808.371000] usbdev4.10_ep00: PM: resume from 0, parent 4-2 still 2
[58808.371000] usbdev4.10_ep81: PM: resume from 0, parent 4-2:1.0 still 2
[58808.371000] usbdev4.10_ep02: PM: resume from 0, parent 4-2:1.0 still 2
[58808.371000] usbdev4.10_ep83: PM: resume from 0, parent 4-2:1.0 still 2
[58808.371000] usbdev4.11_ep00: PM: resume from 0, parent 4-1 still 2
[58808.371000] hci_usb 4-1:1.0: PM: resume from 2, parent 4-1 still 2
[58808.371000] hci0: PM: resume from 0, parent 4-1:1.0 still 2
[58808.371000] usbdev4.11_ep81: PM: resume from 0, parent 4-1:1.0 still 2
[58808.371000] usbdev4.11_ep82: PM: resume from 0, parent 4-1:1.0 still 2
[58808.371000] usbdev4.11_ep02: PM: resume from 0, parent 4-1:1.0 still 2
[58808.371000] hci_usb 4-1:1.1: PM: resume from 2, parent 4-1 still 2
[58808.371000] usbdev4.11_ep83: PM: resume from 0, parent 4-1:1.1 still 2
[58808.371000] usbdev4.11_ep03: PM: resume from 0, parent 4-1:1.1 still 2
[58808.371000] usb 4-1:1.2: PM: resume from 2, parent 4-1 still 2
[58808.371000] usbdev4.11_ep84: PM: resume from 0, parent 4-1:1.2 still 2
[58808.371000] usbdev4.11_ep04: PM: resume from 0, parent 4-1:1.2 still 2
[58808.371000] usb 4-1:1.3: PM: resume from 2, parent 4-1 still 2
[58808.372000] Restarting tasks...<6>usb 4-1: USB disconnect, address 11
[58808.439000] done
[58808.439000] Enabling non-boot CPUs ...
[58808.451000] SMP alternatives: switching to SMP code
[58808.452000] Booting processor 1/1 eip 3000
[58808.463000] Initializing CPU#1
[58808.523000] Calibrating delay using timer specific routine.. 3325.03 BogoMIPS (lpj=1662517)
[58808.523000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[58808.523000] monitor/mwait feature present.
[58808.523000] CPU: L1 I cache: 32K, L1 D cache: 32K
[58808.523000] CPU: L2 cache: 2048K
[58808.523000] CPU: Physical Processor ID: 0
[58808.523000] CPU: Processor Core ID: 1
[58808.523000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000
[58808.523000] Intel machine check architecture supported.
[58808.523000] Intel machine check reporting enabled on CPU#1.
[58808.523000] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08
[58808.524000] usb 4-2: USB disconnect, address 10
[58808.730000] usb 4-2: new full speed USB device using uhci_hcd and address 12
[58808.893000] usb 4-2: configuration #1 chosen from 1 choice
[58809.316000] usb 4-1: new full speed USB device using uhci_hcd and address 13
[58809.363000] ata1: waiting for device to spin up (7 secs)
[58809.476000] usb 4-1: configuration #1 chosen from 1 choice
[58809.829000] CPU1 is up
[58817.341000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[58817.345000] ata1.00: configured for UDMA/100
[58817.346000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[58817.346000] sda: Write Protect is off
[58817.347000] sda: Mode Sense: 00 3a 00 00
[58817.347000] SCSI device sda: drive cache: write back
[59739.489000] Disabling non-boot CPUs ...
[59739.594000] CPU 1 is now offline
[59739.594000] SMP alternatives: switching to UP code
[59739.597000] CPU1 is down
[59739.597000] Stopping tasks: ===========================================================================================================|
[59741.371000] Suspending console(s)
[59741.383000] usbdev4.12_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2
[59741.383000] usbdev4.12_ep02: PM: suspend 0->2, parent 4-2:1.0 already 2
[59741.383000] usbdev4.12_ep81: PM: suspend 0->2, parent 4-2:1.0 already 2
[59741.383000] usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2
[59741.383000] usbdev4.12_ep00: PM: suspend 0->2, parent 4-2 already 2
[59743.031000] pnp: Device 00:0a disabled.
[59743.031000] ACPI: PCI interrupt for device 0000:15:00.2 disabled
[59743.053000] ACPI: PCI interrupt for device 0000:15:00.0 disabled
[59743.097000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[59743.110000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[59743.121000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[59743.532000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[59743.532000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[59743.532000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[59743.532000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[59743.533000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[59743.533000] Intel machine check architecture supported.
[59743.533000] Intel machine check reporting enabled on CPU#0.
[59743.533000] Back to C!
[60014.557000] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003)
[60014.557000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
[60014.557000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
[60014.557000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
[60014.557000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[60014.575000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
[60014.575000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[60014.575000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
[60014.575000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[60014.575000] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
[60014.575000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[60014.575000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
[60014.575000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
[60014.575000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
[60014.575000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070)
[60014.575000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
[60014.575000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
[60014.575000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[60014.575000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
[60014.575000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[60014.575000] usb usb1: root hub lost power or was reset
[60014.575000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
[60014.575000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[60014.575000] usb usb2: root hub lost power or was reset
[60014.575000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[60014.575000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[60014.575000] usb usb3: root hub lost power or was reset
[60014.575000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23
[60014.575000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[60014.575000] usb usb4: root hub lost power or was reset
[60014.586000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
[60014.586000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[60014.587000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
[60014.587000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[60014.598000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
[60014.598000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[60015.610000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[60015.610000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[60015.653000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100100)
[60015.653000] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
[60015.653000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[60015.695000] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing e4301000)
[60015.695000] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
[60015.695000] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
[60015.706000] PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing e4301800)
[60015.706000] PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
[60015.706000] PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
[60015.706000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 21
[60015.717000] pnp: Device 00:08 does not support activation.
[60015.717000] pnp: Device 00:09 does not support activation.
[60015.718000] pnp: Device 00:0a activated.
[60015.902000] ata2: SATA link down (SStatus 0 SControl 0)
[60015.902000] ata3: SATA link down (SStatus 0 SControl 0)
[60015.902000] ata4: SATA link down (SStatus 0 SControl 0)
[60016.130000] nsc_ircc_init_dongle_interface(), No dongle connected
[60016.130000] nsc_ircc_change_dongle_speed(), No dongle connected is not for IrDA mode
[60016.142000] usbdev4.12_ep00: PM: resume from 0, parent 4-2 still 2
[60016.142000] usbdev4.12_ep81: PM: resume from 0, parent 4-2:1.0 still 2
[60016.142000] usbdev4.12_ep02: PM: resume from 0, parent 4-2:1.0 still 2
[60016.142000] usbdev4.12_ep83: PM: resume from 0, parent 4-2:1.0 still 2
[60016.142000] usbdev4.13_ep00: PM: resume from 0, parent 4-1 still 2
[60016.142000] hci_usb 4-1:1.0: PM: resume from 2, parent 4-1 still 2
[60016.142000] hci0: PM: resume from 0, parent 4-1:1.0 still 2
[60016.142000] usbdev4.13_ep81: PM: resume from 0, parent 4-1:1.0 still 2
[60016.142000] usbdev4.13_ep82: PM: resume from 0, parent 4-1:1.0 still 2
[60016.142000] usbdev4.13_ep02: PM: resume from 0, parent 4-1:1.0 still 2
[60016.142000] hci_usb 4-1:1.1: PM: resume from 2, parent 4-1 still 2
[60016.142000] usbdev4.13_ep83: PM: resume from 0, parent 4-1:1.1 still 2
[60016.142000] usbdev4.13_ep03: PM: resume from 0, parent 4-1:1.1 still 2
[60016.142000] usb 4-1:1.2: PM: resume from 2, parent 4-1 still 2
[60016.142000] usbdev4.13_ep84: PM: resume from 0, parent 4-1:1.2 still 2
[60016.142000] usbdev4.13_ep04: PM: resume from 0, parent 4-1:1.2 still 2
[60016.142000] usb 4-1:1.3: PM: resume from 2, parent 4-1 still 2
[60016.143000] Restarting tasks...<6>usb 4-1: USB disconnect, address 13
[60016.190000] done
[60016.190000] Enabling non-boot CPUs ...
[60016.196000] SMP alternatives: switching to SMP code
[60016.197000] Booting processor 1/1 eip 3000
[60016.208000] Initializing CPU#1
[60016.268000] Calibrating delay using timer specific routine.. 3325.09 BogoMIPS (lpj=1662546)
[60016.268000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[60016.268000] monitor/mwait feature present.
[60016.268000] CPU: L1 I cache: 32K, L1 D cache: 32K
[60016.268000] CPU: L2 cache: 2048K
[60016.268000] CPU: Physical Processor ID: 0
[60016.268000] CPU: Processor Core ID: 1
[60016.268000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000
[60016.268000] Intel machine check architecture supported.
[60016.268000] Intel machine check reporting enabled on CPU#1.
[60016.268000] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08
[60016.295000] usb 4-2: USB disconnect, address 12
[60016.332000] CPU1 is up
[60016.501000] usb 4-2: new full speed USB device using uhci_hcd and address 14
[60016.665000] usb 4-2: configuration #1 chosen from 1 choice
[60017.087000] usb 4-1: new full speed USB device using uhci_hcd and address 15
[60017.130000] ata1: waiting for device to spin up (7 secs)
[60017.247000] usb 4-1: configuration #1 chosen from 1 choice
[60024.699000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[60024.703000] ata1.00: configured for UDMA/100
[60024.704000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[60024.704000] sda: Write Protect is off
[60024.704000] sda: Mode Sense: 00 3a 00 00
[60024.704000] SCSI device sda: drive cache: write back
[60027.250000] BUG: unable to handle kernel paging request at virtual address 756e6567
[60027.250000] printing eip:
[60027.250000] c016f2ee
[60027.250000] *pde = 00000000
[60027.250000] Oops: 0000 [#1]
[60027.250000] SMP
[60027.250000] Modules linked in: ppp_deflate zlib_deflate zlib_inflate bsd_comp ppp_async ppp_generic slhc ip_gre nls_cp437 vfat fat usb_storage usbhid i915 snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc binfmt_misc cpufreq_ondemand container video thermal i2c_ec fan dock button battery ac tun speedstep_centrino freq_table processor ibm_acpi sbp2 nvram eth1394 hci_usb bluetooth pcmcia firmware_class irtty_sir sir_dev generic ohci1394 nsc_ircc ide_core irda psmouse ieee1394 crc_ccitt yenta_socket rsrc_nonstatic pcmcia_core ehci_hcd uhci_hcd serio_raw usbcore sdhci mmc_core evdev pcspkr
[60027.250000] CPU: 1
[60027.250000] EIP: 0060:[<c016f2ee>] Not tainted VLI
[60027.250000] EFLAGS: 00010286 (2.6.19-rc1+tpsmapi-ieee80211-nohdaps-gf1d08f71-dirty #1)
[60027.250000] EIP is at iput+0xd/0x66
[60027.250000] eax: 756e6547 ebx: c041ed90 ecx: c016e2ab edx: e999c114
[60027.250000] esi: e9996d18 edi: e9996df8 ebp: f78b3600 esp: e6839de4
[60027.250000] ds: 007b es: 007b ss: 0068
[60027.250000] Process mount (pid: 2292, ti=e6838000 task=d6b7c030 task.ti=e6838000)
[60027.250000] Stack: e9996df8 c016e41c e9996e20 e9996d18 c016e71e fffffff3 00000000 f78b3600
[60027.250000] c36d7000 c0161053 00000000 f78b363c 00000000 f78b3600 00000000 c017227d
[60027.250000] 00000000 c36d7000 00000000 d5e17000 c36e5000 000003bb 00000020 0cf68720
[60027.250000] Call Trace:
[60027.251000] [<c016e41c>] prune_one_dentry+0x53/0x74
[60027.252000] [<c016e71e>] shrink_dcache_sb+0x8f/0xb3
[60027.253000] [<c0161053>] do_remount_sb+0x40/0x120
[60027.253000] [<c017227d>] do_mount+0x1b0/0x66c
[60027.254000] [<c01727b0>] sys_mount+0x77/0xb3
[60027.255000] [<c0102dc3>] syscall_call+0x7/0xb
[60027.255000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[60027.255000]
[60027.255000] Leftover inexact backtrace:
[60027.255000]
[60027.255000] =======================
[60027.255000] Code: ba 03 00 00 00 e9 97 07 fc ff 83 a0 2c 01 00 00 b7 e9 e0 ff ff ff e8 8a 36 17 00 31 c0 c3 53 89 c3 85 c0 74 5d 8b 80 98 00 00 00 <8b> 40 20 83 bb 2c 01 00 00 20 75 08 0f 0b 5d 04 a0 59 30 c0 85
[60027.255000] EIP: [<c016f2ee>] iput+0xd/0x66 SS:ESP 0068:e6839de4
[60027.255000]
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
