Any pointers would be most helpful!
I've never had to trace down a kernel panic before please forgive me if I
don't provide enough initial info... we've had these same type panics using
kernel: 2.6.15-1.2054_FC5 also...
I tried to use ksymoops like this: ./ksymoops -o
/lib/modules/2.6.17-1.2187_FC5 -m /boot/System.map-2.6.17-1.2187_FC5 -l
/tmp/proc-modules-copy -k /proc/kallsyms < panic.txt
RESULTED IN... (but I probably did it wrong)
ksymoops 2.4.11 on x86_64 2.6.17-1.2187_FC5. Options used
-V (default)
-k /proc/kallsyms (specified)
-l /tmp/proc-modules-copy (specified)
-o /lib/modules/2.6.17-1.2187_FC5 (specified)
-m /boot/System.map-2.6.17-1.2187_FC5 (specified)
Warning (read_ksyms): no kernel symbols in ksyms, is /proc/kallsyms a valid
ksyms file?
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Call Trace: <IRQ> <ffffffff8804aa78> {:aacraid:acc_rkt_intr+55}
<ffffffff80210809> {handle_IRQ_event+41} <ffffffff802b2c73> {__do_IRQ+154}
<ffffffff802713c6> {do_IRQ+60} <ffffffff80262eea> {ret_from_intr+0} <EOI>
Code: 0f 0b 68 64 c3 04 88 c2 b4 00 48 8b 85 80 00 00 00 48 8b 50
Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64
Code; 0000000000000000 Before first symbol
0000000000000000 <_RIP>:
Code; 0000000000000000 Before first symbol
0: 0f 0b ud2a
Code; 0000000000000002 Before first symbol
2: 68 64 c3 04 88 pushq $0xffffffff8804c364
Code; 0000000000000007 Before first symbol
7: c2 b4 00 retq $0xb4
Code; 000000000000000a Before first symbol
a: 48 8b 85 80 00 00 00 mov 0x80(%rbp),%rax
Code; 0000000000000011 Before first symbol
11: 48 8b 50 00 mov 0x0(%rax),%rdx
Call Trace: <IRQ. <ffffffff8028fcd2> {panic+483} <ffffffff802408ad>
{lock_timer_base+27} <ffffffff8021d333> {__mod_timer+176} <ffffffff803478b9>
{vgacon_blank+428} <ffffffff80269d8e> {spin_lock_irqsave+9}
<ffffffff803471e9> {vgacon_set_cursor_size+54} <ffffffff8026a43e>
{oops_end+81} <ffffffff80270715> {die+58} <ffffffff80270cbc>
{do_invalid_op+173} <ffffffff8804996d> {:aacraid:aac_intr_normal+473}
<ffffffff80290543> {printk+82} <ffffffff802638a5> {error_exit+0}
<ffffffff8804996d> {:aacraid:aac_intr_normal+473} <ffffffff804aa78>
{:aacraid:aac_rkt_intr+55} <ffffffff80210809> {handle_IRQ_event+4}
<ffffffff802b2c73> {__do_IRQ+154} <ffffffff802713c6> {do_IRQ+60}
<ffffffff80262eea> {ret_from_intr+0} <EOI>
1 warning issued. Results may not be reliable.
-------------------------------------------------- RAID DMESG
----------------------------------------------------------------
This is from DMESG and the Console Panic message is below...
ACPI wakeup devices:
USB0 USB1 Z000 Z002 Z003 Z004 Z005 Z006
ACPI: (supports S0 S1 S5)
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data: 919k
SCSI subsystem initialized
Adaptec aacraid driver (1.1-5[2409]-mh1)
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 24 (level, low) -> IRQ 209
AAC0: kernel 5.1-0[8832]
AAC0: monitor 5.1-0[8832]
AAC0: bios 5.1-0[8832]
AAC0: serial 16fe14
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi0 : aacraid
Vendor: Adaptec Model: VOLUME 0 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 286492672 512-byte hdwr sectors (146684 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 286492672 512-byte hdwr sectors (146684 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi removable disk sda
Vendor: Adaptec Model: ARRAY 0 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1171431424 512-byte hdwr sectors (599773 MB)
sdb: assuming Write Enabled
sdb: assuming drive cache: write through
SCSI device sdb: 1171431424 512-byte hdwr sectors (599773 MB)
sdb: assuming Write Enabled
sdb: assuming drive cache: write through
sdb: sdb1 sdb2 sdb3
sd 0:0:1:0: Attached scsi removable disk sdb
Vendor: SEAGATE Model: ST3146707LC Rev: 0003
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST3300007LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST3300007LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST3300007LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SDR Model: GEM318P Rev: 1
Type: Processor ANSI SCSI revision: 02
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
------------------------------- FROM THE CONSOLE - the Kernel Panic
--------------------------------
Call Trace: <IRQ> <ffffffff8804aa78> {:aacraid:acc_rkt_intr+55}
<ffffffff80210809> {handle_IRQ_event+41} <ffffffff802b2c73> {__do_IRQ+154}
<ffffffff802713c6> {do_IRQ+60} <ffffffff80262eea> {ret_from_intr+0} <EOI>
Code: 0f 0b 68 64 c3 04 88 c2 b4 00 48 8b 85 80 00 00 00 48 8b 50 RIP
<ffffffff8804996d> {:aacraid:aac_intr_normal+473} RSP<ffff810100133ec8> <0>
Kernal panic - not syncing: Oops
BUG: warning at Kernal/panic.c:137/panic() (Not tainted)
Call Trace: <IRQ. <ffffffff8028fcd2> {panic+483} <ffffffff802408ad>
{lock_timer_base+27} <ffffffff8021d333> {__mod_timer+176} <ffffffff803478b9>
{vgacon_blank+428} <ffffffff80269d8e> {spin_lock_irqsave+9}
<ffffffff803471e9> {vgacon_set_cursor_size+54} <ffffffff8026a43e>
{oops_end+81} <ffffffff80270715> {die+58} <ffffffff80270cbc>
{do_invalid_op+173} <ffffffff8804996d> {:aacraid:aac_intr_normal+473}
<ffffffff80290543> {printk+82} <ffffffff802638a5> {error_exit+0}
<ffffffff8804996d> {:aacraid:aac_intr_normal+473} <ffffffff804aa78>
{:aacraid:aac_rkt_intr+55} <ffffffff80210809> {handle_IRQ_event+4}
<ffffffff802b2c73> {__do_IRQ+154} <ffffffff802713c6> {do_IRQ+60}
<ffffffff80262eea> {ret_from_intr+0} <EOI>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
