On Mon, 2006-10-02 at 16:22 -0700, Andrew Morton wrote:
..
> yes, this is probably the insert-ioapics-and-local-apic-into-resource-map
> patch. Does mainline crash too? It should. Or at least, it should have
> the same resource allocation errors.
Here is the update. I took -mm2 and backed out that patch. Networking
came up fine. But I still get panic on shutdown :(
I tried -mm3 and got a panic on boot (so can't really test it).
do_IRQ: cannot handle IRQ -1
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at arch/x86_64/kernel/irq.c:118
invalid opcode: 0000 [1] SMP
last sysfs file: /block/sdo/size
CPU 0
Modules linked in: sg sd_mod qla2xxx firmware_class scsi_transport_fc
scsi_mod acpi_cpufreq ipv6 thermal processor fan button battery ac
dm_mod floppy parport_pc lp parport
Pid: 30830, comm: init Not tainted 2.6.18-mm2 #3
RIP: 0010:[<ffffffff8020ced0>] [<ffffffff8020ced0>] do_IRQ+0x60/0xb0
RSP: 0018:ffffffff80733e58 EFLAGS: 00010092
RAX: 0000000000000020 RBX: 00000000ffffffff RCX: ffffffff805f3768
RDX: ffffffff805f3768 RSI: 0000000000000082 RDI: ffffffff805f3760
RBP: ffffffff80733e68 R08: 0000000000000000 R09: ffff81018013fc20
R10: ffffffffffffffff R11: 0000000000000000 R12: ffffffff80733e58
R13: ffff8101c7b63b98 R14: 0000000000000000 R15: 0000000000000004
FS: 000000000058b850(0063) GS:ffffffff80676000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000463f00 CR3: 00000001ccdd4000 CR4: 00000000000006e0
Process init (pid: 30830, threadinfo ffff8101c7b62000, task
ffff8101d14b2780)
Stack: ffff810175e2a800 0000000000000000 ffffffff80733e80
ffffffff8020a141
ffffffff80733e80 ffffffff80733f48 0000000000000016 0000000008000000
00000000000000a7 ffffffff8073d418 0000000000000000 00000000000009a7
Call Trace:
[<ffffffff8020a141>] ret_from_intr+0x0/0xa
[<ffffffff803e1c61>] serial8250_interrupt+0x1/0x100
[<ffffffff80255e03>] handle_IRQ_event+0x33/0x70
[<ffffffff8025777c>] handle_edge_irq+0x10c/0x160
[<ffffffff8020cf00>] do_IRQ+0x90/0xb0
[<ffffffff8020a141>] ret_from_intr+0x0/0xa
[<ffffffff804da62c>] _spin_unlock_irqrestore+0xc/0x10
[<ffffffff803e1b39>] serial8250_startup+0x539/0x5c0
[<ffffffff803dc9fd>] uart_startup+0x8d/0x170
[<ffffffff803dce21>] uart_open+0x221/0x520
[<ffffffff803c4ece>] tty_open+0x1ce/0x3b0
[<ffffffff80285762>] chrdev_open+0x182/0x1d0
[<ffffffff802806c1>] __dentry_open+0xf1/0x210
[<ffffffff8028088d>] nameidata_to_filp+0x2d/0x50
[<ffffffff802808e9>] do_filp_open+0x39/0x50
[<ffffffff8028095a>] do_sys_open+0x5a/0xf0
[<ffffffff80280a1b>] sys_open+0x1b/0x20
[<ffffffff80209c2e>] system_call+0x7e/0x83
[<0000000000416e22>]
>
> I've backed that out and applied an updated version. My current rollup
> (which actually seems to mostly compile now) is at
>
> http://userweb.kernel.org/~akpm/badari.bz2
>
> That's against 2.6.18. Can you see if that fixes things?
I am going to try it now..
Thanks,
Badari
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
