On Thu, 21 Sep 2006 11:32:57 +0800 Luke Yang wrote:
> Hi everyone,
>
> This is the blackfin architecture for 2.6.18, again. As we promised,
> we fixed some issues in our old patches as following.
>
> - use serial core in that driver
>
> - Fix up that ioctl so it a) doesn't sleep in spinlock and b) compiles
>
> - Use generic IRQ framework
>
> - Review all the volatiles, consolidate them in some helper-in-header-file.
>
> And we also fixed a lot of other issues and ported it to 2.6.18 now.
> As usual, this architecture patch is too big so I just give a link
> here. Please review it and give you comments, we really appreciate.
>
> http://blackfin.uclinux.org/frs/download.php/1010/blackfin_arch_2.6.18.patch
Hi,
Here are the rest of my comments (on .c files now).
(Did you also look at my comments inside this file?
http://www.xenotime.net/linux/doc/blackfin-arch-meta.patch )
1. As Arnd commented, eliminate the multiple versions of
DPRINTK() and friends macros. Just use pr_debug() as much as possible.
2. Re-read Documentation/CodingStyle and frame it.
3. There are lots of function descriptions that need only small
changes to be in kernel-doc format
(see Documentation/kernel-doc-nano-HOWTO.txt).
4. Try to keep source lines <= 80 columns.
5. Lots of printk() calls could use some KERN_* levels in them.
Details below.
---
~Randy
diff -urN linux-2.6.18/arch/blackfin/kernel/bfin_dma_5xx.c linux-2.6.18.patch1/arch/blackfin/kernel/bfin_dma_5xx.c
--- linux-2.6.18/arch/blackfin/kernel/bfin_dma_5xx.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/bfin_dma_5xx.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,749 @@
+
+int dma_channel_active(unsigned int channel)
+{
+ if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) {
+ return 0;
+ } else {
+ return 1;
+ }
Drop all of those braces. Not needed nor wanted (see Doc/CodingStyle).
+}
+
+/*------------------------------------------------------------------------------
+* Set the Start Address register for the specific DMA channel
+* This function can be used for register based DMA,
+* to setup the start address
+* addr: Starting address of the DMA Data to be transferred.
+*-----------------------------------------------------------------------------*/
Please convert that to kernel-doc format.
+void set_dma_start_addr(unsigned int channel, unsigned long addr)
+{
+ DMA_DBG("set_dma_start_addr() : BEGIN \n");
+
+ assert(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL);
+
+ dma_ch[channel].regs->start_addr = addr;
+ SSYNC;
+ DMA_DBG("set_dma_start_addr() : END\n");
+}
Ideally, non-static functions (and static ones that have pointer/method
access) would be documented via kernel-doc....
+void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
+{
+ DMA_DBG("set_dma_next_desc_addr() : BEGIN \n");
+
+ assert(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL);
+
+ dma_ch[channel].regs->next_desc_ptr = addr;
+ SSYNC;
+ DMA_DBG("set_dma_start_addr() : END\n");
+}
diff -urN linux-2.6.18/arch/blackfin/kernel/bfin_ksyms.c linux-2.6.18.patch1/arch/blackfin/kernel/bfin_ksyms.c
--- linux-2.6.18/arch/blackfin/kernel/bfin_ksyms.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/bfin_ksyms.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,114 @@
Current practice is to put EXPORTs in the source file where they are
defined, preferably immediately after each function (or data), not
in a group at one place in the source file.
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(dump_thread);
+
+EXPORT_SYMBOL(ip_fast_csum);
+
+EXPORT_SYMBOL(kernel_thread);
+
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_trylock);
+EXPORT_SYMBOL(__down_interruptible);
+
+EXPORT_SYMBOL(is_in_rom);
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy);
+
+/* The following are special because they're not called
+ explicitly (the C compiler generates them). Fortunately,
+ their interface isn't gonna change any time soon now, so
+ it's OK to leave it out of version control. */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(get_wchan);
diff -urN linux-2.6.18/arch/blackfin/kernel/init_task.c linux-2.6.18.patch1/arch/blackfin/kernel/init_task.c
--- linux-2.6.18/arch/blackfin/kernel/init_task.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/init_task.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,63 @@
+
+union thread_union init_thread_union
+ __attribute__ ((__section__(".data.init_task"))) = {
+INIT_THREAD_INFO(init_task)};
last line needs to be indented.
diff -urN linux-2.6.18/arch/blackfin/kernel/irqchip.c linux-2.6.18.patch1/arch/blackfin/kernel/irqchip.c
--- linux-2.6.18/arch/blackfin/kernel/irqchip.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/irqchip.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,150 @@
+
+void ack_bad_irq(unsigned int irq)
+{
+ irq_err_count += 1;
+ printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
If these happen at all, you may need to rate-limit the printk() call by
using printk_ratelimit() instead.
+}
+EXPORT_SYMBOL(ack_bad_irq);
+
diff -urN linux-2.6.18/arch/blackfin/kernel/module.c linux-2.6.18.patch1/arch/blackfin/kernel/module.c
--- linux-2.6.18/arch/blackfin/kernel/module.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/module.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,469 @@
+
+static uint32_t reloc_stack_operate(unsigned int oper, struct module *mod)
+{
+ uint32_t value;
+ switch (oper) {
+ case R_add:
Save one indentation level for the entire block (here & below) by putting the
braces at the same column as the word "case".
+ {
+ value =
+ reloc_stack[reloc_stack_tos - 2] +
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ }
+ case R_sub:
+ {
+ value =
+ reloc_stack[reloc_stack_tos - 2] -
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ }
+ case R_mult:
+ {
+ value =
+ reloc_stack[reloc_stack_tos -
+ 2] * reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ }
+ case R_div:
+ {
+ value =
+ reloc_stack[reloc_stack_tos -
+ 2] / reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ }
+ case R_mod:
+ {
+ value =
+ reloc_stack[reloc_stack_tos -
+ 2] % reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING "module %s: unhandled reloction\n",
+ mod->name);
+ return 0;
+ }
+ }
+}
+
+/*************************************************************************/
+/* FUNCTION : apply_relocate_add */
+/* ABSTRACT : Blackfin specific relocation handling for the loadable */
+/* modules. Modules are expected to be .o files. */
+/* Arithmetic relocations are handled. */
+/* We do not expect LSETUP to be split and hence is not */
+/* handled. */
+/* R_byte and R_byte2 are also not handled as the gas */
+/* does not generate it. */
+/*************************************************************************/
Using kernel-doc doc/comment format would be much better for everyone.
See Documentation/kernel-doc-nano-HOWTO.txt for info/details.
+int
+apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *mod)
+{
+ case R_luimm16:
Align braces with "case".
+ {
+ unsigned short tmp;
+ DEBUGP("before %x after %x\n", *location16,
+ (value & 0xffff));
+ tmp = (value & 0xffff);
+ dma_memcpy(location16, &tmp, 2);
+ }
+ break;
+}
+
diff -urN linux-2.6.18/arch/blackfin/kernel/process.c linux-2.6.18.patch1/arch/blackfin/kernel/process.c
--- linux-2.6.18/arch/blackfin/kernel/process.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/process.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,346 @@
+
+/*
+ * sys_execve() executes a new program.
+ */
+
+asmlinkage int sys_execve(char *name, char **argv, char **envp)
+{
+ int error;
+ char *filename;
+ struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
+
+ lock_kernel();
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+ out:
Unindent the label:
+ unlock_kernel();
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)p;
+ fp = p->thread.usp;
+ do {
+ if (fp < stack_page + sizeof(struct thread_info) ||
+ fp >= 8184 + stack_page)
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *)fp;
+ }
+ while (count++ < 16);
} while (count++ < 16);
See Documentation/CodingStyle :)
+ return 0;
+}
+
diff -urN linux-2.6.18/arch/blackfin/kernel/ptrace.c linux-2.6.18.patch1/arch/blackfin/kernel/ptrace.c
--- linux-2.6.18/arch/blackfin/kernel/ptrace.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/ptrace.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,431 @@
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ int ret;
+ int add = 0;
+
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+ case PTRACE_PEEKDATA:
+#ifdef DEBUG
+ printk("PTRACE_PEEKDATA\n");
+#endif
+ add = MAX_SHARED_LIBS * 4; /* space between text and data */
+ /* fall through */
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ {
Braces at same column as "case".
+ unsigned long tmp = 0;
+ int copied;
+
+ ret = -EIO;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR:
+ {
ditto
+ unsigned long tmp;
+ break;
+ }
+
+ /* when I and D space are separate, this will have to be fixed. */
+ case PTRACE_POKEDATA:
+ printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n");
+ /* fall through */
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ {
ditto
+ break;
+ }
+
+ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+ case PTRACE_CONT:
+ { /* restart after signal. */
ditto
+ long tmp;
+ break;
+ }
+
+/*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+ case PTRACE_KILL:
Put braces at same column as "case" and then undent the entire block.
(many of these)
+ {
+ long tmp;
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+ wake_up_process(child);
+ break;
+ }
+
+ default:
+ printk(KERN_NOTICE "ptrace: *** Unhandled case **** %d\n",
+ (int)request);
+ ret = -EIO;
+ break;
+ }
+
+ return ret;
+}
+
diff -urN linux-2.6.18/arch/blackfin/kernel/setup.c linux-2.6.18.patch1/arch/blackfin/kernel/setup.c
--- linux-2.6.18/arch/blackfin/kernel/setup.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/setup.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,941 @@
+
+u_long get_sclk()
+{
+ u_long ssel;
+
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = (bfin_read_PLL_DIV() & 0xf);
+ if (0 == ssel) {
in Linux kernel, put constant on the right hand side:
if (ssel == 0)
+ printk(KERN_WARNING "Invalid System Clock\n");
+ ssel = 1;
+ }
+
+ return get_vco() / ssel;
+}
+
+EXPORT_SYMBOL(get_sclk);
+
diff -urN linux-2.6.18/arch/blackfin/kernel/signal.c linux-2.6.18.patch1/arch/blackfin/kernel/signal.c
--- linux-2.6.18/arch/blackfin/kernel/signal.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/signal.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,715 @@
+
+asmlinkage void do_signal(struct pt_regs *regs);
unneeded prototype.
+static inline int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext *usc, int *pr0)
+{
+ struct sigcontext context;
+ int err = 0;
+
+ /* get previous context */
+ if (copy_from_user(&context, usc, sizeof(context)))
+ goto badframe;
+ if (context.sc_pc == 0)
+ goto badframe;
+ /* restore passed registers */
+ wrusp(context.sc_usp);
+
+ *pr0 = context.sc_r0;
+ return err;
+
+ badframe:
Don't indent labels so much (either not at all or may 1-2 spaces).
Basically they should stand out (be easy to see), unlike this one.
+ return 1;
+}
+
+static inline int
+rt_restore_ucontext(struct pt_regs *regs, struct ucontext *uc, int *pr0)
+{
+ int temp;
+ greg_t *gregs = uc->uc_mcontext.gregs;
+ unsigned long usp;
+ int err;
+
+ err = __get_user(temp, &uc->uc_mcontext.version);
+ if (temp != MCONTEXT_VERSION)
+ goto badframe;
+ /* restore passed registers */
+ wrusp(usp);
+
+ if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT)
+ goto badframe;
+
+ *pr0 = regs->r0;
+ return err;
+
+ badframe:
Label indented too much.
(global comment, for this and other source files)
+ return 1;
+}
+
diff -urN linux-2.6.18/arch/blackfin/kernel/sys_bfin.c linux-2.6.18.patch1/arch/blackfin/kernel/sys_bfin.c
--- linux-2.6.18/arch/blackfin/kernel/sys_bfin.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/sys_bfin.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,254 @@
+
+/* common code for old and new mmaps */
+static inline long
+do_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file *file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+ out:
Undent (or outdent) label.
(more in same file)
+ return error;
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage int
+sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ if (call <= SEMCTL)
+ switch (call) {
+ case SEMOP:
+ return sys_semop(first, (struct sembuf *)ptr, second);
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL:
Align braces and "case" and then outdent the rest of the block.
More below [deleted].
+ {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void **)ptr))
+ return -EFAULT;
+ return sys_semctl(first, second, third, fourth);
+ }
+ default:
+ return -ENOSYS;
+ }
+}
+
diff -urN linux-2.6.18/arch/blackfin/kernel/time.c linux-2.6.18.patch1/arch/blackfin/kernel/time.c
--- linux-2.6.18/arch/blackfin/kernel/time.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/kernel/time.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,336 @@
+
+static void
+time_sched_init(irqreturn_t(*timer_routine) (int, void *, struct pt_regs *))
+{
+ u32 tcount;
+
+ /* power up the timer, but don't enable it just yet */
+ bfin_write_TCNTL(1);
+ __builtin_bfin_csync();
+
+ /*
+ * the TSCALE prescaler counter.
+ */
+ bfin_write_TSCALE((TIME_SCALE - 1));
+
+ tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+ bfin_write_TPERIOD(tcount);
+ bfin_write_TCOUNT(tcount);
+
+ /* now enable the timer */
+ __builtin_bfin_csync();
+
+ bfin_write_TCNTL(7);
+
+ bfin_timer_irq.handler = timer_routine;
+ /* call setup_irq instead of request_irq because request_irq calls kmalloc which has not been initialized yet */
Split comment onto multiple lines (line is too long).
+ setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long lost, seq;
+ unsigned long usec, sec;
+
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = gettimeoffset();
+ lost = jiffies - wall_jiffies;
+ if (unlikely(lost))
+ usec += lost * (USEC_PER_SEC / HZ);
+ sec = xtime.tv_sec;
+ usec += (xtime.tv_nsec / NSEC_PER_USEC);
+ }
+ while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
Combine } and while(expression) onto one line.
+
+ while (usec >= USEC_PER_SEC) {
+ usec -= USEC_PER_SEC;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
diff -urN linux-2.6.18/arch/blackfin/lib/checksum.c linux-2.6.18.patch1/arch/blackfin/lib/checksum.c
--- linux-2.6.18/arch/blackfin/lib/checksum.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/lib/checksum.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,139 @@
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
Please just use kernel-doc notation for that function comment block.
+unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+{
+ /*
+ * Just in case we get nasty checksum data...
+ * Like 0xffff6ec3 in the case of our IPv6 multicast header.
+ * We fold to begin with, as well as at the end.
+ */
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ sum += do_csum(buff, len);
+
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ return sum;
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/boards/cm_bf533.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/cm_bf533.c
--- linux-2.6.18/arch/blackfin/mach-bf533/boards/cm_bf533.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/cm_bf533.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,236 @@
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
peripherals
+static int __init cm_bf533_init(void)
+{
+ printk("%s(): registering device resources\n", __FUNCTION__);
KERN_INFO ?
+ return platform_add_devices(cm_bf533_devices,
+ ARRAY_SIZE(cm_bf533_devices));
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/boards/ezkit.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/ezkit.c
--- linux-2.6.18/arch/blackfin/mach-bf533/boards/ezkit.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/ezkit.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,213 @@
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
peripherals
+static int __init ezkit_init(void)
+{
+ printk("%s(): registering device resources\n", __FUNCTION__);
KERN_INFO ?
+ platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/boards/generic_board.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/generic_board.c
--- linux-2.6.18/arch/blackfin/mach-bf533/boards/generic_board.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/generic_board.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,78 @@
+
+#include <linux/device.h>
+#include <asm/irq.h>
+
+{
+ printk("%s(): registering device resources\n", __FUNCTION__);
KERN_INFO ?
+ return platform_add_devices(generic_board_devices,
+ ARRAY_SIZE(generic_board_devices));
+}
+
+arch_initcall(generic_board_init);
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/boards/stamp.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/stamp.c
--- linux-2.6.18/arch/blackfin/mach-bf533/boards/stamp.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/boards/stamp.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,265 @@
+
+static int __init stamp_init(void)
+{
+ printk("%s(): registering device resources\n", __FUNCTION__);
KERN_INFO ?
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/cpu.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/cpu.c
--- linux-2.6.18/arch/blackfin/mach-bf533/cpu.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/cpu.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,169 @@
+
+ /**/
Drop comment above.
Don't indent the function intro below.
+ static int bf533_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/ints-priority.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/ints-priority.c
--- linux-2.6.18/arch/blackfin/mach-bf533/ints-priority.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/ints-priority.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,69 @@
+
+void program_IAR(void);
Don't really need a function prototype when the function follows
immediately after it.
+/*Program the IAR registers*/
+
+void program_IAR(void)
+{
+};
diff -urN linux-2.6.18/arch/blackfin/mach-bf533/pm.c linux-2.6.18.patch1/arch/blackfin/mach-bf533/pm.c
--- linux-2.6.18/arch/blackfin/mach-bf533/pm.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf533/pm.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,152 @@
+
+#include <asm/io.h>
+
+/*
+ * When we call pm_suspend, that code enters into idle state.
+ * When there is any interrupt,the core will resume
space after comma
+ */
+void bf533_pm_suspend(void)
+{
+}
+
+/*
Change /* to /** and it will be in kernel-doc format.
+ * bf533_pm_prepare - Do preliminary suspend work.
+ * @state: suspend state we're entering.
+ *
+ */
+
+static int bf533_pm_prepare(suspend_state_t state)
+{
+}
+
+/*
Change /* to /**
+ * bf533_pm_enter - Actually enter a sleep state.
+ * @state: State we're entering.
+ *
+ */
+
+static int bf533_pm_enter(suspend_state_t state)
+{
+}
+
+/**
Ditto.
+ * bf533_pm_finish - Finish up suspend sequence.
+ * @state: State we're coming out of.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+
+static int bf533_pm_finish(suspend_state_t state)
+{
+ return 0;
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf537/boards/cm_bf537.c linux-2.6.18.patch1/arch/blackfin/mach-bf537/boards/cm_bf537.c
--- linux-2.6.18/arch/blackfin/mach-bf537/boards/cm_bf537.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf537/boards/cm_bf537.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,268 @@
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
peripherals
diff -urN linux-2.6.18/arch/blackfin/mach-bf537/boards/generic_board.c linux-2.6.18.patch1/arch/blackfin/mach-bf537/boards/generic_board.c
--- linux-2.6.18/arch/blackfin/mach-bf537/boards/generic_board.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf537/boards/generic_board.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,469 @@
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
peripherals
diff -urN linux-2.6.18/arch/blackfin/mach-bf537/boards/stamp.c linux-2.6.18.patch1/arch/blackfin/mach-bf537/boards/stamp.c
--- linux-2.6.18/arch/blackfin/mach-bf537/boards/stamp.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf537/boards/stamp.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,489 @@
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
peripherals
diff -urN linux-2.6.18/arch/blackfin/mach-bf537/cpu.c linux-2.6.18.patch1/arch/blackfin/mach-bf537/cpu.c
--- linux-2.6.18/arch/blackfin/mach-bf537/cpu.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf537/cpu.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,169 @@
+
+ /**/
Lose the comment above and don't indent the function intro below.
+ static int bf537_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned long cclk_mhz;
+ unsigned long vco_mhz;
+ unsigned long flags;
+ unsigned int index, vco_index;
+ int i;
+
+ struct cpufreq_freqs freqs;
+#if defined(BF533_CPU_DEBUG)
+ printk
KERN_DEBUG ?
+ ("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+ cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+#endif
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
line above is too long.
+ * this platform, anyway.
+ */
+static int bf537_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &bf537_freq_table);
+}
diff -urN linux-2.6.18/arch/blackfin/mach-bf537/ints-priority.c linux-2.6.18.patch1/arch/blackfin/mach-bf537/ints-priority.c
--- linux-2.6.18/arch/blackfin/mach-bf537/ints-priority.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf537/ints-priority.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,79 @@
+
+void program_IAR(void);
Don't need the prototype.
+/*Program the IAR registers*/
+
+void program_IAR()
+{
+}
diff -urN linux-2.6.18/arch/blackfin/mach-bf537/pm.c linux-2.6.18.patch1/arch/blackfin/mach-bf537/pm.c
--- linux-2.6.18/arch/blackfin/mach-bf537/pm.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf537/pm.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,150 @@
+
+#include <asm/io.h>
+
+/*
Use /** for kernel-doc format.
+ * bf537_pm_prepare - Do preliminary suspend work.
+ * @state: suspend state we're entering.
+ *
+ */
+
+static int bf537_pm_prepare(suspend_state_t state)
+{
+}
+
+/*
Use /** for kernel-doc format.
+ * bf537_pm_enter - Actually enter a sleep state.
+ * @state: State we're entering.
+ *
+ */
+
+static int bf537_pm_enter(suspend_state_t state)
+{
+}
+
+/**
Good.
+ * bf537_pm_finish - Finish up suspend sequence.
+ * @state: State we're coming out of.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+
+static int bf537_pm_finish(suspend_state_t state)
+{
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf561/boards/ezkit.c linux-2.6.18.patch1/arch/blackfin/mach-bf561/boards/ezkit.c
--- linux-2.6.18/arch/blackfin/mach-bf561/boards/ezkit.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf561/boards/ezkit.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,84 @@
+
+static int __init ezkit_init(void)
+{
+ printk("%s(): registering device resources\n", __FUNCTION__);
KERN_INFO
+ return platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+}
+
+arch_initcall(ezkit_init);
diff -urN linux-2.6.18/arch/blackfin/mach-bf561/boards/generic_board.c linux-2.6.18.patch1/arch/blackfin/mach-bf561/boards/generic_board.c
--- linux-2.6.18/arch/blackfin/mach-bf561/boards/generic_board.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf561/boards/generic_board.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,78 @@
+
+static int __init generic_board_init(void)
+{
+ printk("%s(): registering device resources\n", __FUNCTION__);
KERN_INFO
+ return platform_add_devices(generic_board_devices,
+ ARRAY_SIZE(generic_board_devices));
+}
diff -urN linux-2.6.18/arch/blackfin/mach-bf561/coreb.c linux-2.6.18.patch1/arch/blackfin/mach-bf561/coreb.c
--- linux-2.6.18/arch/blackfin/mach-bf561/coreb.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf561/coreb.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,413 @@
+
+int __init bf561_coreb_init(void)
+{
+
Don't indent labels so much:
+ release_dma_src:
+ free_dma(CH_MEM_STREAM2_SRC);
+ release_dma_dest:
+ free_dma(CH_MEM_STREAM2_DEST);
+ release_data_a_sram:
+ release_mem_region(0xff400000, 0x8000);
+ release_data_b_sram:
+ release_mem_region(0xff500000, 0x8000);
+ release_instruction_b_sram:
+ release_mem_region(0xff610000, 0x4000);
+ release_instruction_a_sram:
+ release_mem_region(0xff600000, 0x4000);
+ exit:
+ return -ENOMEM;
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-bf561/ints-priority.c linux-2.6.18.patch1/arch/blackfin/mach-bf561/ints-priority.c
--- linux-2.6.18/arch/blackfin/mach-bf561/ints-priority.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-bf561/ints-priority.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,113 @@
+
+void program_IAR(void);
Drop the prototype.
+/*Program the IAR registers*/
+
+void program_IAR()
+{
+}
diff -urN linux-2.6.18/arch/blackfin/mach-common/bf5xx_rtc.c linux-2.6.18.patch1/arch/blackfin/mach-common/bf5xx_rtc.c
--- linux-2.6.18/arch/blackfin/mach-common/bf5xx_rtc.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-common/bf5xx_rtc.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,140 @@
+
+/* Read the time from the RTC_STAT.
+ * time_in_seconds is seconds since Jan 1970
+ */
+int rtc_get(time_t * time_in_seconds)
No space after '*': just use: time_t *time_in_seconds
+{
+ unsigned long cur_rtc_stat = 0;
+ int tm_sec = 0, tm_min = 0, tm_hour = 0, tm_day = 0;
+
+ if (time_in_seconds == NULL) {
+ return -1;
+ }
Drop the unneeded braces.
+ /* Read the RTC_STAT register */
+ cur_rtc_stat = bfin_read_RTC_STAT();
+}
diff -urN linux-2.6.18/arch/blackfin/mach-common/cplbinfo.c linux-2.6.18.patch1/arch/blackfin/mach-common/cplbinfo.c
--- linux-2.6.18/arch/blackfin/mach-common/cplbinfo.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-common/cplbinfo.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,212 @@
+
+static int cplbinfo_write_proc(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+{
+ printk("Reset the CPLB swap in/out counts.\n");
+ memset(ipdt_swapcount_table, 0, 100 * sizeof(unsigned long));
+ memset(dpdt_swapcount_table, 0, 120 * sizeof(unsigned long));
Could you eliminate those magic numbers (100, 120) ?
+ return count;
+}
diff -urN linux-2.6.18/arch/blackfin/mach-common/ints-priority-dc.c linux-2.6.18.patch1/arch/blackfin/mach-common/ints-priority-dc.c
--- linux-2.6.18/arch/blackfin/mach-common/ints-priority-dc.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-common/ints-priority-dc.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,545 @@
+
+static void bf561_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
should that be local_irq_disable() ?
or you use local_irq_enable() in both core_mask_irq() and
core_unmask_irq() ?
+}
+
+static void bf561_core_unmask_irq(unsigned int irq)
+{
+ irq_flags |= 1 << irq;
+ /*
+ * If interrupts are enabled, IMASK must contain the same value
+ * as irq_flags. Make sure that invariant holds. If interrupts
+ * are currently disabled we need not do anything; one of the
+ * callers will take care of setting IMASK to the proper value
+ * when reenabling interrupts.
+ * local_irq_enable just does "STI irq_flags", so it's exactly
+ * what we need.
+ */
+ if (!irqs_disabled())
+ local_irq_enable();
+ return;
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-common/ints-priority-sc.c linux-2.6.18.patch1/arch/blackfin/mach-common/ints-priority-sc.c
--- linux-2.6.18/arch/blackfin/mach-common/ints-priority-sc.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-common/ints-priority-sc.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,619 @@
+
+volatile unsigned long irq_flags = 0;
+
+/* The number of spurious interrupts */
+volatile unsigned int num_spurious;
too much volatile.
+static void search_IAR(void);
Function prototype not needed.
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+ unsigned ivg, irq_pos = 0;
+ for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+ int irqn;
+
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
+
+ for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
+ int iar_shift = (irqn & 7) * 4;
+ if (ivg ==
+ (0xf &
+ bfin_read32((unsigned long *)SIC_IAR0 +
+ (irqn >> 3)) >> iar_shift)) {
+ ivg_table[irq_pos].irqno = IVG7 + irqn;
+ ivg_table[irq_pos].isrflag = 1 << irqn;
+ ivg7_13[ivg].istop++;
+ irq_pos++;
+ }
+ }
+ }
+}
+
+static void bf533_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
should that be local_irq_disable() ?
+}
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+static int gpio_enabled;
+static int gpio_edge_triggered;
General comment: it's probably not in CodingStyle, but we seem to prefer
to see a blank line between a function's local data and its executable
statements (applies to many functions in this patch).
+static void bf533_gpio_mask_irq(unsigned int irq)
+{
+ int gpionr = irq - IRQ_PF0;
+ int mask = (1L << gpionr);
+ bfin_write_FIO_FLAG_C(mask);
+ __builtin_bfin_ssync();
+ bfin_write_FIO_MASKB_C(mask);
+ __builtin_bfin_ssync();
+}
+
+void do_irq(int vec, struct pt_regs *fp)
+{
+ if (vec == EVT_IVTMR_P) {
+ vec = IRQ_CORETMR;
drop the extra/unneeded braces.
+ } else {
+ struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+ struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+ unsigned long sic_status;
+
+ __builtin_bfin_ssync();
+ sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ num_spurious++;
+ return;
+ } else if (sic_status & ivg->isrflag)
+ break;
+ }
+ vec = ivg->irqno;
+ }
+ asm_do_IRQ(vec, fp);
+}
+
diff -urN linux-2.6.18/arch/blackfin/mach-common/irqpanic.c linux-2.6.18.patch1/arch/blackfin/mach-common/irqpanic.c
--- linux-2.6.18/arch/blackfin/mach-common/irqpanic.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mach-common/irqpanic.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,193 @@
+
+/*
+ * irq_panic - calls panic with string setup
+ */
+asmlinkage void irq_panic(int reason, struct pt_regs *regs)
+{
...
+ if (die) {
+ printk("icache coherency error\n");
KERN_ALERT or KERN_EMERGENCY ?
+ for (j = 0; j <= i; j++) {
+ printk
+ ("cache address : %08x cache value : %08x%08x\n",
+ bad[j][0], bad[j][1], bad[j][2]);
+ printk
+ ("physical address: %08x SDRAM value : %08x%08x\n",
+ bad[j][3], bad[j][4], bad[j][5]);
+ }
+ panic("icache coherency error");
+ } else {
+ printk("\n\nicache checked, and OK\n");
+ }
+#endif
Add KERN_ levels:
+ printk("\n\nException: IRQ 0x%x entered\n", reason);
+ printk(" code=[0x%08x], ", (unsigned int)regs->seqstat);
+ printk(" stack frame=0x%04x, ", (unsigned int)(unsigned long)regs);
+ printk(" bad PC=0x%04x\n", (unsigned int)regs->pc);
+ if (reason == 0x5) {
+ printk("\n----------- HARDWARE ERROR -----------\n\n");
+
+ /* There is only need to check for Hardware Errors, since other
+ * EXCEPTIONS are handled in TRAPS.c (MH)
+ */
+ switch (regs->seqstat & SEQSTAT_HWERRCAUSE) {
+ case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(HWC_x2);
+ break;
+ case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */
+ info.si_code = BUS_ADRERR;
+ sig = SIGBUS;
+ printk(KERN_EMERG HWC_x3);
+ break;
+ case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */
+ printk(KERN_EMERG HWC_x12);
+ break;
+ case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */
+ printk(KERN_EMERG HWC_x18);
+ break;
+ default: /* Reserved */
+ printk(KERN_EMERG HWC_default);
+ break;
+ }
+ }
+
+ regs->ipend = bfin_read_IPEND();
+ dump_bfin_regs(regs, (void *)regs->pc);
+ if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */
+ panic("Unhandled IRQ or exceptions!\n");
+ else { /* in userspace */
+ info.si_errno = 0;
+ info.si_addr = (void *)regs->pc;
+ force_sig_info(sig, &info, current);
+ }
+}
+
diff -urN linux-2.6.18/arch/blackfin/mm/blackfin_sram.c linux-2.6.18.patch1/arch/blackfin/mm/blackfin_sram.c
--- linux-2.6.18/arch/blackfin/mm/blackfin_sram.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/mm/blackfin_sram.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,532 @@
+
+int sram_free(const void *addr)
+{
+ if (0) {
+ }
Drop those 2 lines.
+}
+
+int sram_free_with_lsl(const void *addr)
+{
+ struct sram_list_struct *lsl, **tmp;
+ struct mm_struct *mm = current->mm;
+
+ for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
+ if ((*tmp)->addr == addr)
+ goto found;
+ return -1;
+ found:
Outdent the label.
+ lsl = *tmp;
+ sram_free(addr);
+ *tmp = lsl->next;
+ kfree(lsl);
+
+ return 0;
+}
+
diff -urN linux-2.6.18/arch/blackfin/oprofile/common.c linux-2.6.18.patch1/arch/blackfin/oprofile/common.c
--- linux-2.6.18/arch/blackfin/oprofile/common.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/oprofile/common.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,170 @@
+
+static int op_bfin_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+ printk("Oprofile: creating files... \n");
KERN_DEBUG ?
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+ /*
+ * We dont support per counter user/kernel selection, but
+ * we leave the entries because userspace expects them
+ */
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+ oprofilefs_create_ulong(sb, dir, "unit_mask",
+ &ctr[i].unit_mask);
+ }
+
+ return 0;
+}
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+#ifdef CONFIG_HARDWARE_PM
+ unsigned int dspid;
+
+ init_MUTEX(&pfmon_sem);
+
+ dspid = bfin_read_DSPID();
+
+ printk("Oprofile got the cpu id is 0x%x. \n", dspid);
Drop "the" and "is" ?
+ switch (dspid) {
+ case BFIN_533_ID:
+ model = &op_model_bfin533;
+ model->num_counters = 2;
+ break;
+ case BFIN_537_ID:
+ model = &op_model_bfin533;
+ model->num_counters = 2;
+ break;
+ default:
+ return -ENODEV;
+ }
+
diff -urN linux-2.6.18/arch/blackfin/oprofile/op_model_bf533.c linux-2.6.18.patch1/arch/blackfin/oprofile/op_model_bf533.c
--- linux-2.6.18/arch/blackfin/oprofile/op_model_bf533.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/oprofile/op_model_bf533.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,168 @@
+
+#ifdef PM_DEBUG
+#define dbg(args...) printk(args)
+#else
+#define dbg(args...)
+#endif
+#define PM_ENABLE 0x01;
Drop the ";".
+#define PM_CTL1_ENABLE 0x18
+#define PM_CTL0_ENABLE 0xC000
+#define COUNT_EDGE_ONLY 0x3000000
+
+static int oprofile_running;
+
+unsigned curr_pfctl, curr_count[2];
+
+static int get_kernel(void)
+{
+ int ipend, is_kernel;
+
+ ipend = bfin_read_IPEND();
+
+ /* test bit 15 */
+ is_kernel = ((ipend & 0x8000) != 0);
Drop extra (outer) parens.
+ return is_kernel;
+}
+
diff -urN linux-2.6.18/arch/blackfin/oprofile/timer_int.c linux-2.6.18.patch1/arch/blackfin/oprofile/timer_int.c
--- linux-2.6.18/arch/blackfin/oprofile/timer_int.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18.patch1/arch/blackfin/oprofile/timer_int.c 2006-09-21 09:29:49.000000000 +0800
@@ -0,0 +1,79 @@
+static int sys_timer0_start(void)
+{
+ enable_sys_timer0();
+ int retval = request_irq(IVG11, sys_timer0_int_handler, 0,
+ "sys_timer0", NULL);
+ if (retval)
+ return retval;
+ return 0;
Isn't that the same as just doing:
return retval;
in all cases?
+}
###
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
