Tom St Denis wrote:
I've been using the 2.6.17 series with "all-generic-ide irqpoll" on a
Gigabyte 965P-S3 motherboard [using the ICH8 chipset].
It worked semi decent [other than random interrupt 177 hehehe].
However, this morning I took the same .config and applied it to 2.6.18
with some nasties. It compiled fine, the disks work now (my SATA
drives also show up as /dev/sd* finally) but now the sky2 device
disappeared.
lspci can still see it, it's a Marvell "Uknown Device 4364, rev 12"
sitting off the PCI-E bus.
This device was not listed in the 2.6.17 sky2 driver and is not included
in the 2.6.18 version either. Either you modified your 2.6.17 kernel or
your distro did.
You can simply add the device ID to the list in 2.6.18. Patches to do
this are already on their way to mainline for 2.6.19.
Daniel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
