Rename the following Kconfig symbols:
* CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL
* CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE
* CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT
Signed-off-by: Haavard Skinnemoen <[email protected]>
---
arch/arm/configs/at91rm9200dk_defconfig | 6 +++---
arch/arm/configs/at91rm9200ek_defconfig | 6 +++---
arch/arm/configs/ateb9200_defconfig | 6 +++---
arch/arm/configs/carmeva_defconfig | 4 ++--
arch/arm/configs/csb337_defconfig | 6 +++---
arch/arm/configs/csb637_defconfig | 6 +++---
arch/arm/configs/kafa_defconfig | 6 +++---
arch/arm/configs/kb9202_defconfig | 4 ++--
arch/arm/configs/onearm_defconfig | 6 +++---
arch/arm/mach-at91rm9200/devices.c | 2 +-
arch/avr32/configs/atstk1002_defconfig | 6 +++---
drivers/serial/Kconfig | 14 +++++++-------
drivers/serial/Makefile | 2 +-
drivers/serial/atmel_serial.c | 6 +++---
include/asm-arm/mach/serial_at91.h | 2 +-
include/asm-avr32/mach/serial_at91.h | 2 +-
16 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 4f3d8d3..c82e466 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -553,9 +553,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 08b5dc3..b983fc5 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -534,9 +534,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index bee7813..15e6b0b 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -656,9 +656,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index 8a075c8..d24ae87 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -455,8 +455,8 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index cf3fa5c..a2d6fd3 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -591,9 +591,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 640d70c..2a1ac6c 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -591,9 +591,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 1db633e..54fcd75 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -536,9 +536,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 45396e0..b4cd4b4 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -418,8 +418,8 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 6a93e3a..cb1d94f 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -583,9 +583,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 4352acb..467ef6d 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -544,7 +544,7 @@ #endif
* UART
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_AT91)
+#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 1d22255..6c2c5e0 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -385,9 +385,9 @@ # CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5b48ac2..4f962de 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -299,17 +299,17 @@ config SERIAL_AMBA_PL011_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
-config SERIAL_AT91
- bool "AT91RM9200 / AT91SAM9261 serial port support"
+config SERIAL_ATMEL
+ bool "AT91 / AT32 on-chip serial port support"
depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
select SERIAL_CORE
help
This enables the driver for the on-chip UARTs of the Atmel
AT91RM9200 and AT91SAM926 processor.
-config SERIAL_AT91_CONSOLE
- bool "Support for console on AT91RM9200 / AT91SAM9261 serial port"
- depends on SERIAL_AT91=y
+config SERIAL_ATMEL_CONSOLE
+ bool "Support for console on AT91 / AT32 serial port"
+ depends on SERIAL_ATMEL=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use a UART on the Atmel AT91RM9200 or
@@ -317,9 +317,9 @@ config SERIAL_AT91_CONSOLE
which receives all kernel messages and warnings and which allows
logins in single user mode).
-config SERIAL_AT91_TTYAT
+config SERIAL_ATMEL_TTYAT
bool "Install as device ttyAT0-4 instead of ttyS0-4"
- depends on SERIAL_AT91=y
+ depends on SERIAL_ATMEL=y
help
Say Y here if you wish to have the five internal AT91RM9200 UARTs
appear as /dev/ttyAT0-4 (major 204, minor 154-158) instead of the
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index e49808a..b4d8a7c 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -54,5 +54,5 @@ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
-obj-$(CONFIG_SERIAL_AT91) += atmel_serial.o
+obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 49a3c7c..e33caa9 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -44,13 +44,13 @@ #include <asm/arch/gpio.h>
#include "atmel_serial.h"
-#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/serial_core.h>
-#ifdef CONFIG_SERIAL_AT91_TTYAT
+#ifdef CONFIG_SERIAL_ATMEL_TTYAT
/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
* should coexist with the 8250 driver, such as if we have an external 16C550
@@ -726,7 +726,7 @@ void __init at91_register_uart_fns(struc
}
-#ifdef CONFIG_SERIAL_AT91_CONSOLE
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
static void at91_console_putchar(struct uart_port *port, int ch)
{
while (!(UART_GET_CSR(port) & AT91_US_TXRDY))
diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h
index 1290bb3..239e1f6 100644
--- a/include/asm-arm/mach/serial_at91.h
+++ b/include/asm-arm/mach/serial_at91.h
@@ -24,7 +24,7 @@ struct at91_port_fns {
void (*close)(struct uart_port *);
};
-#if defined(CONFIG_SERIAL_AT91)
+#if defined(CONFIG_SERIAL_ATMEL)
void at91_register_uart_fns(struct at91_port_fns *fns);
#else
#define at91_register_uart_fns(fns) do { } while (0)
diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h
index 1290bb3..239e1f6 100644
--- a/include/asm-avr32/mach/serial_at91.h
+++ b/include/asm-avr32/mach/serial_at91.h
@@ -24,7 +24,7 @@ struct at91_port_fns {
void (*close)(struct uart_port *);
};
-#if defined(CONFIG_SERIAL_AT91)
+#if defined(CONFIG_SERIAL_ATMEL)
void at91_register_uart_fns(struct at91_port_fns *fns);
#else
#define at91_register_uart_fns(fns) do { } while (0)
--
1.4.1.1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
