On 19 Sep 2006 10:01:55 +0200, Andi Kleen <[email protected]> wrote:
"Jesper Juhl" <[email protected]> writes: > Hi, > > If I enable the math emulator in 2.6.18-rc7-git2 (only version I've > tried this with) and then boot the kernel with "no387" then I only get > as far as lilo's "...Booting the kernel." message and then the system > hangs. > > The kernel is a 32bit kernel build for K8 and my CPU is a Athlon64 X2 4400+ Do you have a .config? I tried it and it booted until mounting root.
The config is attached. I've also attached the complete dmesg output from a working boot of this kernel. Below is the output of scripts/ver_linux to give you an idea of the build environment and some lspci and various other details so you can also get a good idea about the hardware. Hope that's enough, otherwise just ask for whatever you may need. juhl@dragon:~/download/kernel/linux-2.6.18-rc7-git2$ scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux dragon 2.6.18-rc7-git2 #1 SMP PREEMPT Mon Sep 18 23:58:12 CEST 2006 i686 athlon-4 i386 GNU/Linux Gnu C 3.4.6 Gnu make 3.81 binutils 2.15.92.0.2 util-linux 2.12r mount 2.12r module-init-tools 3.2.2 e2fsprogs 1.39 reiserfsprogs 3.6.19 quota-tools 3.13. PPP 2.4.4b1 Linux C Library 2.3.6 Dynamic linker (ldd) 2.3.6 Linux C++ Library 6.0.3 Procps 3.2.7 Net-tools 1.60 Kbd 1.12 Sh-utils 5.97 udev 097 Modules Loaded snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss agpgart snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep evdev snd juhl@dragon:~/download/kernel/linux-2.6.18-rc7-git2$ uname -a Linux dragon 2.6.18-rc7-git2 #1 SMP PREEMPT Mon Sep 18 23:58:12 CEST 2006 i686 athlon-4 i386 GNU/Linux juhl@dragon:~/download/kernel/linux-2.6.18-rc7-git2$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 35 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping : 2 cpu MHz : 2200.196 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp bogomips : 4402.85 processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 35 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping : 2 cpu MHz : 2200.196 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp bogomips : 4399.52 root@dragon:/home/juhl/download/kernel/linux-2.6.18-rc7-git2# lspci -vvx 00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express and HyperTransport] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [40] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.05 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [5c] HyperTransport: MSI Mapping Capabilities: [68] HyperTransport: UnitID Clumping Capabilities: [74] HyperTransport: Interrupt Discovery and Configuration Capabilities: [7c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 00000000fee00000 Data: 0000 00: b9 10 95 16 07 00 10 00 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: ALi Corporation PCI Express Root Port (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ff200000-ff2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 00000000fee00000 Data: 0000 Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <2us, L1 <32us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [7c] HyperTransport: MSI Mapping Capabilities: [88] HyperTransport: Revision ID: 1.05 00: b9 10 4b 52 06 01 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00 20: 20 ff 20 ff f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 00 00:02.0 PCI bridge: ALi Corporation PCI Express Root Port (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: ff300000-ff3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 00000000fee00000 Data: 0000 Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port 0 Link: Latency L0s <2us, L1 <32us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [7c] HyperTransport: MSI Mapping Capabilities: [88] HyperTransport: Revision ID: 1.05 00: b9 10 4c 52 06 01 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 00 20: 30 ff 30 ff f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 00 00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M] Capabilities: [40] HyperTransport: Slave or Primary Interface Command: BaseUnitID=4 UnitCnt=1 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=8bit DwFcOut- LWI=16bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.04 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [60] HyperTransport: Interrupt Discovery and Configuration Capabilities: [80] AGP version 3.0 Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00: b9 10 89 16 06 01 10 00 00 00 00 06 00 00 00 00 10: 08 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00:05.0 PCI bridge: ALi Corporation AGP8X Controller (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: ff400000-ff4fffff Prefetchable memory behind bridge: c7f00000-d7efffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 00: b9 10 46 52 07 01 20 00 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 f0 00 20 22 20: 40 ff 40 ff f0 c7 e0 d7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00 00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ff500000-ff5fffff Prefetchable memory behind bridge: 88000000-880fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00: b9 10 49 52 07 01 00 00 00 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 20 d0 d0 00 22 20: 50 ff 50 ff 00 88 00 88 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70) Subsystem: ASRock Incorporation Unknown device 1563 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 6000ns max) 00: b9 10 63 15 0f 00 00 02 70 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 15 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 18 00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU] Subsystem: ASRock Incorporation Unknown device 7101 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 71 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:11.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 40) Subsystem: ASRock Incorporation Unknown device 5263 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 10000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at e800 [size=256] Region 1: Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: b9 10 63 52 07 01 10 02 40 00 00 02 08 20 00 00 10: 01 e8 00 00 00 fc 6f ff 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 52 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 14 28 00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation Unknown device 5229 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at ff00 [size=16] 00: b9 10 29 52 05 00 a0 02 c7 8a 01 01 00 20 00 00 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 20: 01 ff 00 00 00 00 00 00 00 00 00 00 49 18 29 52 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Unknown device 5237 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K] 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 10: 00 e0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 50 00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Unknown device 5237 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 3 Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K] 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 10: 00 d0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 50 00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Unknown device 5237 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K] 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 10: 00 c0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50 00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Unknown device 5239 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at ff6ff800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00: b9 10 39 52 16 01 b0 02 01 20 03 0c 10 20 80 00 10: 00 f8 6f ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 52 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 10 20 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA Parhelia AGP (rev 03) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Parhelia 128Mb Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ff4fe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at ff4c0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [f0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00: 2b 10 27 05 07 00 b0 02 03 00 00 03 10 20 00 00 10: 08 00 00 c8 00 e0 4f ff 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 40 08 30: 00 00 4c ff dc 00 00 00 00 00 00 00 05 01 10 20 04:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) Subsystem: Creative Labs SBLive! 5.1 eMicro 28028 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at d880 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 11 02 00 05 01 90 02 0a 00 01 04 00 20 80 00 10: 81 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 67 80 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 02 14 04:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 Region 0: I/O ports at dc00 [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 11 02 70 05 01 90 02 0a 00 80 09 00 20 80 00 10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 04:06.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) Subsystem: Adaptec 29160N Ultra160 SCSI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 BIST result: 00 Region 0: I/O ports at d400 [disabled] [size=256] Region 1: Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at 88000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 05 90 80 00 16 01 b0 02 02 00 00 01 10 20 00 80 10: 01 d4 00 00 04 f0 5f ff 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 05 90 a0 62 30: 00 00 5c ff dc 00 00 00 00 00 00 00 03 01 28 19 04:07.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 42) Subsystem: D-Link System Inc DFE-530TX rev B Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at d000 [size=256] Region 1: Memory at ff5fec00 (32-bit, non-prefetchable) [size=256] Expansion ROM at 88020000 [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 65 30 17 01 10 02 42 00 00 02 10 20 00 00 10: 01 d0 00 00 00 ec 5f ff 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 11 01 14 30: 00 00 ff ff 40 00 00 00 00 00 00 00 0b 01 03 08 root@dragon:/home/juhl/download/kernel/linux-2.6.18-rc7-git2# cat /proc/modules snd_seq_oss 34896 0 - Live 0xf8eef000 snd_seq_midi_event 7048 1 snd_seq_oss, Live 0xf8cef000 snd_seq 54456 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8ce0000 snd_pcm_oss 46560 0 - Live 0xf8cd3000 snd_mixer_oss 16776 2 snd_pcm_oss, Live 0xf8cf8000 agpgart 31324 0 - Live 0xf8d01000 snd_emu10k1 120784 2 - Live 0xf8bd2000 snd_rawmidi 21632 1 snd_emu10k1, Live 0xf8b91000 snd_ac97_codec 95544 1 snd_emu10k1, Live 0xf8bb9000 snd_ac97_bus 2624 1 snd_ac97_codec, Live 0xf8b8f000 snd_pcm 80236 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec, Live 0xf8ba4000 snd_seq_device 7572 4 snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi, Live 0xf8b8c000 snd_timer 23132 3 snd_seq,snd_emu10k1,snd_pcm, Live 0xf8b85000 snd_page_alloc 8712 2 snd_emu10k1,snd_pcm, Live 0xf8b81000 snd_util_mem 4104 1 snd_emu10k1, Live 0xf887d000 snd_hwdep 8332 1 snd_emu10k1, Live 0xf8ba0000 evdev 8960 0 - Live 0xf8879000 snd 50980 13 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep, Live 0xf8c2a000 root@dragon:/home/juhl/download/kernel/linux-2.6.18-rc7-git2# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 03c0-03df : vesafb 03f2-03f5 : floppy 03f7-03f7 : floppy DIR 03f8-03ff : serial 0800-083f : 0000:00:07.1 0800-0803 : ACPI PM1a_EVT_BLK 0804-0805 : ACPI PM1a_CNT_BLK 0808-080b : ACPI PM_TMR 0810-0815 : ACPI CPU throttle 0818-0827 : ACPI GPE0_BLK 0830-0830 : ACPI PM2_CNT_BLK 0cf8-0cff : PCI conf1 d000-dfff : PCI Bus #04 d000-d0ff : 0000:04:07.0 d000-d0ff : via-rhine d400-d4ff : 0000:04:06.0 d880-d89f : 0000:04:05.0 d880-d89f : EMU10K1 dc00-dc07 : 0000:04:05.1 e800-e8ff : 0000:00:11.0 ff00-ff0f : 0000:00:12.0 root@dragon:/home/juhl/download/kernel/linux-2.6.18-rc7-git2# cat /proc/iomem 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c8fff : Video ROM 000c9000-000ce3ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-7ffaffff : System RAM 00100000-0032d81c : Kernel code 0032d81d-00413b2f : Kernel data 7ffb0000-7ffbffff : ACPI Tables 7ffc0000-7ffeffff : ACPI Non-volatile Storage 7fff0000-7fffffff : reserved 88000000-880fffff : PCI Bus #04 88000000-8801ffff : 0000:04:06.0 88020000-8802ffff : 0000:04:07.0 c7f00000-d7efffff : PCI Bus #03 c8000000-cfffffff : 0000:03:00.0 c8000000-c8ffffff : vesafb dc000000-dfffffff : 0000:00:04.0 ff200000-ff2fffff : PCI Bus #01 ff300000-ff3fffff : PCI Bus #02 ff400000-ff4fffff : PCI Bus #03 ff4c0000-ff4dffff : 0000:03:00.0 ff4fe000-ff4fffff : 0000:03:00.0 ff500000-ff5fffff : PCI Bus #04 ff5fec00-ff5fecff : 0000:04:07.0 ff5fec00-ff5fecff : via-rhine ff5ff000-ff5fffff : 0000:04:06.0 ff5ff000-ff5fffff : aic7xxx ff6fc000-ff6fcfff : 0000:00:13.2 ff6fd000-ff6fdfff : 0000:00:13.1 ff6fe000-ff6fefff : 0000:00:13.0 ff6ff800-ff6ff8ff : 0000:00:13.3 ff6ffc00-ff6ffcff : 0000:00:11.0 ff7c0000-ffffffff : reserved -- Jesper Juhl <[email protected]> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html
Attachment:
config.gz
Description: GNU Zip compressed data
Attachment:
dmesg-2.6.18-rc7-git2
Description: Binary data
- Follow-Ups:
- Re: Math-emu kills the kernel on Athlon64 X2
- From: Andi Kleen <[email protected]>
- Re: Math-emu kills the kernel on Athlon64 X2
- From: Linus Torvalds <[email protected]>
- Re: Math-emu kills the kernel on Athlon64 X2
- References:
- Math-emu kills the kernel on Athlon64 X2
- From: "Jesper Juhl" <[email protected]>
- Re: Math-emu kills the kernel on Athlon64 X2
- From: Andi Kleen <[email protected]>
- Math-emu kills the kernel on Athlon64 X2
- Prev by Date: Re: [PATCH] x86_64/i386: Rework thermal throttling detection/handling code for Intel P4/Xeons.
- Next by Date: Re: [PATCH] leds: turn LED off when changing triggers
- Previous by thread: Re: Math-emu kills the kernel on Athlon64 X2
- Next by thread: Re: Math-emu kills the kernel on Athlon64 X2
- Index(es):