On Mon, Oct 09, 2006 at 05:53:17PM +0100, Russell King wrote:
> On Mon, Oct 09, 2006 at 06:00:44PM +0300, Timo Teras wrote:
> > The card might go to inactive state (according to specification), if
> > there are unsupported bits set in the OCR.
>
> NAK. This breaks some MMC cards.
I see. But if we do send an OCR with an unsupported bit set, the card will
go to inactive state and is unusable. This problem is masked on controllers
with only 3.3V support, but I'm working with a controller supporting several
different voltages.
For example, I have a card giving an OCR reply of 0x0ff80080. The current
code will reply to this with 0x00000180 which is clearly incorrect.
Maybe something like "ocr &= 3 << bit;" would be more approriate?
Cheers,
Timo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
