after a little more playing around:
I unloaded all acpi-related modules (still without having rebooted)
# for a in ibm_acpi ac battery button dock fan i2c_ec processor thermal video container; do modprobe -r $a; done
FATAL: Module processor is in use.
than restarting acpid which triggers loading of all modules
I get this in the log:
Oct 6 09:29:10 gimli kernel: [47459.529000] ACPI Exception (evxface-0545): AE_BAD_PARAMETER, Removing notify handler [20060707]
Oct 6 09:29:36 gimli kernel: [47485.131000] BUG: warning at fs/proc/generic.c:732/remove_proc_entry()
Oct 6 09:29:36 gimli kernel: [47485.131000] [<c0103bbd>] dump_trace+0x69/0x1af
Oct 6 09:29:36 gimli kernel: [47485.131000] [<c0103d1b>] show_trace_log_lvl+0x18/0x2c
Oct 6 09:29:36 gimli kernel: [47485.131000] [<c01043ba>] show_trace+0xf/0x11
Oct 6 09:29:36 gimli kernel: [47485.131000] [<c01044bd>] dump_stack+0x15/0x17
Oct 6 09:29:36 gimli kernel: [47485.131000] [<c018a1e0>] remove_proc_entry+0x142/0x19c
Oct 6 09:29:36 gimli kernel: [47485.131000] [<f928d09a>] acpi_video_bus_remove_fs+0x65/0x73 [video]
Oct 6 09:29:36 gimli kernel: [47485.131000] [<f928d469>] acpi_video_bus_remove+0x3a/0x55 [video]
Oct 6 09:29:36 gimli kernel: [47485.131000] [<c022910e>] acpi_bus_unregister_driver+0x3a/0x9f
Oct 6 09:29:36 gimli kernel: [47485.132000] [<f928e82e>] acpi_video_exit+0xa/0x1a [video]
Oct 6 09:29:36 gimli kernel: [47485.132000] [<c0139006>] sys_delete_module+0x17f/0x1a5
Oct 6 09:29:36 gimli kernel: [47485.132000] [<c0102da7>] syscall_call+0x7/0xb
Oct 6 09:29:36 gimli kernel: [47485.132000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
Oct 6 09:29:36 gimli kernel: [47485.132000]
Oct 6 09:29:36 gimli kernel: [47485.132000] Leftover inexact backtrace:
Oct 6 09:29:36 gimli kernel: [47485.132000]
Oct 6 09:29:36 gimli kernel: [47485.132000] [<c02e007b>] unix_dgram_connect+0x13f/0x140
Oct 6 09:29:36 gimli kernel: [47485.132000] =======================
Oct 6 09:29:54 gimli kernel: [47503.375000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
Oct 6 09:29:54 gimli kernel: [47503.375000] ibm_acpi:
http://ibm-acpi.sf.net/
Oct 6 09:29:55 gimli kernel: [47503.932000] ACPI: AC Adapter [AC] (on-line)
Oct 6 09:30:01 gimli kernel: [47510.250000] ACPI: Battery Slot [BAT0] (battery present)
Oct 6 09:30:01 gimli kernel: [47510.267000] ACPI: Power Button (FF) [PWRF]
Oct 6 09:30:01 gimli kernel: [47510.267000] ACPI: Lid Switch [LID]
Oct 6 09:30:01 gimli kernel: [47510.267000] ACPI: Sleep Button (CM) [SLPB]
Oct 6 09:30:01 gimli kernel: [47510.282000] ACPI: ACPI Dock Station Driver
Oct 6 09:30:02 gimli kernel: [47510.944000] ACPI: Thermal Zone [THM0] (47 C)
Oct 6 09:30:02 gimli kernel: [47510.946000] ACPI: Thermal Zone [THM1] (50 C)
Oct 6 09:30:02 gimli kernel: [47510.965000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Oct 6 09:30:02 gimli kernel: [47510.966000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
more info
# cat /proc/acpi/ibm/hotkey
status: enabled
mask: 0xff9f
commands: enable, disable, reset, <mask>
# cat /proc/acpi/ibm/ecdump
EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
EC 0x00: *a7 *05 *a0 *41 *fe *96 00 00 *1f *02 *47 00 00 00 *80 00
EC 0x10: 00 00 *ff *ff *f4 *3c *87 *09 *43 *ff *83 *01 *ff *ff *2d 00
EC 0x20: 00 *09 00 00 *4b 00 00 00 00 00 00 00 *89 00 00 *80
EC 0x30: *03 *07 *02 00 *30 *04 *04 00 *85 00 *30 *10 *2a *50 00 00
EC 0x40: 00 00 00 00 00 00 *14 *01 *0a 00 00 00 00 00 *04 00
EC 0x50: 00 *c0 *02 *23 *41 00 *3c *2d *03 *3f *2d *06 *25 *23 *30 00
EC 0x60: *80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EC 0x70: 00 00 00 00 00 *12 *30 *80 *2f *2c *80 *2d *1f *80 *1d *80
EC 0x80: 00 00 00 *06 *82 *0b *03 00 00 00 *0e *78 00 00 00 00
EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EC 0xa0: *e7 *08 *bd *0a *ff *ff *53 00 00 00 *6d *3f *ff *ff *c0 00
EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EC 0xc0: *2b *29 *80 *80 *80 *80 *80 *80 00 *41 00 00 00 00 *10 00
EC 0xd0: 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EC 0xe0: 00 00 00 00 00 00 00 00 10 80 a6 04 24 2e 55 03
EC 0xf0: 37 42 48 54 33 35 57 57 0c f5 60 7c 0c e7 63 93
and now the log from two suspend/resume cycles attached (my fingers were
faster than my braon on the last message)
thanks
mlo
On Fri, Oct 06, 2006 at 09:18:12AM +0200, Dipl.-Ing. Martin Lorenz wrote:
> *Waving hallo again*
>
> After partially solving one problem another occurs...
>
> With my most recent kernel
>
> commit d223a60106891bfe46febfacf46b20cd8509aaad
> tree ca81ba555de7a9a68605ef98f13fbc027439cdd2
> parent 77dc2db6d1d2703ee4e83d4b3dbecf4e06a910e6
> author Linus Torvalds <[email protected]> Wed, 04 Oct 2006 19:57:05 -0700
>
> with additional patch tp_smapi 0.30
>
> I can suspend exactly twice. will say, after second wakeup I don't get
> any ACPI events. I already searched for error messages in the logs and
> found this:
>
> Oct 6 08:49:09 gimli kernel: [45058.156000] ACPI Exception (evxface-0545):
> AE_BAD_PARAMETER, Removing notify handler [20060707]
>
> it occurs on unloading ibm_acpi module after resume
> reloading ibm_acpi dosen't change anything
>
> one message that is in the log for the first suspend/resume but not in the
> second is
> - Breaking affinity for irq 219
>
> and in the second I see this, which I guess has nothing to do with my
> problem...
>
> + e1000: eth0: e1000_watchdog: NIC Link is Down
> + BUG: warning at drivers/pci/msi.c:680/pci_enable_msi()
> + [<c0103bbd>] dump_trace+0x69/0x1af
> + [<c0103d1b>] show_trace_log_lvl+0x18/0x2c
> + [<c01043ba>] show_trace+0xf/0x11
> + [<c01044bd>] dump_stack+0x15/0x17
> + [<c0208d36>] pci_enable_msi+0x78/0x22e
> + [<c025808b>] e1000_open+0x64/0x176
> + [<c029b281>] dev_open+0x2b/0x62
> + [<c0299d8f>] dev_change_flags+0x47/0xe4
> + [<c02cde47>] devinet_ioctl+0x252/0x556
> + [<c0290ffa>] sock_ioctl+0x19e/0x1c2
> + [<c01697df>] do_ioctl+0x1f/0x62
> + [<c0169a67>] vfs_ioctl+0x245/0x257
> + [<c0169ac5>] sys_ioctl+0x4c/0x67
> + [<c0102da7>] syscall_call+0x7/0xb
> + DWARF2 unwinder stuck at syscall_call+0x7/0xb
> +
> + Leftover inexact backtrace:
> +
> + =======================
>
> the complete logs are attached
>
>
> gruss
> mlo
> --
> Dipl.-Ing. Martin Lorenz
>
> They that can give up essential liberty
> to obtain a little temporary safety
> deserve neither liberty nor safety.
> Benjamin Franklin
>
> please encrypt your mail to me
> GnuPG key-ID: F1AAD37D
> get it here:
> http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
>
> ICQ UIN: 33588107
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
Oct 6 00:18:59 gimli -- MARK --
Oct 6 00:38:59 gimli -- MARK --
Oct 6 00:58:59 gimli -- MARK --
Oct 6 01:18:59 gimli -- MARK --
Oct 6 01:38:59 gimli -- MARK --
Oct 6 01:58:59 gimli -- MARK --
Oct 6 02:18:59 gimli -- MARK --
Oct 6 02:38:59 gimli -- MARK --
Oct 6 02:58:59 gimli -- MARK --
Oct 6 03:18:59 gimli -- MARK --
Oct 6 03:38:59 gimli -- MARK --
Oct 6 03:58:59 gimli -- MARK --
Oct 6 04:18:59 gimli -- MARK --
Oct 6 04:38:59 gimli -- MARK --
Oct 6 04:58:59 gimli -- MARK --
Oct 6 05:18:59 gimli -- MARK --
Oct 6 05:38:59 gimli -- MARK --
Oct 6 05:58:59 gimli -- MARK --
Oct 6 06:18:59 gimli -- MARK --
Oct 6 06:38:59 gimli -- MARK --
Oct 6 06:58:59 gimli -- MARK --
Oct 6 07:18:59 gimli -- MARK --
Oct 6 07:39:00 gimli -- MARK --
Oct 6 07:40:56 gimli kernel: [40965.057000] e1000: eth0: e1000_watchdog: NIC Link is Down
Oct 6 07:40:59 gimli kernel: [40968.313000] smapi smapi: set_real_thresh: set start to 39 for bat=0
Oct 6 07:40:59 gimli kernel: [40968.518000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
Oct 6 07:41:01 gimli syslogd 1.4.1#19: restart.
Oct 6 07:41:01 gimli kernel: [40970.520000] smapi smapi: set_real_thresh: set start to 39 for bat=0
Oct 6 07:41:02 gimli kernel: [40970.725000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
Oct 6 07:41:03 gimli kernel: [40972.329000] Disabling non-boot CPUs ...
Oct 6 07:41:03 gimli kernel: [40972.335000] Breaking affinity for irq 219
Oct 6 07:41:03 gimli kernel: [40972.437000] CPU 1 is now offline
Oct 6 07:41:03 gimli kernel: [40972.437000] SMP alternatives: switching to UP code
Oct 6 07:51:58 gimli kernel: [40972.453000] CPU1 is down
Oct 6 07:51:58 gimli kernel: [40972.453000] Stopping tasks: ==========================================================================================================================|
Oct 6 07:51:58 gimli kernel: [40972.670000] Suspending console(s)
Oct 6 07:51:58 gimli kernel: [40974.544000] pnp: Device 00:0a disabled.
Oct 6 07:51:58 gimli kernel: [40974.545000] ACPI: PCI interrupt for device 0000:15:00.2 disabled
Oct 6 07:51:58 gimli kernel: [40974.567000] ACPI: PCI interrupt for device 0000:15:00.0 disabled
Oct 6 07:51:58 gimli kernel: [40974.613000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
Oct 6 07:51:58 gimli kernel: [40974.626000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
Oct 6 07:51:58 gimli kernel: [40974.637000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Oct 6 07:51:58 gimli kernel: [40974.749000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
Oct 6 07:51:58 gimli kernel: [40974.749000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Oct 6 07:51:58 gimli kernel: [40974.749000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Oct 6 07:51:58 gimli kernel: [40974.749000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Oct 6 07:51:58 gimli kernel: [40974.751000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Oct 6 07:51:58 gimli kernel: [40974.751000] Intel machine check architecture supported.
Oct 6 07:51:58 gimli kernel: [40974.751000] Intel machine check reporting enabled on CPU#0.
Oct 6 07:51:58 gimli kernel: [41625.776000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
Oct 6 07:51:58 gimli kernel: [41625.776000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
Oct 6 07:51:58 gimli kernel: [41625.794000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
Oct 6 07:51:58 gimli kernel: [41625.794000] usb usb1: root hub lost power or was reset
Oct 6 07:51:58 gimli kernel: [41625.794000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
Oct 6 07:51:58 gimli kernel: [41625.794000] usb usb2: root hub lost power or was reset
Oct 6 07:51:58 gimli kernel: [41625.794000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
Oct 6 07:51:58 gimli kernel: [41625.794000] usb usb3: root hub lost power or was reset
Oct 6 07:51:58 gimli kernel: [41625.794000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23
Oct 6 07:51:58 gimli kernel: [41625.794000] usb usb4: root hub lost power or was reset
Oct 6 07:51:58 gimli kernel: [41625.805000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
Oct 6 07:51:58 gimli kernel: [41625.817000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
Oct 6 07:51:58 gimli kernel: [41626.829000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
Oct 6 07:51:58 gimli kernel: [41626.872000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
Oct 6 07:51:58 gimli kernel: [41626.925000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22
Oct 6 07:51:58 gimli kernel: [41626.936000] pnp: Device 00:08 does not support activation.
Oct 6 07:51:58 gimli kernel: [41626.936000] pnp: Device 00:09 does not support activation.
Oct 6 07:51:58 gimli kernel: [41626.937000] pnp: Device 00:0a activated.
Oct 6 07:51:58 gimli kernel: [41627.121000] ata2: SATA link down (SStatus 0 SControl 0)
Oct 6 07:51:58 gimli kernel: [41627.121000] ata3: SATA link down (SStatus 0 SControl 0)
Oct 6 07:51:58 gimli kernel: [41627.121000] ata4: SATA link down (SStatus 0 SControl 0)
Oct 6 07:51:58 gimli kernel: [41627.466000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
Oct 6 07:51:58 gimli kernel: [41627.568000] smapi smapi: set_real_thresh: set start to 39 for bat=0
Oct 6 07:51:58 gimli kernel: [41627.670000] smapi smapi: set_real_thresh: set stop to 0 for bat=1
Oct 6 07:51:58 gimli kernel: [41627.772000] smapi smapi: set_real_thresh: set start to 95 for bat=1
Oct 6 07:51:58 gimli kernel: [41627.773000] Restarting tasks...<6>usb 4-1: USB disconnect, address 2
Oct 6 07:51:58 gimli kernel: [41627.813000] done
Oct 6 07:51:58 gimli kernel: [41627.813000] Enabling non-boot CPUs ...
Oct 6 07:51:58 gimli kernel: [41627.821000] SMP alternatives: switching to SMP code
Oct 6 07:51:58 gimli kernel: [41627.821000] Booting processor 1/1 eip 3000
Oct 6 07:51:58 gimli kernel: [41627.832000] Initializing CPU#1
Oct 6 07:51:58 gimli kernel: [41627.893000] Calibrating delay using timer specific routine.. 3325.05 BogoMIPS (lpj=1662528)
Oct 6 07:51:58 gimli kernel: [41627.893000] monitor/mwait feature present.
Oct 6 07:51:58 gimli kernel: [41627.893000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 6 07:51:58 gimli kernel: [41627.893000] CPU: L2 cache: 2048K
Oct 6 07:51:58 gimli kernel: [41627.893000] CPU: Physical Processor ID: 0
Oct 6 07:51:58 gimli kernel: [41627.893000] CPU: Processor Core ID: 1
Oct 6 07:51:58 gimli kernel: [41627.893000] Intel machine check architecture supported.
Oct 6 07:51:58 gimli kernel: [41627.893000] Intel machine check reporting enabled on CPU#1.
Oct 6 07:51:58 gimli kernel: [41627.893000] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08
Oct 6 07:51:58 gimli kernel: [41627.903000] CPU1 is up
Oct 6 07:51:58 gimli kernel: [41627.946000] usb 4-2: USB disconnect, address 3
Oct 6 07:51:58 gimli kernel: [41628.203000] usb 4-2: new full speed USB device using uhci_hcd and address 4
Oct 6 07:51:58 gimli kernel: [41628.336000] ata1: waiting for device to spin up (7 secs)
Oct 6 07:51:58 gimli kernel: [41628.368000] usb 4-2: configuration #1 chosen from 1 choice
Oct 6 07:51:59 gimli kernel: [41628.860000] usb 4-1: new full speed USB device using uhci_hcd and address 5
Oct 6 07:51:59 gimli kernel: [41629.071000] usb 4-1: configuration #1 chosen from 1 choice
Oct 6 07:52:06 gimli kernel: [41635.918000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 6 07:52:06 gimli kernel: [41635.922000] ata1.00: configured for UDMA/100
Oct 6 07:52:06 gimli kernel: [41635.923000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Oct 6 07:52:06 gimli kernel: [41635.923000] sda: Write Protect is off
Oct 6 07:52:06 gimli kernel: [41635.923000] SCSI device sda: drive cache: write back
Oct 6 08:05:53 gimli kernel: [42463.057000] Disabling non-boot CPUs ...
Oct 6 08:05:53 gimli kernel: [42463.166000] CPU 1 is now offline
Oct 6 08:05:53 gimli kernel: [42463.166000] SMP alternatives: switching to UP code
Oct 6 08:38:40 gimli kernel: [42463.172000] CPU1 is down
Oct 6 08:38:40 gimli kernel: [42463.172000] Stopping tasks: ====================================================================================================================|
Oct 6 08:38:40 gimli kernel: [42463.202000] Suspending console(s)
Oct 6 08:38:40 gimli kernel: [42465.104000] pnp: Device 00:0a disabled.
Oct 6 08:38:40 gimli kernel: [42465.104000] ACPI: PCI interrupt for device 0000:15:00.2 disabled
Oct 6 08:38:40 gimli kernel: [42465.126000] ACPI: PCI interrupt for device 0000:15:00.0 disabled
Oct 6 08:38:40 gimli kernel: [42465.170000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
Oct 6 08:38:40 gimli kernel: [42465.183000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
Oct 6 08:38:40 gimli kernel: [42465.194000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Oct 6 08:38:40 gimli kernel: [42465.305000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
Oct 6 08:38:40 gimli kernel: [42465.305000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Oct 6 08:38:40 gimli kernel: [42465.305000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Oct 6 08:38:40 gimli kernel: [42465.305000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Oct 6 08:38:40 gimli kernel: [42465.307000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Oct 6 08:38:40 gimli kernel: [42465.307000] Intel machine check architecture supported.
Oct 6 08:38:40 gimli kernel: [42465.307000] Intel machine check reporting enabled on CPU#0.
Oct 6 08:38:40 gimli kernel: [44428.926000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
Oct 6 08:38:40 gimli kernel: [44428.926000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
Oct 6 08:38:40 gimli kernel: [44428.944000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
Oct 6 08:38:40 gimli kernel: [44428.944000] usb usb1: root hub lost power or was reset
Oct 6 08:38:40 gimli kernel: [44428.944000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
Oct 6 08:38:40 gimli kernel: [44428.944000] usb usb2: root hub lost power or was reset
Oct 6 08:38:40 gimli kernel: [44428.944000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
Oct 6 08:38:40 gimli kernel: [44428.944000] usb usb3: root hub lost power or was reset
Oct 6 08:38:40 gimli kernel: [44428.944000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23
Oct 6 08:38:40 gimli kernel: [44428.944000] usb usb4: root hub lost power or was reset
Oct 6 08:38:40 gimli kernel: [44429.255000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
Oct 6 08:38:40 gimli kernel: [44429.266000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
Oct 6 08:38:40 gimli kernel: [44430.278000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
Oct 6 08:38:40 gimli kernel: [44430.321000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
Oct 6 08:38:40 gimli kernel: [44430.374000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22
Oct 6 08:38:40 gimli kernel: [44430.385000] pnp: Device 00:08 does not support activation.
Oct 6 08:38:40 gimli kernel: [44430.385000] pnp: Device 00:09 does not support activation.
Oct 6 08:38:40 gimli kernel: [44430.386000] pnp: Device 00:0a activated.
Oct 6 08:38:40 gimli kernel: [44430.570000] ata2: SATA link down (SStatus 0 SControl 0)
Oct 6 08:38:40 gimli kernel: [44430.570000] ata3: SATA link down (SStatus 0 SControl 0)
Oct 6 08:38:40 gimli kernel: [44430.570000] ata4: SATA link down (SStatus 0 SControl 0)
Oct 6 08:38:40 gimli kernel: [44430.909000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
Oct 6 08:38:40 gimli kernel: [44431.011000] smapi smapi: set_real_thresh: set start to 39 for bat=0
Oct 6 08:38:40 gimli kernel: [44431.113000] smapi smapi: set_real_thresh: set stop to 0 for bat=1
Oct 6 08:38:40 gimli kernel: [44431.215000] smapi smapi: set_real_thresh: set start to 95 for bat=1
Oct 6 08:38:40 gimli kernel: [44431.216000] Restarting tasks...<6>usb 4-1: USB disconnect, address 5
Oct 6 08:38:40 gimli kernel: [44431.272000] done
Oct 6 08:38:40 gimli kernel: [44431.272000] Enabling non-boot CPUs ...
Oct 6 08:38:40 gimli kernel: [44431.276000] SMP alternatives: switching to SMP code
Oct 6 08:38:40 gimli kernel: [44431.276000] Booting processor 1/1 eip 3000
Oct 6 08:38:40 gimli kernel: [44431.287000] Initializing CPU#1
Oct 6 08:38:40 gimli kernel: [44431.348000] Calibrating delay using timer specific routine.. 3325.05 BogoMIPS (lpj=1662529)
Oct 6 08:38:40 gimli kernel: [44431.348000] monitor/mwait feature present.
Oct 6 08:38:40 gimli kernel: [44431.348000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 6 08:38:40 gimli kernel: [44431.348000] CPU: L2 cache: 2048K
Oct 6 08:38:40 gimli kernel: [44431.348000] CPU: Physical Processor ID: 0
Oct 6 08:38:40 gimli kernel: [44431.348000] CPU: Processor Core ID: 1
Oct 6 08:38:40 gimli kernel: [44431.348000] Intel machine check architecture supported.
Oct 6 08:38:40 gimli kernel: [44431.348000] Intel machine check reporting enabled on CPU#1.
Oct 6 08:38:40 gimli kernel: [44431.348000] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08
Oct 6 08:38:40 gimli kernel: [44431.375000] usb 4-2: USB disconnect, address 4
Oct 6 08:38:41 gimli kernel: [44431.632000] usb 4-2: new full speed USB device using uhci_hcd and address 6
Oct 6 08:38:41 gimli kernel: [44431.791000] ata1: waiting for device to spin up (7 secs)
Oct 6 08:38:41 gimli kernel: [44431.796000] usb 4-2: configuration #1 chosen from 1 choice
Oct 6 08:38:41 gimli kernel: [44432.252000] usb 4-1: new full speed USB device using uhci_hcd and address 7
Oct 6 08:38:41 gimli kernel: [44432.411000] usb 4-1: configuration #1 chosen from 1 choice
Oct 6 08:38:49 gimli kernel: [44436.352000] CPU1 is up
Oct 6 08:38:49 gimli kernel: [44439.775000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 6 08:38:49 gimli kernel: [44439.779000] ata1.00: configured for UDMA/100
Oct 6 08:38:49 gimli kernel: [44439.780000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Oct 6 08:38:49 gimli kernel: [44439.780000] sda: Write Protect is off
Oct 6 08:38:49 gimli kernel: [44439.780000] SCSI device sda: drive cache: write back
Oct 6 08:38:57 gimli kernel: [44447.805000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
Oct 6 08:38:57 gimli kernel: [44447.805000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Oct 6 08:39:06 gimli kernel: [44457.180000] smapi smapi: set_real_thresh: set start to 39 for bat=0
Oct 6 08:39:06 gimli kernel: [44457.385000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
Oct 6 08:39:08 gimli syslogd 1.4.1#19: restart.
Oct 6 08:39:09 gimli kernel: [44459.469000] smapi smapi: set_real_thresh: set start to 39 for bat=0
Oct 6 08:39:09 gimli kernel: [44459.673000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
Oct 6 08:40:48 gimli kernel: [44557.191000] e1000: eth0: e1000_watchdog: NIC Link is Down
Oct 6 08:40:54 gimli kernel: [44563.109000] BUG: warning at drivers/pci/msi.c:680/pci_enable_msi()
Oct 6 08:40:54 gimli kernel: [44563.109000] [<c0103bbd>] dump_trace+0x69/0x1af
Oct 6 08:40:54 gimli kernel: [44563.109000] [<c0103d1b>] show_trace_log_lvl+0x18/0x2c
Oct 6 08:40:54 gimli kernel: [44563.109000] [<c01043ba>] show_trace+0xf/0x11
Oct 6 08:40:54 gimli kernel: [44563.109000] [<c01044bd>] dump_stack+0x15/0x17
Oct 6 08:40:54 gimli kernel: [44563.109000] [<c0208d36>] pci_enable_msi+0x78/0x22e
Oct 6 08:40:54 gimli kernel: [44563.110000] [<c025808b>] e1000_open+0x64/0x176
Oct 6 08:40:54 gimli kernel: [44563.111000] [<c029b281>] dev_open+0x2b/0x62
Oct 6 08:40:54 gimli kernel: [44563.112000] [<c0299d8f>] dev_change_flags+0x47/0xe4
Oct 6 08:40:54 gimli kernel: [44563.113000] [<c02cde47>] devinet_ioctl+0x252/0x556
Oct 6 08:40:54 gimli kernel: [44563.114000] [<c0290ffa>] sock_ioctl+0x19e/0x1c2
Oct 6 08:40:54 gimli kernel: [44563.115000] [<c01697df>] do_ioctl+0x1f/0x62
Oct 6 08:40:54 gimli kernel: [44563.115000] [<c0169a67>] vfs_ioctl+0x245/0x257
Oct 6 08:40:54 gimli kernel: [44563.115000] [<c0169ac5>] sys_ioctl+0x4c/0x67
Oct 6 08:40:54 gimli kernel: [44563.116000] [<c0102da7>] syscall_call+0x7/0xb
Oct 6 08:40:54 gimli kernel: [44563.116000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
Oct 6 08:40:54 gimli kernel: [44563.116000]
Oct 6 08:40:54 gimli kernel: [44563.116000] Leftover inexact backtrace:
Oct 6 08:40:54 gimli kernel: [44563.116000]
Oct 6 08:40:54 gimli kernel: [44563.116000] =======================
Oct 6 08:43:22 gimli kernel: [44711.149000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
Oct 6 08:43:22 gimli kernel: [44711.149000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Oct 6 08:48:39 gimli kernel: [45028.144000] tp_smapi unloaded.
Oct 6 08:48:39 gimli kernel: [45028.144000] thinkpad_ec: unloaded.
Oct 6 08:48:52 gimli kernel: [45041.621000] thinkpad_ec: thinkpad_ec 0.30 loaded.
Oct 6 08:48:52 gimli kernel: [45041.623000] tp_smapi 0.30 loading...
Oct 6 08:48:52 gimli kernel: [45041.624000] tp_smapi successfully loaded (smapi_port=0xb2).
Oct 6 08:49:04 gimli kernel: [45053.568000] tp_smapi unloaded.
Oct 6 08:49:04 gimli kernel: [45053.568000] thinkpad_ec: unloaded.
Oct 6 08:49:09 gimli kernel: [45058.156000] ACPI Exception (evxface-0545): AE_BAD_PARAMETER, Removing notify handler [20060707]
Oct 6 08:49:13 gimli kernel: [45062.218000] thinkpad_ec: thinkpad_ec 0.30 loaded.
Oct 6 08:49:13 gimli kernel: [45062.220000] tp_smapi 0.30 loading...
Oct 6 08:49:13 gimli kernel: [45062.220000] tp_smapi successfully loaded (smapi_port=0xb2).
Oct 6 08:49:16 gimli kernel: [45065.464000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
Oct 6 08:49:16 gimli kernel: [45065.464000] ibm_acpi: http://ibm-acpi.sf.net/
Oct 6 09:02:33 gimli -- MARK --
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
