[ RESEND third time ]
Small updates to make the RTC class Kconfig text be more informative.
This should help folk used to the drivers/char/rtc.c support, or a
single RTC, be slightly less surprised by the differences.
Also, adds a new RTC_DEBUG option to predefine DEBUG in the framework
and its drivers, while debugging. That's getting to be a standard
idiom, and it's pretty useful.
Signed-off-by: David Brownell <[email protected]>
Index: g26/drivers/rtc/Kconfig
===================================================================
--- g26.orig/drivers/rtc/Kconfig 2006-08-19 02:02:45.000000000 -0700
+++ g26/drivers/rtc/Kconfig 2006-08-19 10:08:23.000000000 -0700
@@ -37,6 +37,13 @@ config RTC_HCTOSYS_DEVICE
The RTC device that will be used as the source for
the system time, usually rtc0.
+config RTC_DEBUG
+ bool "RTC debug support"
+ depends on RTC_CLASS = y
+ help
+ Say yes here to enable debugging support in the RTC framework
+ and individual RTC drivers.
+
comment "RTC interfaces"
depends on RTC_CLASS
@@ -45,8 +52,8 @@ config RTC_INTF_SYSFS
depends on RTC_CLASS && SYSFS
default RTC_CLASS
help
- Say yes here if you want to use your RTC using the sysfs
- interface, /sys/class/rtc/rtcX .
+ Say yes here if you want to use your RTCs using sysfs interfaces,
+ /sys/class/rtc/rtc0 through /sys/.../rtcN.
This driver can also be built as a module. If so, the module
will be called rtc-sysfs.
@@ -56,8 +63,9 @@ config RTC_INTF_PROC
depends on RTC_CLASS && PROC_FS
default RTC_CLASS
help
- Say yes here if you want to use your RTC using the proc
- interface, /proc/driver/rtc .
+ Say yes here if you want to use your first RTC through the proc
+ interface, /proc/driver/rtc. Other RTCs will not be available
+ through that API.
This driver can also be built as a module. If so, the module
will be called rtc-proc.
@@ -67,8 +75,11 @@ config RTC_INTF_DEV
depends on RTC_CLASS
default RTC_CLASS
help
- Say yes here if you want to use your RTC using the dev
- interface, /dev/rtc .
+ Say yes here if you want to use your RTCs using the /dev
+ interfaces, which "udev" sets up as /dev/rtc0 through
+ /dev/rtcN. You may want to set up a symbolic link so one
+ of these can be accessed as /dev/rtc, which is a name
+ expected by "hwclock" and some other programs.
This driver can also be built as a module. If so, the module
will be called rtc-dev.
@@ -78,7 +89,8 @@ config RTC_INTF_DEV_UIE_EMUL
depends on RTC_INTF_DEV
help
Provides an emulation for RTC_UIE if the underlaying rtc chip
- driver did not provide RTC_UIE ioctls.
+ driver does not expose RTC_UIE ioctls. Those requests generate
+ once-per-second update interrupts, used for synchronization.
comment "RTC drivers"
depends on RTC_CLASS
Index: g26/drivers/rtc/Makefile
===================================================================
--- g26.orig/drivers/rtc/Makefile 2006-08-19 10:08:09.000000000 -0700
+++ g26/drivers/rtc/Makefile 2006-08-19 10:09:07.000000000 -0700
@@ -2,6 +2,10 @@
# Makefile for RTC class/drivers.
#
+ifeq ($(CONFIG_RTC_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
+endif
+
obj-$(CONFIG_RTC_LIB) += rtc-lib.o
obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o
obj-$(CONFIG_RTC_CLASS) += rtc-core.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
