Add a broken-on-64bit option, similar to the existing broken-on-smp
config option. This is just the first pass, marking the obvious
candidates.
Several driver have been marked as dependent on CONFIG_32BIT in the
past, when they should really be dependent on this new
CONFIG_BROKEN_ON_64BIT option, because the 32BIT marker was due to bugs
rather than fundamentals.
Signed-off-by: Jeff Garzik <[email protected]>
drivers/atm/Kconfig | 2 +-
drivers/char/ftape/Kconfig | 2 +-
drivers/isdn/capi/Kconfig | 4 ++--
drivers/isdn/hardware/eicon/Kconfig | 2 +-
drivers/isdn/hisax/Kconfig | 1 +
drivers/message/i2o/Kconfig | 2 +-
drivers/net/irda/Kconfig | 2 +-
drivers/scsi/megaraid/Kconfig.megaraid | 2 +-
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
init/Kconfig | 5 +++++
sound/oss/Kconfig | 10 +++++-----
11 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index cfa5af8..36c0fd7 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -139,7 +139,7 @@ config ATM_ENI_BURST_RX_2W
config ATM_FIRESTREAM
tristate "Fujitsu FireStream (FS50/FS155) "
- depends on PCI && ATM
+ depends on PCI && ATM && BROKEN_ON_64BIT
help
Driver for the Fujitsu FireStream 155 (MB86697) and
FireStream 50 (MB86695) ATM PCI chips.
diff --git a/drivers/char/ftape/Kconfig b/drivers/char/ftape/Kconfig
index 0d65189..13c9460 100644
--- a/drivers/char/ftape/Kconfig
+++ b/drivers/char/ftape/Kconfig
@@ -56,7 +56,7 @@ comment "The compressor will be built as
config ZFT_COMPRESSOR
tristate
- depends on FTAPE!=n && ZFTAPE!=n
+ depends on FTAPE!=n && ZFTAPE!=n && BROKEN_ON_64BIT
default m
config FT_NR_BUFFERS
diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index 8b6c9a4..064b7bb 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -21,7 +21,7 @@ config ISDN_CAPI_MIDDLEWARE
config ISDN_CAPI_CAPI20
tristate "CAPI2.0 /dev/capi support"
- depends on ISDN_CAPI
+ depends on ISDN_CAPI && BROKEN_ON_64BIT
help
This option will provide the CAPI 2.0 interface to userspace
applications via /dev/capi20. Applications should use the
@@ -44,7 +44,7 @@ config ISDN_CAPI_CAPIFS
config ISDN_CAPI_CAPIDRV
tristate "CAPI2.0 capidrv interface support"
- depends on ISDN_CAPI && ISDN_I4L
+ depends on ISDN_CAPI && ISDN_I4L && BROKEN_ON_64BIT
help
This option provides the glue code to hook up CAPI driven cards to
the legacy isdn4linux link layer. If you have a card which is
diff --git a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig
index 51e66bc..d41e99d 100644
--- a/drivers/isdn/hardware/eicon/Kconfig
+++ b/drivers/isdn/hardware/eicon/Kconfig
@@ -32,7 +32,7 @@ config ISDN_DIVAS_PRIPCI
config ISDN_DIVAS_DIVACAPI
tristate "DIVA CAPI2.0 interface support"
- depends on ISDN_DIVAS && ISDN_CAPI
+ depends on ISDN_DIVAS && ISDN_CAPI && BROKEN_ON_64BIT
help
You need this to provide the CAPI interface
for DIVA Server cards.
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6dfc941..b78abd8 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -4,6 +4,7 @@ menu "Passive cards"
config ISDN_DRV_HISAX
tristate "HiSax SiemensChipSet driver support"
+ depends on BROKEN_ON_64BIT
select CRC_CCITT
---help---
This is a driver supporting the Siemens chipset on various
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index 6443392..0e135ce 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -56,7 +56,7 @@ config I2O_EXT_ADAPTEC_DMA64
config I2O_CONFIG
tristate "I2O Configuration support"
- depends on I2O
+ depends on I2O && BROKEN_ON_64BIT
---help---
Say Y for support of the configuration interface for the I2O adapters.
If you have a RAID controller from Adaptec and you want to use the
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 7c8ccc0..f8cf8e1 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -145,7 +145,7 @@ comment "Old SIR device drivers"
config IRPORT_SIR
tristate "IrPORT (IrDA serial driver)"
- depends on IRDA && BROKEN_ON_SMP
+ depends on IRDA && BROKEN_ON_SMP && BROKEN_ON_64BIT
---help---
Say Y here if you want to build support for the IrPORT IrDA device
driver. To compile it as a module, choose M here: the module will be
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 17419e3..6227125 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -66,7 +66,7 @@ config MEGARAID_MAILBOX
config MEGARAID_LEGACY
tristate "LSI Logic Legacy MegaRAID Driver"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN_ON_64BIT
help
This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters. This driver also support the all U320
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 7603cbe..b6cc15c 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -1,7 +1,7 @@
config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
- depends on USB && USB_EHCI_HCD
+ depends on USB && USB_EHCI_HCD && BROKEN_ON_64BIT
---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
diff --git a/init/Kconfig b/init/Kconfig
index f7a04d0..6bd3dc3 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -47,6 +47,11 @@ config BROKEN_ON_SMP
depends on BROKEN || !SMP
default y
+config BROKEN_ON_64BIT
+ bool
+ depends on BROKEN || !64BIT
+ default y
+
config LOCK_KERNEL
bool
depends on SMP || PREEMPT
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 97e38b6..724a3db 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -63,7 +63,7 @@ config MIDI_EMU10K1
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
+ depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER && BROKEN_ON_64BIT
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
@@ -509,7 +509,7 @@ config SOUND_CS4232
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && BROKEN_ON_64BIT
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
@@ -584,7 +584,7 @@ config SOUND_MSS
config SOUND_MPU401
tristate "MPU-401 support (NOT for SB16)"
- depends on SOUND_OSS
+ depends on SOUND_OSS && BROKEN_ON_64BIT
---help---
Be careful with this question. The MPU401 interface is supported by
all sound cards. However, some natively supported cards have their
@@ -634,7 +634,7 @@ config PAS_JOYSTICK
config SOUND_PSS
tristate "PSS (AD1848, ADSP-2115, ESC614) support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && BROKEN_ON_64BIT
help
Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
@@ -720,7 +720,7 @@ config SOUND_YM3812
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
- depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
+ depends on SOUND_OSS && OSS_OBSOLETE_DRIVER && BROKEN_ON_64BIT
help
Say Y or M if you have a card based on one of these Yamaha sound
chipsets or the "SAx", which is actually a SA3. Read
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]