On Fri, Oct 06, 2006 at 06:11:05PM +0100, Mel Gorman wrote:
> On (06/10/06 11:36), Vivek Goyal didst pronounce:
> > On Fri, Oct 06, 2006 at 03:33:12PM +0100, Mel Gorman wrote:
> > > > Linux version 2.6.18-git22 (root@elm3b239) (gcc version 4.1.0 (SUSE Linux)) #2 SMP Thu Oct 5 19:05:36 PDT 2006
> > > > Command line: root=/dev/sda1 vga=791 ip=9.47.67.239:9.47.67.50:9.47.67.1:255.255.255.0 resume=/dev/sdb1 showopts earlyprintk=serial,ttyS0,57600 console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda1 ABAT:1160100417
> > > > BIOS-provided physical RAM map:
> > > > BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> > > > BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> > > > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > > > BIOS-e820: 0000000000100000 - 00000000bff764c0 (usable)
> > > > BIOS-e820: 00000000bff764c0 - 00000000bff98880 (ACPI data)
> > > > BIOS-e820: 00000000bff98880 - 00000000c0000000 (reserved)
> > > > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> > > > BIOS-e820: 0000000100000000 - 0000000c00000000 (usable)
> > >
> > > I continued what Steve was doing this morning to see could this be
> > > pinned down. After placing 'CHECK;' in a few places as suggested by
> > > Andi's check, the problem code was identified as that following in
> > > mm/bootmem.c#init_bootmem_core()
> > >
> > > mapsize = get_mapsize(bdata);
> > > memset(bdata->node_bootmem_map, 0xff, mapsize);
> > >
> > > That explains the value in the array at least. A few more printfs around
> > > this point printed out the following in the boot log
> > >
> > > init_bootmem_core(0, 1909, 0, 12582912)
> > > init_bootmem_core: Calling memset(0xFFFF810000775000, 1572864)
> > > AAGH: afinfo corrupted at mm/bootmem.c:121
> > >
> > > where;
> > >
> > > 1909 == mapstart
> > > 0 == start
> > > 12582912 == end
> > > 1572864 == mapsize
> > >
> > > mapstart, start and end being the parameters being passed to
> > > init_bootmem_core(). This means we are calling memset for the physical
> > > range 0x775000 -> 0x8F5000 which is in a usable range according to the
> > > BIOS-e820 map it appears.
> > >
> >
> > Hi Mel,
> >
>
> Hi.
>
> > Where is bss placed in physical memory? I guess bss_start and bss_stop
> > from System.map will tell us. That will confirm that above memset step is
> > stomping over bss. Then we have to just find that somewhere probably
> > we allocated wrong physical memory area for bootmem allocator map.
> >
>
> BSS is at 0x643000 -> 0x777BC4
> init_bootmem wipes from 0x777000 -> 0x8F7000
>
> So the BSS bytes from 0x777000 ->0x777BC4 (which looks very suspiciously
> pile a page alignment of addr & PAGE_MASK) gets set to 0xFF. One possible
> fix is below. It adds a check in bad_addr() to see if the BSS section is
> about to be used for bootmap. It Seems To Work For Me (tm) and illustrates
> the source of the problem even if it's not the 100% correct fix.
>
> diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git22-clean/arch/x86_64/kernel/e820.c linux-2.6.18-git22-bss_relocate_fix/arch/x86_64/kernel/e820.c
> --- linux-2.6.18-git22-clean/arch/x86_64/kernel/e820.c 2006-10-05 20:42:07.000000000 +0100
> +++ linux-2.6.18-git22-bss_relocate_fix/arch/x86_64/kernel/e820.c 2006-10-06 17:39:51.000000000 +0100
> @@ -51,6 +51,7 @@ extern struct resource code_resource, da
> static inline int bad_addr(unsigned long *addrp, unsigned long size)
> {
> unsigned long addr = *addrp, last = addr + size;
> + unsigned long bss_start, bss_end;
>
> /* various gunk below that needed for SMP startup */
> if (addr < 0x8000) {
> @@ -77,6 +78,14 @@ static inline int bad_addr(unsigned long
> *addrp = __pa_symbol(&_end);
> return 1;
> }
> +
> + /* bss section */
> + bss_start = __pa_symbol(&__bss_start);
> + bss_end = PAGE_ALIGN(__pa_symbol(&__bss_stop));
> + if (addr >= bss_start && addr < bss_end) {
> + *addrp = bss_end;
> + return 1;
> + }
>
Surprising, the kernel code check just before this should have taken care
of it.
/* kernel code */
if (last >= __pa_symbol(&_text) && last < __pa_symbol(&_end)) {
*addrp = __pa_symbol(&_end);
return 1;
}
May be it can be changed to
if (last >= __pa_symbol(&_text) && last < PAGE_ALIGN(__pa_symbol(&_end))) {
But all this seem to be a stopgap fix. Still the real puzzle is exactly
where did it slip out and should be fixed there.
May be some more printks will help us.
Thanks
Vivek
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]