Hi, I was looking around /proc/acpi on my system the other day, purely out of curiosity, when I noticed something rather odd. Inside /proc/acpi/video, there are two VID entries, both with the same inode. I guess these are the relevant lines from my dmesg: [ 134.199530] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 134.199927] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 134.199986] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) I'm currently running 2.6.18-rc6, but have verified that it happens as far back as 2.6.13.2. I've attached the full dmesg, along with a copy of my systems (Dell Inspiron 6000) dsdt. Please let me know if there's anything else you need. Please cc me on any replies, as i'm not subscribed to either list. Thanks. -- Jody Belka knew (at) pimb (dot) org
[ 0.000000] Linux version 2.6.18-rc6-local-evms (jmb@atlas) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 PREEMPT Tue Sep 12 14:37:12 BST 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffd3800 (usable) [ 0.000000] BIOS-e820: 000000005ffd3800 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 383MB HIGHMEM available. [ 0.000000] 1152MB LOWMEM available. [ 0.000000] On node 0 totalpages: 393171 [ 0.000000] DMA zone: 4096 pages, LIFO batch:0 [ 0.000000] Normal zone: 290816 pages, LIFO batch:31 [ 0.000000] HighMem zone: 98259 pages, LIFO batch:31 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc9b0 [ 0.000000] ACPI: RSDT (v001 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd3fd3 [ 0.000000] ACPI: FADT (v001 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd4c00 [ 0.000000] ACPI: MADT (v001 DELL CPi R 0x27d50716 ASL 0x00000047) @ 0x5ffd5400 [ 0.000000] ACPI: MCFG (v016 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd53c0 [ 0.000000] ACPI: BOOT (v001 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd4fc0 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x5ffd43e6 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x5ffd420e [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x5ffd4013 [ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) [ 0.000000] Detected 1596.160 MHz processor. [ 9.718354] Built 1 zonelists. Total pages: 393171 [ 9.718357] Kernel command line: root=/dev/evms/dom0/root ro vga=795 quiet splash [ 9.718600] mapped APIC to ffffd000 (fee00000) [ 9.718603] mapped IOAPIC to ffffc000 (fec00000) [ 9.718606] Enabling fast FPU save and restore... done. [ 9.718609] Enabling unmasked SIMD FPU exception support... done. [ 9.718611] Initializing CPU#0 [ 9.718685] CPU 0 irqstacks, hard=b0437000 soft=b0438000 [ 9.718688] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 9.718796] Console: colour dummy device 80x25 [ 9.719710] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) [ 9.720900] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) [ 9.766785] Memory: 1550892k/1572684k available (2016k kernel code, 20504k reserved, 664k data, 284k init, 393036k highmem) [ 9.766789] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.846583] Calibrating delay using timer specific routine.. 3195.56 BogoMIPS (lpj=6391122) [ 9.846612] Security Framework v1.0.0 initialized [ 9.846632] Mount-cache hash table entries: 512 [ 9.846772] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 9.846784] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 9.846794] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.846797] CPU: L2 cache: 2048K [ 9.846800] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 [ 9.846811] Compat vDSO mapped to ffffe000. [ 9.846823] CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 [ 9.846831] Checking 'hlt' instruction... OK. [ 9.862680] ACPI: Core revision 20060707 [ 9.875565] ENABLING IO-APIC IRQs [ 9.875761] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.022559] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 10.189254] Freeing initrd memory: 3074k freed [ 10.189618] NET: Registered protocol family 16 [ 10.189721] EISA bus registered [ 10.189726] ACPI: bus type pci registered [ 10.189733] PCI: Using MMCONFIG [ 10.190461] Setting up standard PCI resources [ 10.208977] ACPI: Interpreter enabled [ 10.208980] ACPI: Using IOAPIC for interrupt routing [ 10.209595] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.209599] PCI: Probing PCI hardware (bus 00) [ 10.209694] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 10.224850] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 10.224855] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 10.224903] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [ 10.225022] Boot video device is 0000:01:00.0 [ 10.225398] PCI: Transparent bridge - 0000:00:1e.0 [ 10.225457] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses') [ 10.225460] Please report the result to linux-kernel to fix this permanently [ 10.225484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.246321] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 10.246593] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 10.246859] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 10.247124] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 10.247376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 10.247632] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 10.247891] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 10.248299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 10.249399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 10.249772] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.249785] pnp: PnP ACPI init [ 10.282308] pnp: PnP ACPI: found 11 devices [ 10.282313] PnPBIOS: Disabled by ACPI PNP [ 10.282428] SCSI subsystem initialized [ 10.282483] PCI: Using ACPI for IRQ routing [ 10.282486] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.299886] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 10.299890] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved [ 10.299893] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved [ 10.299898] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 10.299902] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 10.299905] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 10.299908] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 10.299911] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 10.299914] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 10.299921] pnp: 00:08: ioport range 0x900-0x90f has been reserved [ 10.299924] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 10.299927] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 10.299930] pnp: 00:08: ioport range 0x930-0x93f has been reserved [ 10.299933] pnp: 00:08: ioport range 0x940-0x97f has been reserved [ 10.300130] PCI: Bridge: 0000:00:01.0 [ 10.300132] IO window: d000-dfff [ 10.300136] MEM window: dfd00000-dfefffff [ 10.300139] PREFETCH window: d0000000-d7ffffff [ 10.300147] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 10.300150] IO window: 00002000-000020ff [ 10.300154] IO window: 00002400-000024ff [ 10.300158] PREFETCH window: 68000000-69ffffff [ 10.300162] MEM window: 6a000000-6bffffff [ 10.300166] PCI: Bridge: 0000:00:1e.0 [ 10.300169] IO window: 2000-2fff [ 10.300174] MEM window: dfc00000-dfcfffff [ 10.300178] PREFETCH window: 68000000-69ffffff [ 10.300192] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.300197] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 10.300208] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 10.300222] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 10.300226] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 10.300249] NET: Registered protocol family 2 [ 10.334201] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.334409] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [ 10.335349] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 10.335635] TCP: Hash tables configured (established 262144 bind 65536) [ 10.335639] TCP reno registered [ 10.335835] Simple Boot Flag at 0x79 set to 0x1 [ 10.336535] audit: initializing netlink socket (disabled) [ 10.336548] audit(1159354562.696:1): initialized [ 10.336606] highmem bounce pool size: 64 pages [ 10.336664] VFS: Disk quotas dquot_6.5.1 [ 10.336684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.336732] Initializing Cryptographic API [ 10.336738] io scheduler noop registered [ 10.336743] io scheduler anticipatory registered [ 10.336747] io scheduler deadline registered [ 10.336755] io scheduler cfq registered (default) [ 10.337035] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7680k, total 32768k [ 10.337039] vesafb: mode is 1280x1024x24, linelength=3840, pages=7 [ 10.337042] vesafb: protected mode interface info at c000:581b [ 10.337045] vesafb: pmi: set display start = b00c5889, set palette = b00c58c3 [ 10.337047] vesafb: pmi: ports = de10 de16 de54 de38 de3c de5c de00 de04 deb0 deb2 deb4 [ 10.337054] vesafb: scrolling: redraw [ 10.337058] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 10.410411] Console: switching to colour frame buffer device 160x64 [ 10.478248] fb0: VESA VGA frame buffer device [ 10.478295] isapnp: Scanning for PnP cards... [ 10.788727] isapnp: No Plug & Play device found [ 10.811282] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.812146] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 10.812925] libata version 2.00 loaded. [ 10.812965] ahci 0000:00:1f.2: version 2.0 [ 10.812992] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 10.813009] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 10.813012] ahci: probe of 0000:00:1f.2 failed with error -12 [ 10.813045] ata_piix 0000:00:1f.2: version 2.00 [ 10.813050] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 10.965626] PCI: Enabling device 0000:00:1f.2 (0000 -> 0001) [ 10.965630] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 10.965642] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 10.965687] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 [ 10.965784] scsi0 : ata_piix [ 11.122950] ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA48 [ 11.122953] ata1.00: ata1: dev 0 multi count 8 [ 11.122955] ata1.00: applying bridge limits [ 11.124449] ata1.00: configured for UDMA/100 [ 11.124561] Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O [ 11.124573] Type: Direct-Access ANSI SCSI revision: 05 [ 11.124658] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 [ 11.124673] scsi1 : ata_piix [ 11.433721] ata2.00: ATAPI, max UDMA/33 [ 11.589586] ata2.00: configured for UDMA/33 [ 11.590161] Vendor: SONY Model: DVD+-RW DW-D56A Rev: PDS7 [ 11.590172] Type: CD-ROM ANSI SCSI revision: 05 [ 11.590315] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 11.590326] sda: Write Protect is off [ 11.590329] sda: Mode Sense: 00 3a 00 00 [ 11.590343] SCSI device sda: drive cache: write back [ 11.590388] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 11.590397] sda: Write Protect is off [ 11.590399] sda: Mode Sense: 00 3a 00 00 [ 11.590412] SCSI device sda: drive cache: write back [ 11.590414] sda: sda1 sda2 sda3 [ 11.611772] sd 0:0:0:0: Attached scsi disk sda [ 11.615940] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 11.615944] Uniform CD-ROM driver Revision: 3.20 [ 11.616000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 11.616041] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.616069] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 11.616143] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.619637] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.620085] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.620181] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected] [ 11.620920] EISA: Probing bus 0 at eisa.0 [ 11.620928] Cannot allocate resource for EISA slot 1 [ 11.620931] Cannot allocate resource for EISA slot 2 [ 11.620956] EISA: Detected 0 cards. [ 11.620975] Netfilter messages via NETLINK v0.30. [ 11.621060] TCP bic registered [ 11.621063] NET: Registered protocol family 8 [ 11.621065] NET: Registered protocol family 20 [ 11.621078] Using IPI Shortcut mode [ 11.621133] ACPI: (supports S0 S3 S4 S5) [ 11.621184] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 11.621289] RAMDISK: Compressed image found at block 0 [ 11.625053] Time: tsc clocksource has been installed. [ 11.793547] input: AT Translated Set 2 keyboard as /class/input/input0 [ 11.793603] VFS: Mounted root (ext2 filesystem). [ 12.222792] EXT2-fs warning (device dm-17): ext2_fill_super: mounting ext3 filesystem as ext2 [ 12.547829] Freeing unused kernel memory: 284k freed [ 12.980860] NET: Registered protocol family 1 [ 16.006777] mice: PS/2 mouse device common for all mice [ 16.325446] input: PS/2 Mouse as /class/input/input1 [ 16.347729] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 [ 24.445783] ts: Compaq touchscreen protocol output [ 123.304556] kjournald starting. Commit interval 5 seconds [ 123.304867] EXT3 FS on dm-11, internal journal [ 123.304872] EXT3-fs: mounted filesystem with ordered data mode. [ 123.352255] kjournald starting. Commit interval 5 seconds [ 123.352554] EXT3 FS on dm-13, internal journal [ 123.352558] EXT3-fs: mounted filesystem with ordered data mode. [ 123.356218] kjournald starting. Commit interval 5 seconds [ 123.356536] EXT3 FS on dm-21, internal journal [ 123.356540] EXT3-fs: mounted filesystem with ordered data mode. [ 123.360106] kjournald starting. Commit interval 5 seconds [ 123.360375] EXT3 FS on dm-7, internal journal [ 123.360379] EXT3-fs: mounted filesystem with ordered data mode. [ 123.427622] kjournald starting. Commit interval 5 seconds [ 123.427937] EXT3 FS on dm-9, internal journal [ 123.427941] EXT3-fs: mounted filesystem with ordered data mode. [ 123.431290] kjournald starting. Commit interval 5 seconds [ 123.431571] EXT3 FS on dm-29, internal journal [ 123.431575] EXT3-fs: mounted filesystem with ordered data mode. [ 123.470787] Adding 1048564k swap on /dev/evms/dom0/swap/0. Priority:-1 extents:1 across:1048564k [ 124.969075] Linux agpgart interface v0.101 (c) Dave Jones [ 124.975803] agpgart: Detected an Intel 915GM Chipset. [ 125.008495] agpgart: AGP aperture is 256M @ 0x0 [ 125.163238] usbcore: registered new driver usbfs [ 125.165953] usbcore: registered new driver hub [ 125.199831] USB Universal Host Controller Interface driver v3.0 [ 125.202339] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 125.202353] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 125.202357] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 125.214118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 125.214156] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 125.217880] usb usb1: configuration #1 chosen from 1 choice [ 125.218472] hub 1-0:1.0: USB hub found [ 125.218481] hub 1-0:1.0: 2 ports detected [ 125.320663] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 125.320677] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 125.320681] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 125.339880] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 125.339921] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60 [ 125.343482] usb usb2: configuration #1 chosen from 1 choice [ 125.344179] hub 2-0:1.0: USB hub found [ 125.344189] hub 2-0:1.0: 2 ports detected [ 125.452611] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 125.452626] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 125.452630] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 125.453339] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 125.453374] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40 [ 125.454705] usb usb3: configuration #1 chosen from 1 choice [ 125.455316] hub 3-0:1.0: USB hub found [ 125.455323] hub 3-0:1.0: 2 ports detected [ 125.560600] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 125.560616] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 125.560620] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 125.561327] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 125.561360] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20 [ 125.562689] usb usb4: configuration #1 chosen from 1 choice [ 125.563285] hub 4-0:1.0: USB hub found [ 125.563292] hub 4-0:1.0: 2 ports detected [ 126.057147] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 126.057165] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 126.057170] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 126.063527] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 126.063565] ehci_hcd 0000:00:1d.7: debug port 1 [ 126.063571] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 126.063580] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800 [ 126.067464] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 126.071189] usb usb5: configuration #1 chosen from 1 choice [ 126.071796] hub 5-0:1.0: USB hub found [ 126.071805] hub 5-0:1.0: 8 ports detected [ 126.261866] Intel 82802 RNG detected [ 126.261875] intel_rng: cannot enable RNG, aborting [ 126.261877] intel_rng: RNG registering failed (-5) [ 126.985095] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 126.985124] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 127.801250] intel8x0_measure_ac97_clock: measured 55471 usecs [ 127.801253] intel8x0: clocking to 48000 [ 128.140916] b44.c:v1.01 (Jun 16, 2006) [ 128.140939] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 128.147807] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:e5:f1:e3 [ 128.250444] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188] [ 128.377521] Yenta: ISA IRQ mask 0x04b8, PCI irq 17 [ 128.377527] Socket status: 30000006 [ 128.377530] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 128.377537] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 128.377541] cs: IO port probe 0x2000-0x2fff: clean. [ 128.377806] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff [ 128.377809] pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x69ffffff [ 128.457569] ieee1394: Initialized config rom entry `ip1394' [ 128.464734] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19 [ 128.520656] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 128.596210] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 128.596215] sdhci: Copyright(c) Pierre Ossman [ 128.598807] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17) [ 128.598828] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18 [ 128.611709] mmc0: SDHCI at 0xdfcfc700 irq 18 DMA [ 128.700994] ieee80211_crypt: registered algorithm 'NULL' [ 128.709819] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 128.709823] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 128.725489] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq [ 128.725493] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 128.728127] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 128.728168] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 128.991270] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 129.800742] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0002f116830] [ 130.146613] Real Time Clock Driver v1.12ac [ 130.174862] input: PC Speaker as /class/input/input3 [ 133.615643] ACPI: AC Adapter [AC] (off-line) [ 133.912047] ACPI: Battery Slot [BAT0] (battery present) [ 133.975273] ACPI: Lid Switch [LID] [ 133.975284] ACPI: Power Button (CM) [PBTN] [ 133.975290] ACPI: Sleep Button (CM) [SBTN] [ 134.132071] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 134.132079] ACPI: Processor [CPU0] (supports 8 throttling states) [ 134.132084] ACPI: Getting cpuindex for acpiid 0x1 [ 134.183835] ACPI: Thermal Zone [THM] (54 C) [ 134.199530] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 134.199927] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 134.199986] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 124.548000] Time: acpi_pm clocksource has been installed. [ 131.276000] pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. [ 131.276000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. [ 131.276000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. [ 131.276000] cs: IO port probe 0x100-0x4ff: excluding 0x370-0x377 0x3f0-0x3f7 [ 131.280000] cs: IO port probe 0xc00-0xcf7: clean. [ 131.280000] cs: IO port probe 0xa00-0xaff: clean. [ 132.712000] NET: Registered protocol family 10 [ 132.712000] lo: Disabled Privacy Extensions [ 132.712000] IPv6 over IPv4 tunneling driver [ 132.948000] Bluetooth: Core ver 2.10 [ 132.948000] NET: Registered protocol family 31 [ 132.948000] Bluetooth: HCI device and connection manager initialized [ 132.948000] Bluetooth: HCI socket layer initialized [ 132.976000] Bluetooth: L2CAP ver 2.8 [ 132.976000] Bluetooth: L2CAP socket layer initialized [ 133.012000] Bluetooth: RFCOMM socket layer initialized [ 133.012000] Bluetooth: RFCOMM TTY layer initialized [ 133.012000] Bluetooth: RFCOMM ver 1.8
Attachment:
dsdt
Description: Binary data
- Prev by Date: Re: 2.6.18-mm1 compile failure on x86_64
- Next by Date: Re: revised pda patches
- Previous by thread: [PATCH] zone table removal miss merge
- Next by thread: Re: [PATCH] x86: Add portable getcpu call
- Index(es):
 |