[PATCH 1/3 -repost] pmc551 whitespace cleanup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pmc551 whitespace cleanup

Spaces were used for indent, there was more than 80 columns per line. Get
rid of that stuff.

Signed-off-by: Jiri Slaby <[email protected]>

---
commit 22f07f42debab2cc3b6ab895d2fa2c34d192c25c
tree 11ae1ed1123a77a12c1f7238d3cb14213dab3431
parent b1022ccd9ec9cb8d9503e649f62c0cd4784c4598
author Jiri Slaby <[email protected]> Tue, 19 Sep 2006 21:30:05 +0200
committer Jiri Slaby <[email protected]> Tue, 19 Sep 2006 21:30:05 +0200

 drivers/mtd/devices/pmc551.c | 1163 ++++++++++++++++++++++--------------------
 1 files changed, 596 insertions(+), 567 deletions(-)

diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index a03a8a7..4d40236 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -4,82 +4,82 @@
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
- *       Mark Ferrell <[email protected]>
- *       Copyright 1999,2000 Nortel Networks
+ *	Mark Ferrell <[email protected]>
+ *	Copyright 1999,2000 Nortel Networks
  *
  * License:
- *	 As part of this driver was derived from the slram.c driver it
- *	 falls under the same license, which is GNU General Public
- *	 License v2
+ *	As part of this driver was derived from the slram.c driver it
+ *	falls under the same license, which is GNU General Public
+ *	License v2
  *
  * Description:
- *	 This driver is intended to support the PMC551 PCI Ram device
- *	 from Ramix Inc.  The PMC551 is a PMC Mezzanine module for
- *	 cPCI embedded systems.  The device contains a single SROM
- *	 that initially programs the V370PDC chipset onboard the
- *	 device, and various banks of DRAM/SDRAM onboard.  This driver
- *	 implements this PCI Ram device as an MTD (Memory Technology
- *	 Device) so that it can be used to hold a file system, or for
- *	 added swap space in embedded systems.  Since the memory on
- *	 this board isn't as fast as main memory we do not try to hook
- *	 it into main memory as that would simply reduce performance
- *	 on the system.  Using it as a block device allows us to use
- *	 it as high speed swap or for a high speed disk device of some
- *	 sort.  Which becomes very useful on diskless systems in the
- *	 embedded market I might add.
+ *	This driver is intended to support the PMC551 PCI Ram device
+ *	from Ramix Inc.  The PMC551 is a PMC Mezzanine module for
+ *	cPCI embedded systems.  The device contains a single SROM
+ *	that initially programs the V370PDC chipset onboard the
+ *	device, and various banks of DRAM/SDRAM onboard.  This driver
+ *	implements this PCI Ram device as an MTD (Memory Technology
+ *	Device) so that it can be used to hold a file system, or for
+ *	added swap space in embedded systems.  Since the memory on
+ *	this board isn't as fast as main memory we do not try to hook
+ *	it into main memory as that would simply reduce performance
+ *	on the system.  Using it as a block device allows us to use
+ *	it as high speed swap or for a high speed disk device of some
+ *	sort.  Which becomes very useful on diskless systems in the
+ *	embedded market I might add.
  *
  * Notes:
- *	 Due to what I assume is more buggy SROM, the 64M PMC551 I
- *	 have available claims that all 4 of it's DRAM banks have 64M
- *	 of ram configured (making a grand total of 256M onboard).
- *	 This is slightly annoying since the BAR0 size reflects the
- *	 aperture size, not the dram size, and the V370PDC supplies no
- *	 other method for memory size discovery.  This problem is
- *	 mostly only relevant when compiled as a module, as the
- *	 unloading of the module with an aperture size smaller then
- *	 the ram will cause the driver to detect the onboard memory
- *	 size to be equal to the aperture size when the module is
- *	 reloaded.  Soooo, to help, the module supports an msize
- *	 option to allow the specification of the onboard memory, and
- *	 an asize option, to allow the specification of the aperture
- *	 size.  The aperture must be equal to or less then the memory
- *	 size, the driver will correct this if you screw it up.  This
- *	 problem is not relevant for compiled in drivers as compiled
- *	 in drivers only init once.
+ *	Due to what I assume is more buggy SROM, the 64M PMC551 I
+ *	have available claims that all 4 of it's DRAM banks have 64M
+ *	of ram configured (making a grand total of 256M onboard).
+ *	This is slightly annoying since the BAR0 size reflects the
+ *	aperture size, not the dram size, and the V370PDC supplies no
+ *	other method for memory size discovery.  This problem is
+ *	mostly only relevant when compiled as a module, as the
+ *	unloading of the module with an aperture size smaller then
+ *	the ram will cause the driver to detect the onboard memory
+ *	size to be equal to the aperture size when the module is
+ *	reloaded.  Soooo, to help, the module supports an msize
+ *	option to allow the specification of the onboard memory, and
+ *	an asize option, to allow the specification of the aperture
+ *	size.  The aperture must be equal to or less then the memory
+ *	size, the driver will correct this if you screw it up.  This
+ *	problem is not relevant for compiled in drivers as compiled
+ *	in drivers only init once.
  *
  * Credits:
- *       Saeed Karamooz <[email protected]> of Ramix INC. for the
- *       initial example code of how to initialize this device and for
- *       help with questions I had concerning operation of the device.
+ *	Saeed Karamooz <[email protected]> of Ramix INC. for the
+ *	initial example code of how to initialize this device and for
+ *	help with questions I had concerning operation of the device.
  *
- *       Most of the MTD code for this driver was originally written
- *       for the slram.o module in the MTD drivers package which
- *       allows the mapping of system memory into an MTD device.
- *       Since the PMC551 memory module is accessed in the same
- *       fashion as system memory, the slram.c code became a very nice
- *       fit to the needs of this driver.  All we added was PCI
- *       detection/initialization to the driver and automatically figure
- *       out the size via the PCI detection.o, later changes by Corey
- *       Minyard set up the card to utilize a 1M sliding apature.
+ *	Most of the MTD code for this driver was originally written
+ *	for the slram.o module in the MTD drivers package which
+ *	allows the mapping of system memory into an MTD device.
+ *	Since the PMC551 memory module is accessed in the same
+ *	fashion as system memory, the slram.c code became a very nice
+ *	fit to the needs of this driver.  All we added was PCI
+ *	detection/initialization to the driver and automatically figure
+ *	out the size via the PCI detection.o, later changes by Corey
+ *	Minyard set up the card to utilize a 1M sliding apature.
  *
- *	 Corey Minyard <[email protected]>
- *       * Modified driver to utilize a sliding aperture instead of
- *         mapping all memory into kernel space which turned out to
- *         be very wasteful.
- *       * Located a bug in the SROM's initialization sequence that
- *         made the memory unusable, added a fix to code to touch up
- *         the DRAM some.
+ *	Corey Minyard <[email protected]>
+ *	* Modified driver to utilize a sliding aperture instead of
+ *	 mapping all memory into kernel space which turned out to
+ *	 be very wasteful.
+ *	* Located a bug in the SROM's initialization sequence that
+ *	 made the memory unusable, added a fix to code to touch up
+ *	 the DRAM some.
  *
  * Bugs/FIXME's:
- *       * MUST fix the init function to not spin on a register
- *       waiting for it to set .. this does not safely handle busted
- *       devices that never reset the register correctly which will
- *       cause the system to hang w/ a reboot being the only chance at
- *       recover. [sort of fixed, could be better]
- *       * Add I2C handling of the SROM so we can read the SROM's information
- *       about the aperture size.  This should always accurately reflect the
- *       onboard memory size.
- *       * Comb the init routine.  It's still a bit cludgy on a few things.
+ *	* MUST fix the init function to not spin on a register
+ *	waiting for it to set .. this does not safely handle busted
+ *	devices that never reset the register correctly which will
+ *	cause the system to hang w/ a reboot being the only chance at
+ *	recover. [sort of fixed, could be better]
+ *	* Add I2C handling of the SROM so we can read the SROM's information
+ *	about the aperture size.  This should always accurately reflect the
+ *	onboard memory size.
+ *	* Comb the init routine.  It's still a bit cludgy on a few things.
  */
 
 #include <linux/kernel.h>
@@ -105,74 +105,77 @@ #include <linux/mtd/compatmac.h>
 
 static struct mtd_info *pmc551list;
 
-static int pmc551_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-        struct mypriv *priv = mtd->priv;
-        u32 soff_hi, soff_lo; /* start address offset hi/lo */
-        u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
-        unsigned long end;
+	struct mypriv *priv = mtd->priv;
+	u32 soff_hi, soff_lo;	/* start address offset hi/lo */
+	u32 eoff_hi, eoff_lo;	/* end address offset hi/lo */
+	unsigned long end;
 	u_char *ptr;
 	size_t retlen;
 
 #ifdef CONFIG_MTD_PMC551_DEBUG
-	printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len);
+	printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr,
+		(long)instr->len);
 #endif
 
-        end = instr->addr + instr->len - 1;
+	end = instr->addr + instr->len - 1;
 
-        /* Is it past the end? */
-        if ( end > mtd->size ) {
+	/* Is it past the end? */
+	if (end > mtd->size) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-	printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", (long)end, (long)mtd->size);
+		printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n",
+			(long)end, (long)mtd->size);
 #endif
-                return -EINVAL;
-        }
-
-        eoff_hi = end & ~(priv->asize - 1);
-        soff_hi = instr->addr & ~(priv->asize - 1);
-        eoff_lo = end & (priv->asize - 1);
-        soff_lo = instr->addr & (priv->asize - 1);
-
-	pmc551_point (mtd, instr->addr, instr->len, &retlen, &ptr);
-
-        if ( soff_hi == eoff_hi || mtd->size == priv->asize) {
-                /* The whole thing fits within one access, so just one shot
-                   will do it. */
-                memset(ptr, 0xff, instr->len);
-        } else {
-                /* We have to do multiple writes to get all the data
-                   written. */
-                while (soff_hi != eoff_hi) {
+		return -EINVAL;
+	}
+
+	eoff_hi = end & ~(priv->asize - 1);
+	soff_hi = instr->addr & ~(priv->asize - 1);
+	eoff_lo = end & (priv->asize - 1);
+	soff_lo = instr->addr & (priv->asize - 1);
+
+	pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr);
+
+	if (soff_hi == eoff_hi || mtd->size == priv->asize) {
+		/* The whole thing fits within one access, so just one shot
+		   will do it. */
+		memset(ptr, 0xff, instr->len);
+	} else {
+		/* We have to do multiple writes to get all the data
+		   written. */
+		while (soff_hi != eoff_hi) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-			printk( KERN_DEBUG "pmc551_erase() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+			printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, "
+				"eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
 #endif
-                        memset(ptr, 0xff, priv->asize);
-                        if (soff_hi + priv->asize >= mtd->size) {
-                                goto out;
-                        }
-                        soff_hi += priv->asize;
-			pmc551_point (mtd,(priv->base_map0|soff_hi),
-				      priv->asize, &retlen, &ptr);
-                }
-                memset (ptr, 0xff, eoff_lo);
-        }
-
-out:
+			memset(ptr, 0xff, priv->asize);
+			if (soff_hi + priv->asize >= mtd->size) {
+				goto out;
+			}
+			soff_hi += priv->asize;
+			pmc551_point(mtd, (priv->base_map0 | soff_hi),
+				     priv->asize, &retlen, &ptr);
+		}
+		memset(ptr, 0xff, eoff_lo);
+	}
+
+      out:
 	instr->state = MTD_ERASE_DONE;
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_erase() done\n");
 #endif
 
-        mtd_erase_callback(instr);
-        return 0;
+	mtd_erase_callback(instr);
+	return 0;
 }
 
-
-static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t * retlen, u_char ** mtdbuf)
 {
-        struct mypriv *priv = mtd->priv;
-        u32 soff_hi;
-        u32 soff_lo;
+	struct mypriv *priv = mtd->priv;
+	u32 soff_hi;
+	u32 soff_lo;
 
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
@@ -180,18 +183,19 @@ #endif
 
 	if (from + len > mtd->size) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", (long)from+len, (long)mtd->size);
+		printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n",
+			(long)from + len, (long)mtd->size);
 #endif
 		return -EINVAL;
 	}
 
-        soff_hi = from & ~(priv->asize - 1);
-        soff_lo = from & (priv->asize - 1);
+	soff_hi = from & ~(priv->asize - 1);
+	soff_lo = from & (priv->asize - 1);
 
 	/* Cheap hack optimization */
-	if( priv->curr_map0 != from ) {
-        	pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0,
-                                 	(priv->base_map0 | soff_hi) );
+	if (priv->curr_map0 != from) {
+		pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
+					(priv->base_map0 | soff_hi));
 		priv->curr_map0 = soff_hi;
 	}
 
@@ -200,137 +204,144 @@ #endif
 	return 0;
 }
 
-
-static void pmc551_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
+			   size_t len)
 {
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_unpoint()\n");
 #endif
 }
 
-
-static int pmc551_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t * retlen, u_char * buf)
 {
-        struct mypriv *priv = mtd->priv;
-        u32 soff_hi, soff_lo; /* start address offset hi/lo */
-        u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
-        unsigned long end;
+	struct mypriv *priv = mtd->priv;
+	u32 soff_hi, soff_lo;	/* start address offset hi/lo */
+	u32 eoff_hi, eoff_lo;	/* end address offset hi/lo */
+	unsigned long end;
 	u_char *ptr;
-        u_char *copyto = buf;
+	u_char *copyto = buf;
 
 #ifdef CONFIG_MTD_PMC551_DEBUG
-	printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize);
+	printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n",
+		(long)from, (long)len, (long)priv->asize);
 #endif
 
-        end = from + len - 1;
+	end = from + len - 1;
 
-        /* Is it past the end? */
-        if (end > mtd->size) {
+	/* Is it past the end? */
+	if (end > mtd->size) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-	printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", (long) end, (long)mtd->size);
+		printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n",
+			(long)end, (long)mtd->size);
 #endif
-                return -EINVAL;
-        }
-
-        soff_hi = from & ~(priv->asize - 1);
-        eoff_hi = end & ~(priv->asize - 1);
-        soff_lo = from & (priv->asize - 1);
-        eoff_lo = end & (priv->asize - 1);
-
-	pmc551_point (mtd, from, len, retlen, &ptr);
-
-        if (soff_hi == eoff_hi) {
-                /* The whole thing fits within one access, so just one shot
-                   will do it. */
-                memcpy(copyto, ptr, len);
-                copyto += len;
-        } else {
-                /* We have to do multiple writes to get all the data
-                   written. */
-                while (soff_hi != eoff_hi) {
+		return -EINVAL;
+	}
+
+	soff_hi = from & ~(priv->asize - 1);
+	eoff_hi = end & ~(priv->asize - 1);
+	soff_lo = from & (priv->asize - 1);
+	eoff_lo = end & (priv->asize - 1);
+
+	pmc551_point(mtd, from, len, retlen, &ptr);
+
+	if (soff_hi == eoff_hi) {
+		/* The whole thing fits within one access, so just one shot
+		   will do it. */
+		memcpy(copyto, ptr, len);
+		copyto += len;
+	} else {
+		/* We have to do multiple writes to get all the data
+		   written. */
+		while (soff_hi != eoff_hi) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-			printk( KERN_DEBUG "pmc551_read() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+			printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, "
+				"eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
 #endif
-                        memcpy(copyto, ptr, priv->asize);
-                        copyto += priv->asize;
-                        if (soff_hi + priv->asize >= mtd->size) {
-                                goto out;
-                        }
-                        soff_hi += priv->asize;
-			pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr);
-                }
-                memcpy(copyto, ptr, eoff_lo);
-                copyto += eoff_lo;
-        }
-
-out:
+			memcpy(copyto, ptr, priv->asize);
+			copyto += priv->asize;
+			if (soff_hi + priv->asize >= mtd->size) {
+				goto out;
+			}
+			soff_hi += priv->asize;
+			pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+		}
+		memcpy(copyto, ptr, eoff_lo);
+		copyto += eoff_lo;
+	}
+
+      out:
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_read() done\n");
 #endif
-        *retlen = copyto - buf;
-        return 0;
+	*retlen = copyto - buf;
+	return 0;
 }
 
-static int pmc551_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
+			size_t * retlen, const u_char * buf)
 {
-        struct mypriv *priv = mtd->priv;
-        u32 soff_hi, soff_lo; /* start address offset hi/lo */
-        u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
-        unsigned long end;
+	struct mypriv *priv = mtd->priv;
+	u32 soff_hi, soff_lo;	/* start address offset hi/lo */
+	u32 eoff_hi, eoff_lo;	/* end address offset hi/lo */
+	unsigned long end;
 	u_char *ptr;
-        const u_char *copyfrom = buf;
-
+	const u_char *copyfrom = buf;
 
 #ifdef CONFIG_MTD_PMC551_DEBUG
-	printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize);
+	printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n",
+		(long)to, (long)len, (long)priv->asize);
 #endif
 
-        end = to + len - 1;
-        /* Is it past the end?  or did the u32 wrap? */
-        if (end > mtd->size ) {
+	end = to + len - 1;
+	/* Is it past the end?  or did the u32 wrap? */
+	if (end > mtd->size) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-	printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, size: %ld, to: %ld)\n", (long) end, (long)mtd->size, (long)to);
+		printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, "
+			"size: %ld, to: %ld)\n", (long)end, (long)mtd->size,
+			(long)to);
 #endif
-                return -EINVAL;
-        }
-
-        soff_hi = to & ~(priv->asize - 1);
-        eoff_hi = end & ~(priv->asize - 1);
-        soff_lo = to & (priv->asize - 1);
-        eoff_lo = end & (priv->asize - 1);
-
-	pmc551_point (mtd, to, len, retlen, &ptr);
-
-        if (soff_hi == eoff_hi) {
-                /* The whole thing fits within one access, so just one shot
-                   will do it. */
-                memcpy(ptr, copyfrom, len);
-                copyfrom += len;
-        } else {
-                /* We have to do multiple writes to get all the data
-                   written. */
-                while (soff_hi != eoff_hi) {
+		return -EINVAL;
+	}
+
+	soff_hi = to & ~(priv->asize - 1);
+	eoff_hi = end & ~(priv->asize - 1);
+	soff_lo = to & (priv->asize - 1);
+	eoff_lo = end & (priv->asize - 1);
+
+	pmc551_point(mtd, to, len, retlen, &ptr);
+
+	if (soff_hi == eoff_hi) {
+		/* The whole thing fits within one access, so just one shot
+		   will do it. */
+		memcpy(ptr, copyfrom, len);
+		copyfrom += len;
+	} else {
+		/* We have to do multiple writes to get all the data
+		   written. */
+		while (soff_hi != eoff_hi) {
 #ifdef CONFIG_MTD_PMC551_DEBUG
-			printk( KERN_DEBUG "pmc551_write() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+			printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, "
+				"eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
 #endif
-                	memcpy(ptr, copyfrom, priv->asize);
-                	copyfrom += priv->asize;
-                        if (soff_hi >= mtd->size) {
-                                goto out;
-                        }
-                        soff_hi += priv->asize;
-			pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr);
-                }
-                memcpy(ptr, copyfrom, eoff_lo);
-                copyfrom += eoff_lo;
-        }
-
-out:
+			memcpy(ptr, copyfrom, priv->asize);
+			copyfrom += priv->asize;
+			if (soff_hi >= mtd->size) {
+				goto out;
+			}
+			soff_hi += priv->asize;
+			pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+		}
+		memcpy(ptr, copyfrom, eoff_lo);
+		copyfrom += eoff_lo;
+	}
+
+      out:
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_write() done\n");
 #endif
-        *retlen = copyfrom - buf;
-        return 0;
+	*retlen = copyfrom - buf;
+	return 0;
 }
 
 /*
@@ -345,58 +356,58 @@ #endif
  * mechanism
  * returns the size of the memory region found.
  */
-static u32 fixup_pmc551 (struct pci_dev *dev)
+static u32 fixup_pmc551(struct pci_dev *dev)
 {
 #ifdef CONFIG_MTD_PMC551_BUGFIX
-        u32 dram_data;
+	u32 dram_data;
 #endif
-        u32 size, dcmd, cfg, dtmp;
-        u16 cmd, tmp, i;
+	u32 size, dcmd, cfg, dtmp;
+	u16 cmd, tmp, i;
 	u8 bcmd, counter;
 
-        /* Sanity Check */
-        if(!dev) {
-                return -ENODEV;
-        }
+	/* Sanity Check */
+	if (!dev) {
+		return -ENODEV;
+	}
 
 	/*
 	 * Attempt to reset the card
 	 * FIXME: Stop Spinning registers
 	 */
-	counter=0;
+	counter = 0;
 	/* unlock registers */
-	pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5 );
+	pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5);
 	/* read in old data */
-	pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
+	pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
 	/* bang the reset line up and down for a few */
-	for(i=0;i<10;i++) {
-		counter=0;
+	for (i = 0; i < 10; i++) {
+		counter = 0;
 		bcmd &= ~0x80;
-		while(counter++ < 100) {
+		while (counter++ < 100) {
 			pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
 		}
-		counter=0;
+		counter = 0;
 		bcmd |= 0x80;
-		while(counter++ < 100) {
+		while (counter++ < 100) {
 			pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
 		}
 	}
-	bcmd |= (0x40|0x20);
+	bcmd |= (0x40 | 0x20);
 	pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
 
-        /*
+	/*
 	 * Take care and turn off the memory on the device while we
 	 * tweak the configurations
 	 */
-        pci_read_config_word(dev, PCI_COMMAND, &cmd);
-        tmp = cmd & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY);
-        pci_write_config_word(dev, PCI_COMMAND, tmp);
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+	pci_write_config_word(dev, PCI_COMMAND, tmp);
 
 	/*
 	 * Disable existing aperture before probing memory size
 	 */
 	pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd);
-        dtmp=(dcmd|PMC551_PCI_MEM_MAP_ENABLE|PMC551_PCI_MEM_MAP_REG_EN);
+	dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN);
 	pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp);
 	/*
 	 * Grab old BAR0 config so that we can figure out memory size
@@ -407,220 +418,231 @@ #endif
 	 * then write all 1's to the memory space, read back the result into
 	 * "size", and then write back all the old config.
 	 */
-	pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &cfg );
+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg);
 #ifndef CONFIG_MTD_PMC551_BUGFIX
-	pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, ~0 );
-	pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &size );
-	size = (size&PCI_BASE_ADDRESS_MEM_MASK);
-	size &= ~(size-1);
-	pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0);
+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size);
+	size = (size & PCI_BASE_ADDRESS_MEM_MASK);
+	size &= ~(size - 1);
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg);
 #else
-        /*
-         * Get the size of the memory by reading all the DRAM size values
-         * and adding them up.
-         *
-         * KLUDGE ALERT: the boards we are using have invalid column and
-         * row mux values.  We fix them here, but this will break other
-         * memory configurations.
-         */
-        pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
-        size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
-        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
-        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
-        pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
-
-        pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
-        size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
-        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
-        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
-        pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
-
-        pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
-        size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
-        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
-        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
-        pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
-
-        pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
-        size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
-        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
-        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
-        pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
-
-        /*
-         * Oops .. something went wrong
-         */
-        if( (size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
-                return -ENODEV;
-        }
-#endif /* CONFIG_MTD_PMC551_BUGFIX */
-
-	if ((cfg&PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
-                return -ENODEV;
+	/*
+	 * Get the size of the memory by reading all the DRAM size values
+	 * and adding them up.
+	 *
+	 * KLUDGE ALERT: the boards we are using have invalid column and
+	 * row mux values.  We fix them here, but this will break other
+	 * memory configurations.
+	 */
+	pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
+	size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
+	dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+	dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+	pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
+
+	pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
+	size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+	dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+	dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+	pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
+
+	pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
+	size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+	dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+	dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+	pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
+
+	pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
+	size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+	dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+	dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+	pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
+
+	/*
+	 * Oops .. something went wrong
+	 */
+	if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
+		return -ENODEV;
 	}
+#endif				/* CONFIG_MTD_PMC551_BUGFIX */
 
-        /*
-         * Precharge Dram
-         */
-        pci_write_config_word( dev, PMC551_SDRAM_MA, 0x0400 );
-        pci_write_config_word( dev, PMC551_SDRAM_CMD, 0x00bf );
-
-        /*
-         * Wait until command has gone through
-         * FIXME: register spinning issue
-         */
-        do {	pci_read_config_word( dev, PMC551_SDRAM_CMD, &cmd );
-		if(counter++ > 100)break;
-        } while ( (PCI_COMMAND_IO) & cmd );
-
-        /*
+	if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
+		return -ENODEV;
+	}
+
+	/*
+	 * Precharge Dram
+	 */
+	pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400);
+	pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf);
+
+	/*
+	 * Wait until command has gone through
+	 * FIXME: register spinning issue
+	 */
+	do {
+		pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+		if (counter++ > 100)
+			break;
+	} while ((PCI_COMMAND_IO) & cmd);
+
+	/*
 	 * Turn on auto refresh
 	 * The loop is taken directly from Ramix's example code.  I assume that
 	 * this must be held high for some duration of time, but I can find no
 	 * documentation refrencing the reasons why.
-         */
-        for ( i = 1; i<=8 ; i++) {
-                pci_write_config_word (dev, PMC551_SDRAM_CMD, 0x0df);
-
-                /*
-                 * Make certain command has gone through
-                 * FIXME: register spinning issue
-                 */
-		counter=0;
-                do {	pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
-			if(counter++ > 100)break;
-                } while ( (PCI_COMMAND_IO) & cmd );
-        }
-
-        pci_write_config_word ( dev, PMC551_SDRAM_MA, 0x0020);
-        pci_write_config_word ( dev, PMC551_SDRAM_CMD, 0x0ff);
-
-        /*
-         * Wait until command completes
-         * FIXME: register spinning issue
-         */
-	counter=0;
-        do {	pci_read_config_word ( dev, PMC551_SDRAM_CMD, &cmd);
-		if(counter++ > 100)break;
-        } while ( (PCI_COMMAND_IO) & cmd );
-
-        pci_read_config_dword ( dev, PMC551_DRAM_CFG, &dcmd);
-        dcmd |= 0x02000000;
-        pci_write_config_dword ( dev, PMC551_DRAM_CFG, dcmd);
-
-        /*
-         * Check to make certain fast back-to-back, if not
-         * then set it so
-         */
-        pci_read_config_word( dev, PCI_STATUS, &cmd);
-        if((cmd&PCI_COMMAND_FAST_BACK) == 0) {
-                cmd |= PCI_COMMAND_FAST_BACK;
-                pci_write_config_word( dev, PCI_STATUS, cmd);
-        }
-
-        /*
-         * Check to make certain the DEVSEL is set correctly, this device
-         * has a tendancy to assert DEVSEL and TRDY when a write is performed
-         * to the memory when memory is read-only
-         */
-        if((cmd&PCI_STATUS_DEVSEL_MASK) != 0x0) {
-                cmd &= ~PCI_STATUS_DEVSEL_MASK;
-                pci_write_config_word( dev, PCI_STATUS, cmd );
-        }
-        /*
-         * Set to be prefetchable and put everything back based on old cfg.
+	 */
+	for (i = 1; i <= 8; i++) {
+		pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df);
+
+		/*
+		 * Make certain command has gone through
+		 * FIXME: register spinning issue
+		 */
+		counter = 0;
+		do {
+			pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+			if (counter++ > 100)
+				break;
+		} while ((PCI_COMMAND_IO) & cmd);
+	}
+
+	pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020);
+	pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff);
+
+	/*
+	 * Wait until command completes
+	 * FIXME: register spinning issue
+	 */
+	counter = 0;
+	do {
+		pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+		if (counter++ > 100)
+			break;
+	} while ((PCI_COMMAND_IO) & cmd);
+
+	pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd);
+	dcmd |= 0x02000000;
+	pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd);
+
+	/*
+	 * Check to make certain fast back-to-back, if not
+	 * then set it so
+	 */
+	pci_read_config_word(dev, PCI_STATUS, &cmd);
+	if ((cmd & PCI_COMMAND_FAST_BACK) == 0) {
+		cmd |= PCI_COMMAND_FAST_BACK;
+		pci_write_config_word(dev, PCI_STATUS, cmd);
+	}
+
+	/*
+	 * Check to make certain the DEVSEL is set correctly, this device
+	 * has a tendancy to assert DEVSEL and TRDY when a write is performed
+	 * to the memory when memory is read-only
+	 */
+	if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
+		cmd &= ~PCI_STATUS_DEVSEL_MASK;
+		pci_write_config_word(dev, PCI_STATUS, cmd);
+	}
+	/*
+	 * Set to be prefetchable and put everything back based on old cfg.
 	 * it's possible that the reset of the V370PDC nuked the original
 	 * setup
-         */
+	 */
 	/*
-        cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
-	pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
-	*/
-
-        /*
-         * Turn PCI memory and I/O bus access back on
-         */
-        pci_write_config_word( dev, PCI_COMMAND,
-                               PCI_COMMAND_MEMORY | PCI_COMMAND_IO );
+	   cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+	   pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+	 */
+
+	/*
+	 * Turn PCI memory and I/O bus access back on
+	 */
+	pci_write_config_word(dev, PCI_COMMAND,
+			      PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
 #ifdef CONFIG_MTD_PMC551_DEBUG
-        /*
-         * Some screen fun
-         */
-        printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at 0x%llx\n",
-	       (size<1024)?size:(size<1048576)?size>>10:size>>20,
-               (size<1024)?'B':(size<1048576)?'K':'M',
-	       size, ((dcmd&(0x1<<3)) == 0)?"non-":"",
-               (unsigned long long)((dev->resource[0].start)&PCI_BASE_ADDRESS_MEM_MASK));
-
-        /*
-         * Check to see the state of the memory
-         */
-        pci_read_config_dword( dev, PMC551_DRAM_BLK0, &dcmd );
-        printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
-			  "pmc551: DRAM_BLK0 Size: %d at %d\n"
-			  "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
-               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
-               (((0x1<<0)&dcmd) == 0)?"Off":"On",
-	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
-	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
-        pci_read_config_dword( dev, PMC551_DRAM_BLK1, &dcmd );
-        printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
-			  "pmc551: DRAM_BLK1 Size: %d at %d\n"
-			  "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
-               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
-               (((0x1<<0)&dcmd) == 0)?"Off":"On",
-	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
-	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
-        pci_read_config_dword( dev, PMC551_DRAM_BLK2, &dcmd );
-        printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
-			  "pmc551: DRAM_BLK2 Size: %d at %d\n"
-			  "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
-               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
-               (((0x1<<0)&dcmd) == 0)?"Off":"On",
-	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
-	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
-        pci_read_config_dword( dev, PMC551_DRAM_BLK3, &dcmd );
-        printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
-			  "pmc551: DRAM_BLK3 Size: %d at %d\n"
-			  "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
-               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
-               (((0x1<<0)&dcmd) == 0)?"Off":"On",
-	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
-	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
-        pci_read_config_word( dev, PCI_COMMAND, &cmd );
-        printk( KERN_DEBUG "pmc551: Memory Access %s\n",
-                (((0x1<<1)&cmd) == 0)?"off":"on" );
-        printk( KERN_DEBUG "pmc551: I/O Access %s\n",
-                (((0x1<<0)&cmd) == 0)?"off":"on" );
-
-        pci_read_config_word( dev, PCI_STATUS, &cmd );
-        printk( KERN_DEBUG "pmc551: Devsel %s\n",
-                ((PCI_STATUS_DEVSEL_MASK&cmd)==0x000)?"Fast":
-                ((PCI_STATUS_DEVSEL_MASK&cmd)==0x200)?"Medium":
-                ((PCI_STATUS_DEVSEL_MASK&cmd)==0x400)?"Slow":"Invalid" );
-
-        printk( KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
-                ((PCI_COMMAND_FAST_BACK&cmd) == 0)?"Not ":"" );
-
-	pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
-	printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n"
-			   "pmc551: System Control Register is %slocked to PCI access\n"
-			   "pmc551: System Control Register is %slocked to EEPROM access\n",
-		(bcmd&0x1)?"software":"hardware",
-		(bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un");
+	/*
+	 * Some screen fun
+	 */
+	printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
+		"0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
+		size >> 10 : size >> 20,
+		(size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
+		((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
+		(unsigned long long)((dev->resource[0].start) &
+				    PCI_BASE_ADDRESS_MEM_MASK));
+
+	/*
+	 * Check to see the state of the memory
+	 */
+	pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd);
+	printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
+		"pmc551: DRAM_BLK0 Size: %d at %d\n"
+		"pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
+		(((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+		(((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+		PMC551_DRAM_BLK_GET_SIZE(dcmd),
+		((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+		((dcmd >> 9) & 0xF));
+
+	pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd);
+	printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
+		"pmc551: DRAM_BLK1 Size: %d at %d\n"
+		"pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
+		(((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+		(((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+		PMC551_DRAM_BLK_GET_SIZE(dcmd),
+		((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+		((dcmd >> 9) & 0xF));
+
+	pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd);
+	printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
+		"pmc551: DRAM_BLK2 Size: %d at %d\n"
+		"pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
+		(((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+		(((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+		PMC551_DRAM_BLK_GET_SIZE(dcmd),
+		((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+		((dcmd >> 9) & 0xF));
+
+	pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd);
+	printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
+		"pmc551: DRAM_BLK3 Size: %d at %d\n"
+		"pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
+		(((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+		(((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+		PMC551_DRAM_BLK_GET_SIZE(dcmd),
+		((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+		((dcmd >> 9) & 0xF));
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	printk(KERN_DEBUG "pmc551: Memory Access %s\n",
+		(((0x1 << 1) & cmd) == 0) ? "off" : "on");
+	printk(KERN_DEBUG "pmc551: I/O Access %s\n",
+		(((0x1 << 0) & cmd) == 0) ? "off" : "on");
+
+	pci_read_config_word(dev, PCI_STATUS, &cmd);
+	printk(KERN_DEBUG "pmc551: Devsel %s\n",
+		((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" :
+		((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" :
+		((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid");
+
+	printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
+		((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : "");
+
+	pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
+	printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n"
+		"pmc551: System Control Register is %slocked to PCI access\n"
+		"pmc551: System Control Register is %slocked to EEPROM access\n",
+		(bcmd & 0x1) ? "software" : "hardware",
+		(bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un");
 #endif
-        return size;
+	return size;
 }
 
 /*
  * Kernel version specific module stuffages
  */
 
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mark Ferrell <[email protected]>");
 MODULE_DESCRIPTION(PMC551_VERSION);
@@ -628,11 +650,11 @@ MODULE_DESCRIPTION(PMC551_VERSION);
 /*
  * Stuff these outside the ifdef so as to not bust compiled in driver support
  */
-static int msize=0;
+static int msize = 0;
 #if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
-static int asize=CONFIG_MTD_PMC551_APERTURE_SIZE
+static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE
 #else
-static int asize=0;
+static int asize = 0;
 #endif
 
 module_param(msize, int, 0);
@@ -645,172 +667,179 @@ MODULE_PARM_DESC(asize, "aperture size, 
  */
 static int __init init_pmc551(void)
 {
-        struct pci_dev *PCI_Device = NULL;
-        struct mypriv *priv;
-        int count, found=0;
-        struct mtd_info *mtd;
-        u32 length = 0;
-
-	if(msize) {
-		msize = (1 << (ffs(msize) - 1))<<20;
-		if (msize > (1<<30)) {
-			printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize);
+	struct pci_dev *PCI_Device = NULL;
+	struct mypriv *priv;
+	int count, found = 0;
+	struct mtd_info *mtd;
+	u32 length = 0;
+
+	if (msize) {
+		msize = (1 << (ffs(msize) - 1)) << 20;
+		if (msize > (1 << 30)) {
+			printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n",
+				msize);
 			return -EINVAL;
 		}
 	}
 
-	if(asize) {
-		asize = (1 << (ffs(asize) - 1))<<20;
-		if (asize > (1<<30) ) {
-			printk(KERN_NOTICE "pmc551: Invalid aperture size [%d]\n", asize);
+	if (asize) {
+		asize = (1 << (ffs(asize) - 1)) << 20;
+		if (asize > (1 << 30)) {
+			printk(KERN_NOTICE "pmc551: Invalid aperture size "
+				"[%d]\n", asize);
 			return -EINVAL;
 		}
 	}
 
-        printk(KERN_INFO PMC551_VERSION);
-
-        /*
-         * PCU-bus chipset probe.
-         */
-        for( count = 0; count < MAX_MTD_DEVICES; count++ ) {
-
-                if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI,
-                                                  PCI_DEVICE_ID_V3_SEMI_V370PDC,
-						  PCI_Device ) ) == NULL) {
-                        break;
-                }
-
-                printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
-				    (unsigned long long)PCI_Device->resource[0].start);
-
-                /*
-                 * The PMC551 device acts VERY weird if you don't init it
-                 * first.  i.e. it will not correctly report devsel.  If for
-                 * some reason the sdram is in a wrote-protected state the
-                 * device will DEVSEL when it is written to causing problems
-                 * with the oldproc.c driver in
-                 * some kernels (2.2.*)
-                 */
-                if((length = fixup_pmc551(PCI_Device)) <= 0) {
-                        printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
-                        break;
-                }
+	printk(KERN_INFO PMC551_VERSION);
+
+	/*
+	 * PCU-bus chipset probe.
+	 */
+	for (count = 0; count < MAX_MTD_DEVICES; count++) {
+
+		if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI,
+						  PCI_DEVICE_ID_V3_SEMI_V370PDC,
+						  PCI_Device)) == NULL) {
+			break;
+		}
+
+		printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
+			(unsigned long long)PCI_Device->resource[0].start);
+
+		/*
+		 * The PMC551 device acts VERY weird if you don't init it
+		 * first.  i.e. it will not correctly report devsel.  If for
+		 * some reason the sdram is in a wrote-protected state the
+		 * device will DEVSEL when it is written to causing problems
+		 * with the oldproc.c driver in
+		 * some kernels (2.2.*)
+		 */
+		if ((length = fixup_pmc551(PCI_Device)) <= 0) {
+			printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
+			break;
+		}
 
 		/*
 		 * This is needed until the driver is capable of reading the
 		 * onboard I2C SROM to discover the "real" memory size.
 		 */
-		if(msize) {
+		if (msize) {
 			length = msize;
-			printk(KERN_NOTICE "pmc551: Using specified memory size 0x%x\n", length);
+			printk(KERN_NOTICE "pmc551: Using specified memory "
+				"size 0x%x\n", length);
 		} else {
 			msize = length;
 		}
 
-                mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-                if (!mtd) {
-                        printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n");
-                        break;
-                }
-
-                memset(mtd, 0, sizeof(struct mtd_info));
-
-                priv = kmalloc (sizeof(struct mypriv), GFP_KERNEL);
-                if (!priv) {
-                        printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n");
-                        kfree(mtd);
-                        break;
-                }
-                memset(priv, 0, sizeof(*priv));
-                mtd->priv = priv;
-                priv->dev = PCI_Device;
-
-		if(asize > length) {
-			printk(KERN_NOTICE "pmc551: reducing aperture size to fit %dM\n",length>>20);
+		mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+		if (!mtd) {
+			printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
+				"device.\n");
+			break;
+		}
+
+		memset(mtd, 0, sizeof(struct mtd_info));
+
+		priv = kmalloc(sizeof(struct mypriv), GFP_KERNEL);
+		if (!priv) {
+			printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
+				"device.\n");
+			kfree(mtd);
+			break;
+		}
+		memset(priv, 0, sizeof(*priv));
+		mtd->priv = priv;
+		priv->dev = PCI_Device;
+
+		if (asize > length) {
+			printk(KERN_NOTICE "pmc551: reducing aperture size to "
+				"fit %dM\n", length >> 20);
 			priv->asize = asize = length;
 		} else if (asize == 0 || asize == length) {
-			printk(KERN_NOTICE "pmc551: Using existing aperture size %dM\n", length>>20);
+			printk(KERN_NOTICE "pmc551: Using existing aperture "
+				"size %dM\n", length >> 20);
 			priv->asize = asize = length;
 		} else {
-			printk(KERN_NOTICE "pmc551: Using specified aperture size %dM\n", asize>>20);
+			printk(KERN_NOTICE "pmc551: Using specified aperture "
+				"size %dM\n", asize >> 20);
 			priv->asize = asize;
 		}
-                priv->start = ioremap(((PCI_Device->resource[0].start)
-                                       & PCI_BASE_ADDRESS_MEM_MASK),
-                                      priv->asize);
+		priv->start = ioremap(((PCI_Device->resource[0].start)
+					& PCI_BASE_ADDRESS_MEM_MASK),
+				      priv->asize);
 
 		if (!priv->start) {
 			printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
-                        kfree(mtd->priv);
-                        kfree(mtd);
+			kfree(mtd->priv);
+			kfree(mtd);
 			break;
 		}
-
 #ifdef CONFIG_MTD_PMC551_DEBUG
-		printk( KERN_DEBUG "pmc551: setting aperture to %d\n",
-			ffs(priv->asize>>20)-1);
+		printk(KERN_DEBUG "pmc551: setting aperture to %d\n",
+			ffs(priv->asize >> 20) - 1);
 #endif
 
-                priv->base_map0 = ( PMC551_PCI_MEM_MAP_REG_EN
-				  | PMC551_PCI_MEM_MAP_ENABLE
-				  | (ffs(priv->asize>>20)-1)<<4 );
-                priv->curr_map0 = priv->base_map0;
-                pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0,
-                                         priv->curr_map0 );
+		priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN
+				   | PMC551_PCI_MEM_MAP_ENABLE
+				   | (ffs(priv->asize >> 20) - 1) << 4);
+		priv->curr_map0 = priv->base_map0;
+		pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
+					priv->curr_map0);
 
 #ifdef CONFIG_MTD_PMC551_DEBUG
-		printk( KERN_DEBUG "pmc551: aperture set to %d\n",
-			(priv->base_map0 & 0xF0)>>4 );
+		printk(KERN_DEBUG "pmc551: aperture set to %d\n",
+			(priv->base_map0 & 0xF0) >> 4);
 #endif
 
-                mtd->size 	= msize;
-                mtd->flags 	= MTD_CAP_RAM;
-                mtd->erase 	= pmc551_erase;
-                mtd->read 	= pmc551_read;
-                mtd->write 	= pmc551_write;
-                mtd->point 	= pmc551_point;
-                mtd->unpoint 	= pmc551_unpoint;
-                mtd->type 	= MTD_RAM;
-                mtd->name 	= "PMC551 RAM board";
-                mtd->erasesize 	= 0x10000;
-                mtd->writesize  = 1;
-                mtd->owner = THIS_MODULE;
-
-                if (add_mtd_device(mtd)) {
-                        printk(KERN_NOTICE "pmc551: Failed to register new device\n");
+		mtd->size = msize;
+		mtd->flags = MTD_CAP_RAM;
+		mtd->erase = pmc551_erase;
+		mtd->read = pmc551_read;
+		mtd->write = pmc551_write;
+		mtd->point = pmc551_point;
+		mtd->unpoint = pmc551_unpoint;
+		mtd->type = MTD_RAM;
+		mtd->name = "PMC551 RAM board";
+		mtd->erasesize = 0x10000;
+		mtd->writesize = 1;
+		mtd->owner = THIS_MODULE;
+
+		if (add_mtd_device(mtd)) {
+			printk(KERN_NOTICE "pmc551: Failed to register new "
+				"device\n");
 			iounmap(priv->start);
-                        kfree(mtd->priv);
-                        kfree(mtd);
-                        break;
-                }
-
-                /* Keep a reference as the add_mtd_device worked */
-                pci_dev_get(PCI_Device);
-
-                printk(KERN_NOTICE "Registered pmc551 memory device.\n");
-                printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
-                       priv->asize>>20,
-                       priv->start,
-                       priv->start + priv->asize);
-                printk(KERN_NOTICE "Total memory is %d%c\n",
-	       		(length<1024)?length:
-				(length<1048576)?length>>10:length>>20,
-               		(length<1024)?'B':(length<1048576)?'K':'M');
+			kfree(mtd->priv);
+			kfree(mtd);
+			break;
+		}
+
+		/* Keep a reference as the add_mtd_device worked */
+		pci_dev_get(PCI_Device);
+
+		printk(KERN_NOTICE "Registered pmc551 memory device.\n");
+		printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
+			priv->asize >> 20,
+			priv->start, priv->start + priv->asize);
+		printk(KERN_NOTICE "Total memory is %d%c\n",
+			(length < 1024) ? length :
+			(length < 1048576) ? length >> 10 : length >> 20,
+			(length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
 		priv->nextpmc551 = pmc551list;
 		pmc551list = mtd;
 		found++;
-        }
+	}
 
-        /* Exited early, reference left over */
-        if (PCI_Device)
-        	pci_dev_put(PCI_Device);
+	/* Exited early, reference left over */
+	if (PCI_Device)
+		pci_dev_put(PCI_Device);
 
-        if( !pmc551list ) {
-                printk(KERN_NOTICE "pmc551: not detected\n");
-                return -ENODEV;
-        } else {
+	if (!pmc551list) {
+		printk(KERN_NOTICE "pmc551: not detected\n");
+		return -ENODEV;
+	} else {
 		printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);
-                return 0;
+		return 0;
 	}
 }
 
@@ -819,24 +848,24 @@ #endif
  */
 static void __exit cleanup_pmc551(void)
 {
-        int found=0;
-        struct mtd_info *mtd;
+	int found = 0;
+	struct mtd_info *mtd;
 	struct mypriv *priv;
 
-	while((mtd=pmc551list)) {
+	while ((mtd = pmc551list)) {
 		priv = mtd->priv;
 		pmc551list = priv->nextpmc551;
 
-		if(priv->start) {
-			printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n",
-				priv->asize>>20, priv->start);
-			iounmap (priv->start);
+		if (priv->start) {
+			printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
+				"0x%p\n", priv->asize >> 20, priv->start);
+			iounmap(priv->start);
 		}
 		pci_dev_put(priv->dev);
 
-		kfree (mtd->priv);
-		del_mtd_device (mtd);
-		kfree (mtd);
+		kfree(mtd->priv);
+		del_mtd_device(mtd);
+		kfree(mtd);
 		found++;
 	}
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux