Simple script that locks up my box with recent kernels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I've been using the this very simple script for a while to do test
builds of the kernel :


#!/bin/bash

for i in $(seq 1 100); do
       nice make distclean
       while true; do
               nice make randconfig
               grep -q "CONFIG_EXPERIMENTAL=y" .config
               if [ $? -eq 1 ]; then
                       break
               fi
       done
       cp .config config.${i}
       nice make -j3 > build.log.${i} 2>&1
done


Which has worked great in the past, but with recent kernels it has
been a sure way to cause a complete lockup within 1 hour :-(


The last kernel where I know for sure that it ran without problems is
2.6.17.13 .
The first kernel where I know for sure it caused lockups is
2.6.18-git15 .   I've also tested 2.6.18-git16, 2.6.18-git21 and
2.6.19-rc1-git2 and those 3 also lock up solid.

The lockup usually happens within 30 minutes, but sometimes the box
survives longer, but I've not seen it survive for more than 60 minutes
at most.
It doesn't seem to matter if I leave it alone just building kernels or
if I use it for other purposes while building in the background - if
anything, it seems to survive longer when I do other work while it
builds.

When the lockup happens the box just freezes and doesn't respond to
anything at all. Sometimes I can reboot with alt+sysrq+b but sometimes
not even that works.

Here's exactely what I do, so you can try to reproduce :

1) boot my distro (Slackware 11.0) into runlevel 4 (multi-user with
X), using kernel 2.6.19-rc1-git2 (or one of the other "known-bad"
kernels).

2) Log in via kdm, and once I'm at my KDE desktop I start 'konsole'.

3) cd into a dir holding a fresh copy of the 2.6.19-rc1-git2 source
and run the above script from a file named build-random.sh that I have
placed in the root of the source dir and made executable.

4) wait for 0-60 minutes.


After a reboot I find nothing in the logs, so I can't give you many
hints on what goes wrong, unfortunately.

Attached you can find the config I'm using for my current
2.6.19-rc1-git2 kernel that very consistently exhibits the problem,
and below are some details about my hardware and software environment.

I've run memtest86+ for ~12hrs without problems, just to rule out bad
RAM, and I've seen nothing at all in my logs to indicate that this
should be a hardware problem. Also, the fact that if I boot into
2.6.17.13 I can run the above script for hours and hours without
problems indiates to me that this is not a hardware issue.


# uname -a
Linux dragon 2.6.19-rc1-git2 #1 SMP PREEMPT Sat Oct 7 00:30:45 CEST
2006 i686 athlon-4 i386 GNU/Linux

# cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 35
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping        : 2
cpu MHz         : 2200.149
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
bogomips        : 4402.75

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 35
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping        : 2
cpu MHz         : 2200.149
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
bogomips        : 4399.53

# cat /proc/meminfo
MemTotal:      2071360 kB
MemFree:       1683228 kB
Buffers:         29092 kB
Cached:         193184 kB
SwapCached:          0 kB
Active:         165528 kB
Inactive:       141904 kB
HighTotal:     1179328 kB
HighFree:       895532 kB
LowTotal:       892032 kB
LowFree:        787696 kB
SwapTotal:      763076 kB
SwapFree:       763076 kB
Dirty:             184 kB
Writeback:           0 kB
AnonPages:       85096 kB
Mapped:          48360 kB
Slab:            66968 kB
SReclaimable:    33216 kB
SUnreclaim:      33752 kB
PageTables:       1256 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:   1798756 kB
Committed_AS:   285864 kB
VmallocTotal:   114680 kB
VmallocUsed:      6344 kB
VmallocChunk:   107532 kB

# lspci -vvx
00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express
and HyperTransport]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Capabilities: [40] HyperTransport: Slave or Primary Interface
               Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- DUL-
               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC-
TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
               Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
               Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC-
TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
               Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
LWI=8bit DwFcInEn- LWO=16bit DwFcOutEn-
               Revision ID: 1.05
               Link Frequency 0: 800MHz
               Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
               Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+
500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
               Link Frequency 1: 800MHz
               Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
               Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+
500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
               Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE-
CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
               Prefetchable memory behind bridge Upper: 00-00
               Bus Number: 00
       Capabilities: [5c] HyperTransport: MSI Mapping
       Capabilities: [68] HyperTransport: UnitID Clumping
       Capabilities: [74] HyperTransport: Interrupt Discovery and Configuration
       Capabilities: [7c] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
               Address: 00000000fee00000  Data: 0000
00: b9 10 95 16 07 00 10 00 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: ALi Corporation PCI Express Root Port (prog-if 00
[Normal decode])
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0, Cache Line Size: 64 bytes
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
       Memory behind bridge: ff200000-ff2fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
       BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
               Address: 00000000fee00000  Data: 0000
       Capabilities: [58] Express Root Port (Slot+) IRQ 0
               Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
               Device: Latency L0s <64ns, L1 <1us
               Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
               Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
               Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
               Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
               Link: Latency L0s <2us, L1 <32us
               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
               Link: Speed unknown, Width x1
               Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
               Slot: Number 0, PowerLimit 0.000000
               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
               Slot: AttnInd Off, PwrInd Off, Power-
               Root: Correctable- Non-Fatal- Fatal- PME-
       Capabilities: [7c] HyperTransport: MSI Mapping
       Capabilities: [88] HyperTransport: Revision ID: 1.05
00: b9 10 4b 52 06 01 10 00 00 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 20 ff 20 ff f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 00

00:02.0 PCI bridge: ALi Corporation PCI Express Root Port (prog-if 00
[Normal decode])
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0, Cache Line Size: 64 bytes
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
       Memory behind bridge: ff300000-ff3fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
       BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
               Address: 00000000fee00000  Data: 0000
       Capabilities: [58] Express Root Port (Slot+) IRQ 0
               Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
               Device: Latency L0s <64ns, L1 <1us
               Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
               Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
               Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
               Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port 0
               Link: Latency L0s <2us, L1 <32us
               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
               Link: Speed unknown, Width x1
               Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
               Slot: Number 0, PowerLimit 0.000000
               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
               Slot: AttnInd Off, PwrInd Off, Power-
               Root: Correctable- Non-Fatal- Fatal- PME-
       Capabilities: [7c] HyperTransport: MSI Mapping
       Capabilities: [88] HyperTransport: Revision ID: 1.05
00: b9 10 4c 52 06 01 10 00 00 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 00
20: 30 ff 30 ff f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 00

00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
       Capabilities: [40] HyperTransport: Slave or Primary Interface
               Command: BaseUnitID=4 UnitCnt=1 MastHost- DefDir- DUL-
               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC-
TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
               Link Config 0: MLWI=16bit DwFcIn- MLWO=8bit DwFcOut-
LWI=16bit DwFcInEn- LWO=8bit DwFcOutEn-
               Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
               Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
               Revision ID: 1.04
               Link Frequency 0: 800MHz
               Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
               Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+
500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
               Link Frequency 1: 200MHz
               Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
               Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
               Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE-
CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
               Prefetchable memory behind bridge Upper: 00-00
               Bus Number: 00
       Capabilities: [60] HyperTransport: Interrupt Discovery and Configuration
       Capabilities: [80] AGP version 3.0
               Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
               Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
00: b9 10 89 16 06 01 10 00 00 00 00 06 00 00 00 00
10: 08 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:05.0 PCI bridge: ALi Corporation AGP8X Controller (prog-if 00
[Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
       Memory behind bridge: ff400000-ff4fffff
       Prefetchable memory behind bridge: c7f00000-d7efffff
       Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
       BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00: b9 10 46 52 07 01 20 00 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 40 f0 00 20 22
20: 40 ff 40 ff f0 c7 e0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00

00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if
01 [Subtractive decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
       I/O behind bridge: 0000d000-0000dfff
       Memory behind bridge: ff500000-ff5fffff
       Prefetchable memory behind bridge: 88000000-880fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
       BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00: b9 10 49 52 07 01 00 00 00 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 20 d0 d0 00 22
20: 50 ff 50 ff 00 88 00 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00

00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
       Subsystem: ASRock Incorporation Unknown device 1563
       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (250ns min, 6000ns max)
00: b9 10 63 15 0f 00 00 02 70 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 15
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 18

00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
       Subsystem: ASRock Incorporation Unknown device 7101
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 71
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated
ethernet. (rev 40)
       Subsystem: ASRock Incorporation Unknown device 5263
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (5000ns min, 10000ns max), Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 10
       Region 0: I/O ports at e800 [size=256]
       Region 1: Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 63 52 07 01 10 02 40 00 00 02 08 20 00 00
10: 01 e8 00 00 00 fc 6f ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 52
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 14 28

00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if 8a
[Master SecP PriP])
       Subsystem: ASRock Incorporation Unknown device 5229
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32
       Interrupt: pin A routed to IRQ 0
       Region 0: I/O ports at <ignored>
       Region 1: I/O ports at <ignored>
       Region 2: I/O ports at <ignored>
       Region 3: I/O ports at <ignored>
       Region 4: I/O ports at ff00 [size=16]
00: b9 10 29 52 05 00 a0 02 c7 8a 01 01 00 20 00 00
10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
20: 01 ff 00 00 00 00 00 00 00 00 00 00 49 18 29 52
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
       Subsystem: ASRock Incorporation Unknown device 5237
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (20000ns max), Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 11
       Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00
10: 00 e0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 50

00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
       Subsystem: ASRock Incorporation Unknown device 5237
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (20000ns max), Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 3
       Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00
10: 00 d0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 50

00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
       Subsystem: ASRock Incorporation Unknown device 5237
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (20000ns max), Cache Line Size: 64 bytes
       Interrupt: pin C routed to IRQ 11
       Region 0: Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K]
00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00
10: 00 c0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50

00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
(prog-if 20 [EHCI])
       Subsystem: ASRock Incorporation Unknown device 5239
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
       Interrupt: pin D routed to IRQ 5
       Region 0: Memory at ff6ff800 (32-bit, non-prefetchable) [size=256]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Debug port
00: b9 10 39 52 16 01 b0 02 01 20 03 0c 10 20 80 00
10: 00 f8 6f ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 52
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 10 20

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
       Capabilities: [80] HyperTransport: Host or Secondary Interface
               !!! Possibly incomplete decoding
               Command: WarmRst+ DblEnd-
               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
               Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
               Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA Parhelia
AGP (rev 03) (prog-if 00 [VGA])
       Subsystem: Matrox Graphics, Inc. Parhelia 128Mb
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 5
       Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
       Region 1: Memory at ff4fe000 (32-bit, non-prefetchable) [size=8K]
       Expansion ROM at ff4c0000 [disabled] [size=128K]
       Capabilities: [dc] Power Management version 2
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [f0] AGP version 2.0
               Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
               Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
00: 2b 10 27 05 07 00 b0 02 03 00 00 03 10 20 00 00
10: 08 00 00 c8 00 e0 4f ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 40 08
30: 00 00 4c ff dc 00 00 00 00 00 00 00 05 01 10 20

04:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
       Subsystem: Creative Labs SBLive! 5.1 eMicro 28028
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (500ns min, 5000ns max)
       Interrupt: pin A routed to IRQ 20
       Region 0: I/O ports at d880 [size=32]
       Capabilities: [dc] Power Management version 1
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 11 02 00 05 01 90 02 0a 00 01 04 00 20 80 00
10: 81 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 67 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 02 14

04:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)
       Subsystem: Creative Labs Gameport Joystick
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32
       Region 0: I/O ports at dc00 [size=8]
       Capabilities: [dc] Power Management version 1
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 11 02 70 05 01 90 02 0a 00 80 09 00 20 80 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00

04:06.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
       Subsystem: Adaptec 29160N Ultra160 SCSI Controller
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 19
       BIST result: 00
       Region 0: I/O ports at d400 [disabled] [size=256]
       Region 1: Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K]
       Expansion ROM at 88000000 [disabled] [size=128K]
       Capabilities: [dc] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 05 90 80 00 16 01 b0 02 02 00 00 01 10 20 00 80
10: 01 d4 00 00 04 f0 5f ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 05 90 a0 62
30: 00 00 5c ff dc 00 00 00 00 00 00 00 03 01 28 19

04:07.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 42)
       Subsystem: D-Link System Inc DFE-530TX rev B
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (750ns min, 2000ns max), Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 18
       Region 0: I/O ports at d000 [size=256]
       Region 1: Memory at ff5fec00 (32-bit, non-prefetchable) [size=256]
       Expansion ROM at 88020000 [disabled] [size=64K]
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 65 30 17 01 10 02 42 00 00 02 10 20 00 00
10: 01 d0 00 00 00 ec 5f ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 11 01 14
30: 00 00 ff ff 40 00 00 00 00 00 00 00 0b 01 03 08

root@dragon:/home/juhl/download/kernel/linux-2.6.19-rc1-git2# scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux dragon 2.6.19-rc1-git2 #1 SMP PREEMPT Sat Oct 7 00:30:45 CEST
2006 i686 athlon-4 i386 GNU/Linux

Gnu C                  3.4.6
Gnu make               3.81
binutils               2.15.92.0.2
util-linux             2.12r
mount                  2.12r
module-init-tools      3.2.2
e2fsprogs              1.39
reiserfsprogs          3.6.19
quota-tools            3.13.
PPP                    2.4.4b1
Linux C Library        2.3.6
Dynamic linker (ldd)   2.3.6
Linux C++ Library      6.0.3
Procps                 3.2.7
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.97
udev                   097
Modules Loaded         snd_seq_oss snd_seq_midi_event snd_seq
snd_pcm_oss snd_mixer_oss agpgart snd_emu10k1 snd_rawmidi
snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device snd_timer
snd_page_alloc snd_util_mem snd_hwdep evdev snd


--
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html

Attachment: config.gz
Description: GNU Zip compressed data


[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux